Custom Fit Roof Rack Kit With Y00427 | Y06185 | Y28TR
Item # Y76KB
Our Price: $688.80
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
- All Info
- Reviews (108)
- Q & A (0)
- Videos (26)
- Photos
Yakima Roof Rack - Y76KB
- Aero Bars
- Crossbars
- 70 Inch Bar Space
- Yakima
- Black
- Overhang
- 2 Bars
Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity.
Features:
Yakima 70" JetStream LG - Black:- Quiet, low-profile crossbars let you build an aftermarket roof rack for your vehicle
- Pair with Yakima towers and a fit kit to create a complete roof rack
- Asymmetrical JetFlow shape creates an extremely aerodynamic roof rack system
- Built-in WindRidges help control air flow over bars to dramatically reduce wind noise and vibration
- Aero-style bars reduce drag to help maintain fuel efficiency
- Full-length design maximizes space for carriers and accessories
- Versatile crossbars accommodate accessories that mount in the T-slots or clamp around the bars
- Works with most universal-mount bike, water, snow, and cargo carriers
- Rubber SmartFill strips in T-slots allow for easy installation of channel-mounted accessories
- Simply push down on the SmartFill strips to slide in accessories - no trimming required
- Bottom channels allow for easy installation on Yakima towers
- Fit BaseLine, RidgeLine, SkyLine, and TimberLine towers
- Etched measurements on bottoms of bars help center rack on your roof
- Lightweight aluminum bars are durable and rustproof
- Internal JetTruss extrusions provide exceptional bar strength
- Black powder coat finish is corrosion resistant
Yakima BaseClip 185:
- Custom-fit mounting clips and pads allow you to mount BaseLine towers on your vehicle with a naked roof
- Padded, stainless steel clips provide secure grip on your door jambs
- Snap onto DropHooks inside towers
- Protect door jambs from scratches and abrasions
- Powder coated for durability and rust resistance
- Molded rubber pads fit the contours of your roof
- Clip onto bottoms of towers
- Protect roof from scratches and abrasions
Yakima BaseLine Towers (4-pack) (w/new covers):
- 4 Heavy-duty towers mount Yakima crossbars to your vehicle with a naked roof
- Pair with 2 Yakima crossbars and BaseClips to create a complete roof rack
- Tower pitch can be adjusted 6 degrees forward and 6 degrees backward to level your crossbars
- Pivoting bases can be adjusted during installation to ensure towers are seated correctly
- Versatile BarBeds are curved to accommodate the elliptical shape of Yakima CoreBar and JetStream crossbars
- Also fit RoundBar crossbars with adapter
- Safe and easy installation with DropHook system and included torque tool
- DropHook clip holder adjusts on 3 axes for perfect fit on your naked roof
- BaseClips attach to hooks in tower assemblies and tighten for a secure grip
- Torque tool clicks 3 times when clips are secure - eliminates fear of under- or over-tightening
- Lockable with Yakima Same Key System (SKS) lock cores (Y07204 - sold separately)
- Weather-resistant stainless steel, glass-reinforced plastic, and elastomer construction with matte finish
8000427 Yakima Jet Stream Cross Bars - Aluminum - 70" Long - Qty 2 - Black
8006185 Custom Base Clips and Pads for Yakima Base Line Towers
8000162 Yakima Base Line Towers for CoreBar, JetStream, and RoundBar Cross Bars - Bare Roofs - Qty 4
Replaces 8000146
Video of Custom Fit Roof Rack Kit With Y00427 | Y06185 | Y28TR
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Yakima BaseLine Roof Rack Towers BaseClip Fit Kit Review
Hi, everyone, Aidan here with etrailer. Today, we're gonna be taking a look at the Yakima BaseClip Fit Kit for your Yakima BaseLine FX Roof Rack Kits. Now, this is gonna be the rubber pad and the clamps that actually hold the whole roof rack system in place and make it a custom fit for your various different vehicles. Now, that being said, there's tons of different kits out there on our website for different vehicles, all of those pads are gonna be molded somewhat differently to adapt to different roof shapes, so do plug in your vehicle information into our fit guide and find the right fit kit for you and your vehicle, but it's gonna be a look at the overall system, how it works, and how it functions with the roof rack. So the main two parts of this are gonna be the rubber pad and the clamp, but let's talk about that rubber pad first. It's gonna be custom molded to your vehicle, so you can see really well right here on this lip, it forms around that ridge on the roof and fits snugly into place there to make sure that nothing is moving around and it's fit custom to that area.
Now, the base of that fit kit is what actually clips into the tower here and serves as the connection point between the crossbar roof rack system and your vehicle. That rubber base to it is going to give you the maximum protection and make sure that you're not scratching or scuffing any paint on your roof, and it keeps things nice and sealed up. Now, the stainless steel clip is what also helps to secure it to our roof, that's gonna be the second main component. It's a stainless steel construction and a black powder coat finish, the finish helps it match the whole roof rack system, but it all helps it resists rust and corrosion. Now, the inside of those clips are gonna have a rubber padding, again, so there's no metal on metal contact with our paint or anything, and then you can see here, it's custom fit, hooking inside our door jam, and whenever I close the door, it'll just fit right around there, making sure that it's a nice custom fit.
It attaches up inside the tower right up through here, and it just tightens down, hooking into a slotted opening hole, and then that's what gets it all secured and what helps it join into the tower system. These fit kits come in pairs, one for the passenger's side and one for the driver's side. Now, the reason they do that is because depending on your vehicle, you're probably gonna have a different fit kit for the front and rear. Yakima does a lot of research and development into making sure it's a custom fit for the vehicle, and the one we have it on here today, the Honda Civic, is a perfect example. You can even visually see how much longer the clamp at the back is compared to this clamp up at the front.
So clearly, we're gonna need a different kit for the front end, because there's just less distance for that clamp to travel. So again, plug in your vehicle information to our fit guide, make sure you find the right kits for you, and make sure that you also have the right set for the front and rear. But that's really all there is to it. The BaseClip system is gonna work really well in tandem with that BaseLine roof rack system, and it's really just coming down to making sure you get the right fit for your vehicle, because without that fit kit, you don't have a roof rack. But that'll do it for our look at these BaseClip Fit Kits for your Yakima BaseLine Roof Rack Systems.
Thanks for watching.
Customer Reviews
Custom Fit Roof Rack Kit With Y00427 | Y06185 | Y28TR - Y76KB
Average Customer Rating: 4.8 out of 5 stars (108 Customer Reviews)
Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity.by: TimN03/19/2024
Chevrolet Silverado
Excellent solution for my 2023 Chevy Silverado. In the past, I have had rails installed on the roof of my pickup trucks, but I find the BaseLine towers to be a better solution, since they don't permanently change the truck. Plus, they are much more solid than SkyLine system on the rails.
by: Todd06/24/2023
Really easy to install & work as specified. So happy with the customer support/service at etrailer.
by: 04/01/2024
Follow the instructions, and you can't go wrong on the self installation
by: Dave02/11/2024
Love my Yakima roof rack!! It exceeds my expectations.great product. Also thank etrailer for the tec support! great staff always there to help thanks again!!
by: Paul08/16/2023
Ackage came 2 days early the install was somewhat easy (did it by myself)
Did not get to mount anything to it but seems really sturdy. One thing I can say is mark out your mounting points with provided stickers then put up and make adjustments to the roof rack.
by: Todd06/24/2023
These bars are the cats meow! Love the look of an aircraft wing. Easily supported our 2 kayaks.
by: Roland01/08/2024
Well packaged and on time
by: Richard R02/20/2023
GMC Canyon
So far so good. Purchased these towers to use on a 2022 GMC Canyon with HD bars that I already had, primarily to carry my canoe. Yakima's fitting instructions worked perfectly and the whole system seems really solid.
by: John 09/06/2023
Your notice of schemes was a lot better than the yakima site provided. They did not suggest the scheme you did.
But when the products arrived, the instructions were by yakima. Generally worked as instructed except the tower to tower transverse mounting dimensions needed to be tweaked for a perfect fit.
by: Todd 06/24/2023
Look great & perform outstanding. Would recommend this product to anyone where applicable.
by: Moparnut22808/20/2023
Great product fast shipping
by: Andrew08/01/2023
Great! Easy to install!
by: Doug02/16/2022
First trip with the new rail system and it looks like it worked out just fine. Thanks to both of you and Kimberly for all of your help and follow up I do appreciate it.
by: Jason04/10/2023
They do the job but have loosened up and needed readjusting a couple times over the almost 20,000 miles we’ve put on them since installing. Overall, good, just check periodically for loosening.
by: Ian 07/02/2023
Mazda
Solid build quality and easy installation on my '21 Mazda CX-5.
by: Greg 06/07/2023
Nicole was beyond helpful!!!
by: Shelli06/24/2020
So far this has been a great product except for the cover on one of the legs flew off and got all scuffed up on the road -- luckily my husband saw it and stopped but other than that it seems to work as it should, unfortunately, we have only been able to use it a few times. But so far so good. We will be looking for accessories to add to it.
by: Richard 04/06/2023
Good transaction. Arrived quickly, new in box.
by: Ricardo03/03/2021
The JetStream crossbars are awesome. Unfortunately the box that these came ' in was damaged, and when I opened it both crossbars had scratches. It is only cosmetic, but when you pay top dollars for a good product you expect that it will be well packaged so is not damaged when shipped. If it wasn’t for the damaged packaging and scratches I would give it 5 starts.
by: Leslie 02/10/2023
Roof rack parts were ordered correctly and shipped quickly.
by: Orlando12/05/2022
Hi, the company, good profesinal service. The product, all I pay was there. Very easy to install. Thanks Bless
by: Jerry 11/20/2021
Great price and lightning fast delivery. This is my 3rd purchase from etrailer.com and their service and quality are second to none. Highly recommend.
by: Rebecca 12/31/2022
Great fit, feels really sturdy, excellent directions
by: Frederick08/22/2019
excellent design with easy to follow in structions
25
779
Show More Reviews
See what our Experts say about this Yakima Roof Rack
- Recommended Roof Rack and Ski/Snowboard Carrier for 2015 Mazda CX-5 with Naked RoofI highly recommend using the Yakima JetStream roof rack for your 2015 Mazda CX-5 because it has a 165 lb weight capacity, mounts directly to fixed points on your roof, and allows you to use a variety of other roof mount accessories. This consists of the SkyLine Towers # Y53TR, Landing Pad 11 # Y00233, and then your choice of JetStream Bars: 50" Black # Y00425 60" Black # Y00426 70" Black # Y00427 You can then use the Yakima FreshTrack # Y03093 and the Lock Core Set # Y07206 to make...
view full answer... - How To Install Yakima LockNLoad Over Truck Bed with Tonneau CoverIn order to install the Yakima LockNLoad Platform Roof Tray above a tonneau cover on a truck bed you will need to install a set of tracks alongside the bed rails along with a crossbar system. The crossbar system is needed because the tray is not wide enough to reach just the mounting feet on the tracks. I have attached the needed parts below: Yakima JetStream Crossbars part # Y00427 Yakima Tracks for Roof Racks part # Y01135 Landing Pad Yakima Control Towers part # Y00221 (2) SkyLine Towers...
view full answer... - Is thule Hullavator Compatible with Yakima JetStream Bars for SNUGTOP Cap on 2018 Toyota TacomaThe Thule Hullavator Pro # TH898 is compatible with the Yakima JetStream bars as long as they stick out past the side of your SNUGTOP truck cap 4" - 8" so that it doesn't make contact with your truck cap (see attached photo). If you are just getting the Yakima tracks on your SNUGTOP cap then you also need 2 sets of the Landing Pad 1 # Y00221, Yakima SkyLine Towers # Y53TR, and a set of the JetStream bars. The JetStream bar sets are available in the following colors and lengths: Black...
view full answer...
- Are Rhino-Rack and Yakima Lock Cores Interchangeable for a 2013 Ram 2500The Rhino-Rack key and lock systems are not interchangeable with the Yakima SKS lock systems. I noticed you are looking at # Y02-500B which mounts in tracks. The tracks would have to be installed by drilling into the vehicle roof. If you want to avoid that and still have a Yakima rack you can look at other roof rack options for your 2013 Ram 2500. Provided that the truck has the Crew Cab you can use the following Yakima roof rack parts: JetStream Bars # Y00427 or CoreBars # Y00423 BaseLine...
view full answer... - Yakima Roof Rack and Bike Rack Recommendation for Tracks on a Pop-Up CamperFrom the looks of your photos, you have the Yakima Round Crossbars like the # Y00411 along with the old Control Towers # Y8890027. If you are looking for a newer model of crossbars that have a more aerodynamic design that fit into the tracks, I recommend the following setup: - Yakima JetStream Crossbars - 70" # Y00427 - Yakima SkyLine Towers # Y53TR - 2 sets of the Landing Pad 1 # Y00221 - Same-Key Locks # Y07204 With this setup, the JestStream crossbars create a much quieter ride and...
view full answer...
- Roof Rack Recommendation to use Thule Hullavator # TH898 on a 2021 Ram 1500We definitely have the setup you need to use the Thule Hullavator Pro # TH898 on your 2021 Ram 1500 with a bare roof. Whether you have a Crew Cab or Quad Cab, the absolute best option is to use the following Yakima setup: - BaseLine Towers for Yakima Crossbars # Y28TR - BaseClip Fit Kit # Y06135 - Same-Key Lock Cores # Y07204 As far as the crossbars themselves, one of the things we need to make sure is that you have the required 4 inches of overhang past the towers in order for the...
view full answer...
- Recommended Roof Rack for a Hullavator on a 2011 Toyota Venza w/ the Moonroof and No Side Rails To use the Thule Hullavator item # TH898 on your 2011 Toyota Venza you're going to need to install a set of crossbars that extend 4" - 8" past the roof racks legs. This allows the lift assist function of the Hullavator to work. Since your Venza does not have a roof rack and you have the glass roof there aren't many options. There is a roof rack that will work for you since you do not have the side rails. You will want the roof rack by Yakima and it includes the following parts: Yakima...
view full answer... - Longest Crossbar Roof Rack for 2018 Subaru Outback Wagon with Raised RailsFor your 2018 Subaru Outback Wagon the longest crossbar roof rack we is the Malone part # MPG216 which has 58 inch bars and is confirmed as a fit. For a Yakima solution that is longer you could use the # Y00148, # Y00241, and # Y00426 for a 60 inch bar or part # Y00427.
view full answer... - Longest Roof Rack Bars That Fit a 2015 Subaru Impreza HatchbackSince you are wanting to use crossbars that may be longer than what is recommended from the manufacturer I would go with a Yakima system. Their JetStream Crossbars have a track system on the bottom that allow them to be more versatile than many other roof racks from competitors. If your 2015 Subaru Impreza Hatchback has a naked roof then you need the SkyLine Towers # Y53TR and Landing Pad 11 # Y00233. For raised rails you simply need the TimberLine Towers # Y00147. In addition to the...
view full answer... - Is Thule Hullavator Kayak Carrier Compatible with Yakima Jetstream CrossbarsThe Thule Hullavator Lift-Assisted Pro Kayak Carrier # TH898 will fit on the majority of roof rack crossbar shapes, including Thule's own square bars, WingBar Evo aero bars like # TH711420, as well as the Yakima JetStream bars like # Y00427. It also fits most factory bars. The Hullavator is a unique kayak carrier that helps those of us that can't or simply don't want to lift their kayak up to a pickup truck's roof level. (We're 'yakkers, and we know how much fun that isn't). No matter...
view full answer...
- Will the Truck Hero Elevate Rack System Work With Yakima Roof RackYes, the TS (T-Slot) Rails for Truck Hero Elevate Rack System part # TH85FR is a universal track system that works with most inside the bed rail mounted tonneau covers. The tracks will then accept pretty much any track mounted accessory. In order to add a Yakima system you would need the following: SkyLine Towers for Yakima Crossbars part # Y53TR Landing Pad 1 for Yakima Control Towers part # Y00221 (2) Yakima JetStream Crossbars part # Y00427
view full answer... - Will Yakima SkinnyWarrior and SkyBox 16 Carriers Fit 60 Inch JetStream CrossbarsThe Yakima SkinnyWarrior # Y07014 is 23" wide while the Yakima SkyBox NX 16 # Y95AV is 35" wide. This means both products will take up 59" of crossbar space so mathematically they will fit on the crossbars but the problem you're going to encounter is opening up the SkyBox since it will have to tilt in towards the SkinnyWarrior. It may works out but it's going to be a tight squeeze. You could swap out your 60" bars for the longer 70" JetStream Crossbars # Y00427 but that's a pretty big...
view full answer... - Yakima Roof Rack For 2016 Chevrolet Silverado 1500There are many different parts that are needed for various vehicles, so it is difficult to piece together complete package kits for each and every vehicle on the road which is why you sometimes see a few parts that are required for a complete roof rack. If you go into our vehicle fit guide and enter in all of your vehicle's information, you should be able to see every part that is required for each roof rack system. It looks like you were checking out the BaseLine Towers # Y28TR. These...
view full answer... - Is The T-Track Adapter For Thule Cargo Boxes W/ PowerClick Compatible With Yakima Jetstream?Yes, the T-Track Adapter for Thule Cargo Boxes with PowerClick # TH27PQ will work with your Yakima Jetstream Crossbars # Y00427. This will eliminate the need for you to secure your Thule Sonic XL Cargo Carrier around your cross bars, and will simply secure into the t-tracks of your Jetstream Crossbars.
view full answer... - Roof Rack Tracks & Crossbars For 2014 Dodge Grand CaravanSo what you can do is install tracks on the top of your 2014 Dodge Grand Caravan and then install the roof rack system in those tracks. You'll need to measure to find the right length of tracks, as well as the correct crossbar width, but here's exactly what you'll need: - Yakima Tracks for Roof Racks - 42" Long # Y01126, 54" Long # Y01127, or 60" Long # Y01135 - Landing Pad 1 # Y00221 (You'll need to order Qty 2 of this part number) - SkyLine Towers for Yakima Crossbars # Y53TR - Yakima...
view full answer... - Recommended Roof Rack for a 2022 Mercedes-Benz Sprinter 2500I have the perfect solution for you with the Yakima JetStream roof rack: 70" JetStream Crossbars - # Y00427 SkyLine Towers - # Y53TR Landing Pad 1 - # Y00221 Lock Core Kit - # Y07204 (optional) This is designed to fit flush rails with a track like what you have on your 2022 Mercedes-Benz Sprinter 2500 so that you can slide the crossbars front and back depending on what you'll be carrying. I really like this rack system because it has some fined-tuned steps that give you the best fit possible,...
view full answer... - Roof Rack Recommendation for 2007 Ford F-350 Super DutyThe Whispbar roof racks were discontinued awhile back, so unfortunately we won't be getting any more of the K469 clamp kits in. To provide a roof rack on your 2007 Ford F-250, I'd recommend a Yakima JetStream roof rack that would be assembled from the following parts: • 70 Inch JetStream Aero-Style Crossbar, part # Y00427 • Yakima BaseLine Roof Rack Towers, part # Y28TR • Yakima Vehicle-Specific Fit Clips, part # Y79QR I've linked to a product demonstration video featuring the Yakima...
view full answer... - What Rack is Needed to Fit Two Thule Hullavators on a 2020 Ford Expedition?Mounting two Hullavators # TH898 requires 57 inches of crossbar length (inside of the mounting points) and a minimum of four inches on both ends outside of the feet to operate. With that being said, you will need crossbars with a minimum length of 65 inches. The Yakima JetStream crossbars 70-inches # Y00427 will do the trick. The towers you need are the TimberLine Towers for Yakima Crossbars - Raised, Factory Side Rails # Y33TR. However, I called my contact with Thule and he strongly...
view full answer... - Recommended Roof Rack for a 2022 Ford Escape w/ a Naked Roof and Two Hullavators You don't need 70" crossbars if you go with a different roof rack system which I highly recommend. Mounting two Hullavators item # TH898 is feasible and you will most likely be breaking the law if you stick a 70" wide crossbar on your Escape's roof. For your 2022 Ford Escape with a naked roof, I recommend the roof rack by Rhino-Rack and it includes the following parts: Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 65" Long - Qty 2 item # RRVA165B-2 Rhino-Rack 2500 Series Legs...
view full answer... - Can 70 Inch Yakima JetStream Crossbars be Cut on 2021 Ford F-350 Crew CabWe have a similar option for you, but you do not want to cut or trim down the Yakima JetStream Crossbars # Y00427. Instead, there are different Yakima bars that are designed to be cut down if needed, called CoreBars. The 70 inch CoreBars, and rest of the parts needed for a Yakima roof rack on your 2021 Ford F-350 Crew Cab are the following: - Yakima CoreBar Crossbars # Y00423 - BaseLine Towers for Yakima Crossbars # Y28TR - BaseClip Fit Kit # Y06185 I do recommend considering locks...
view full answer... - Roof Rack Recommendation for Raised Rails on a 2011 BMW 3 SeriesI have a way for you to use longer crossbars for a roof rack on your 2011 BMW 3 Series but since the Thule crossbars have a limiting slot on the underside we need to use a different brand roof rack system and for that I recommend Yakima as they're the only ones with a slot all the way through so you can literally fit any crossbar length. I'm only seeing from all of our manufacturers that a 2011 BMW 3 Series has raised rails so for that Yakima recommends the following parts (if you have...
view full answer... - Parts Needed to Install Roundbar Yakima Roof Rack on 2021 Ford F-250I have a way you can reuse your Yakima round crossbars on your 2021 Ford F-250 supercab but Yakima discontinued the q towers a while ago so there aren't any q clips around or ones made to fit your truck. What you'd need is the and BaseLine Towers # Y00146, fit kit part # Y06185 with the round bar adapter # Y03536 and you'd be set.
view full answer... - Budget Friendly Roof Rack, Kayak Carrying and Bike Carrying Options for 2017 Ram 2500The most budget friendly roof rack option we offer for your 2017 Ram 2500 would be the Vortex Aero rack from Rhino-Rack, which consists of: • 59 Inch Vortex Aero Crossbars, part # RRVA150B-2 • Roof Rack Feet, part # RRRLKVA • Vehicle Specific Fit Kit, part # DK043 The roof rack has a 165 lb weight capacity. For a kayak carrier, Malone offers an inexpensive option for 2 kayaks, part # MAL38FR. This carrier has a 75 lb per boat weight capacity and includes the straps to attach the kayaks...
view full answer... - Will Rhino-Rack Crossbars Fit On Yakima BaseLine Towers? The top channel on most crossbars like the Rhino-Rack and Yakima are similar but you should never mix and match towers and crossbars between different manufacturers. Their components are designed to work specifically with each other and your Yakima towers may not work properly with the Rhino-Rack crossbars. Instead you will want to stay with the Yakima crossbars from the list below to ensure they fit together properly and you have a manufacturer who will stand behind the warranty for the...
view full answer... - Best Roof Rack and Kayak Carrier for a 2019 Hyundai Tuscon w/ Bare RoofI would be happy to help you set your 2019 Hyundai Tucson up to transport your kayaks. You are going to need a roof rack but lets start with the kayak carrier. I recommend the Thule Compass Kayak and SUP Carrier w/ Tie-Downs - J-Style, Post Style, or Saddle - 2 Kayaks or SUPs item # TH890000. The Compass allows you to transport two kayaks on your roof rack crossbars. You will be able to carry in the stacker, J-style, or saddle position to maximize usable space on your crossbars. This carrier...
view full answer...
- Yakima LoadWarrior Roof Rack Cargo Basket for a 2022 Honda Accord Hybrid SportYes, the Yakima LoadWarrior Roof Rack Cargo Basket - Steel item # Y07070 would work great on your 2022 Honda Accord. It only weighs 25 lbs and will attach to the Yakima HD Crossbars item # Y01156. You will want to verify your Accord's capacity in your owners manual but the load warrior has a weight capacity of 140 lbs. It also has a wind fairing to reduce noise and is usable with all types of accessories. To secure your cargo basket to your roof rack you will want to use the Locking Brackets...
view full answer... - Recommended Roof Rack For 2017 GMC Terrain SLEWe do have a roof rack to fit your 2017 GMC Terrain with a naked roof. I suggest the Aerobars for better aerodynamics and less noise. For this system, I recommend the Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 # Y00425, the BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 # Y28TR, the RoundBar SL Adapter for Yakima BaseLine Towers - Qty 4 # Y03536, and the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 4 # Y06146. This will give you a complete...
view full answer... - Roof Rack and Kayak Carrier Recommendations for a 2015 Volkswagen Passat SE Sedan Naked RoofI personally like the Yakima roof rack systems over the Rhino-Rack roof racks because they are a higher quality, you don't have to cut the rubber strip in the top for T-Slot accessories, and Yakima has adjustments in the leg kits that help to fine-tune their fits. With that being said, if you like the look of the Rhino-Rack ROC25 Roof Rack # RR72MR a little more for your 2015 Volkswagen Passat SE then there is absolutely nothing wrong with going that route and you will be happy with the...
view full answer...
- Recommended Roof Rack for 2004 Honda Civic CoupeWe have several roof racks confirmed to fit your 2004 Honda Civic coupe, but there are no Rhino Rack roof racks among them. I have included a link to all the roof racks confirmed to fit your vehicle. You can then filter them by bar type, brand, color, etc. I recommend going with the Yakima Round Crossbars Roof Rack which includes the following parts: 48 inch CrossBars # Y00408 BaseLine Towers # Y28TR RoundBar SL Adapter # Y03536 Fit Kits # Y06162 and # Y06159 Check out the demonstration...
view full answer... - Can a Dual Hitch Receiver Be Used to Carry a Bike Rack and a Cargo CarrierDual hitch receivers, like the Roadmaster Dual Hitch Receiver Adapter, # RM-077-2, are designed for flat towing a vehicle behind an RV and having the ability to carry a bike rack or cargo carrier in the top receiver. A cargo carrier and bike rack cannot be used together. For your situation I recommend using a roof mounted bike rack like the Swagman Rooftop Bike Rack, # S64720, which is one of our most popular roof mounted bike racks. If you do not have a roof rack on your 2010 Ford Escape,...
view full answer... - Roof Rack and Kayak Carrier Recommendations for a 2013 Acura TLFor your 2013 Acura TL, I recommend the Yakima CoreBar Roof Rack System. The bars themselves are part # Y00421. They are heavy-duty (made from steel) and quiet (aero-style). They'll be able to handle the weight of kayak with no problem. I've linked to a video review of these bars for you to look at. The other parts needed for this system are: BaseLine Towers - part # Y28TR Two BaseClip Fit Kits - part # Y06162 and part # Y06181 For the kayak carrier, I recommend the Malone FoldAway-5,...
view full answer... - Will 4-Bike Thule Apex Bike Rack Fit a Class I Trailer Hitch on a 2017 Toyota Prius PrimeThe Thule Apex # TH9025XT fits a Class I hitch but even though it can hold 4 bikes you are still limited to 2 bikes. This is a limitation of Class I trailer hitches. In order to carry 4 bikes you would need a combination of a trailer hitch mount rack and a roof rack set up. For a hitch mounted bike rack to offset some cost for a roof rack I recommend the 2 bike Apex # TH9024XT. It weighs just 33 pounds so it is easy to handle and won't put a lot of stress on the trailer hitch. For a roof...
view full answer... - Can a Roof Rack be Installed on a 2015 Hyundai Tucson with a Panoramic Sun RoofIt depends on which system you're referring to. It basically comes down to how the roof rack installs and what the manufacturer of the roof rack's recommendations are. For example, the Thule roof rack that that fits the 2015 Hyundai Tucson is not recommended to be installed on the vehicle at all if it has a panoramic sunroof. However, the Yakima that's for the Tucson that has a naked roof consisting of the Round CrossBars # Y00408, BaseLine Towers # Y28TR, Adapters # Y03536, and BaseClips...
view full answer... - Parts Needed to Complete Yakima Roof Rack on a 2008 Toyota TacomaSince it looks like you have a Q-towerYakima crossbar setup you would only need the correct fit kit so that it could install on your 2008 Toyota but the clips for those towers are no longer available. Instead you will use the following: BaseLine Towers # Y28TR RoundBar SL Adapter # Y03536 BaseClip Fit Kit # Y06125 and # Y06128 Hopefully the crossbar is at least 58 inches long. Otherwise you would need the part # Y00409 as well.
view full answer...
- Recommended Roof Rack and Kayak Carrier for Two Kayaks on 2019 Subaru LegacyWhile we do have a roof rack and kayak carrier that will work for both of your Perception Tribe 11.5 kayaks the Malone SaddleUp Pro Truck Bed Kayak Carrier # MPG1001 is only designed for a single kayak and also would not fit a Malone Versa roof rack. For a roof rack I highly recommend the Yakima CoreBar system because it offers a combination of superior functionality, durability and looks. This roof rack is a fit for your 2019 Subaru Legacy so long as it is the Sedan model and is made...
view full answer... - Roof Rack Recommendation for 2020 Toyota PriusWhile we don't have any options for custom fit permanent install roof racks that fit your 2020 Toyota Prius we do have great options that install without modifying the vehicle at all that can be left on as long as you'd like. For that I highly recommend the Yakima JetStream roof rack part numbers # Y00425, # Y28TR, # Y06123, and # Y06169 as this installs easily and has the most aerodynamic bar design and also
view full answer... - 2016 Ford EDGE Titanium Panoramic Sunroof Roof Rack RecommendationWe checked with Yakima and their Jetstream roof rack part numbers # Y00425, # Y28TR, # Y06102, and # Y06139 is a confirmed fit for your 2016 Ford Edge with the panoramic roof. This would be a great option that would fit perfectly so we highly recommend it.
view full answer...
- Roof Rack Ladder Rack For A 2021 Chevrolet Silverado 1500 Short Bed Crew CabA roof rack for your 2021 Chevrolet Silverado 1500, crew cab, short bed I recommend the following: Rhino-Rack Vortex Aero Crossbar - # RRVA150B Rhino-Rack 2500 Series Legs - # RRRLKVAH Rhino-Rack T-Load Hitch Mounted Load Assist - # RTL002 Custom DK Fit Kit - # DK427H With this set up, you have the black cross bar, the feet for naked roofs which do not require drilling, the attachments for rails on a camper shell if needed, the T-load hitch mounted load assist with cross bar and has a...
view full answer... - What is Crossbar Spread of Yakima Roof Rack that Fits 2020 Honda CR-VWhen you install the Yakima Baseline roof rack part numbers # Y00421, # Y28TR, # Y06188, and # Y06189 on your 2020 Honda CR-V the spread will be 39-3/4 inches. You have to install the rack at the exact width and specs that Yakima requires.
view full answer... - Roof Rack Fit for 2013 Toyota Venza With Panoramic SunroofI checked with our rack manufacturers for you, and there is one roof rack option that will fit your 2013 Toyota Venza with the panoramic (or dual) sunroof, with the rack coming from Yakima; it is made up of the following parts: - Yakima JetStream Crossbars - Black # Y00426 - BaseLine Towers for Yakima Crossbars # Y28TR - BaseClip Fit Kit # Y06163 - BaseClip Fit Kit # Y06136 This is one of the best roof racks available, as the JetStream bars have what are called "WindRidges" built into...
view full answer... - Roof Rack Recommendation for a 2005 Scion xB and Extended Yakima LoadWarrior Cargo BasketSince you are interested in the Yakima LoadWarrior Cargo Basket with Extension, # Y07070-74, the roof rack that I recommend for your 2005 Scion xB is the Yakima BaseLine Tower Roof Rack which consists of the following parts. 58 Inch Round Crossbars # Y00409 BaseLine Towers # Y28TR RoundBar Adapter # Y03536 BaseClip Fit Kit # Y06163 The LoadWarrior cargo basket with the extension requires a roof rack with a crossbars spread between 30 inches and 50 inches. The BaseLine Tower roof rack...
view full answer... - Recommended Roof Rack For 2016 Ford Edge With Glass RoofWe do have a roof rack that will fit your 2016 Edge with the glass roof. I recommend the Yakima JetStream roof rack. This roof rack has Black aluminum aerodynamic crossbars that have WindRidges to help reduce wind noise and vibration. The weight capacity for this roof rack but you do not want to exceed the roof weight capacity of your vehicle roof. I have attached a photo that shows how the roof rack looks when installed on the roof of a Ford Edge. To order this roof rack you will need...
view full answer...
- Roof Rack for 2017 Ford Edge With Glass Panoramic RoofUnfortunately there are no mounts from Thule that are going to fit a 2017 Ford Edge with the glass panoramic roof. For a roof rack that will fit your Edge with that style of roof the best option is going to be from Yakima. The rack would be made up of: - Yakima CoreBar Crossbars # Y00421 - BaseLine Towers # Y28TR - BaseClip Fit Kit # Y06102 - BaseClip Fit Kit # Y06139 This rack uses aero crossbars which will give your '17 Edge a quiet ride with the bars attached. The bars are made...
view full answer... - Roof Rack for Roof Tent on a 2019 Ford F-450 Super Duty Crew CabWhile there are no roof racks that have a weight capacity of 400 lbs, I still believe we have a solution for your 2019 Ford F-450 Super Duty Crew Cab with the Yakima HD roof rack. This consists of the HD Crossbars # Y01157, BaseLine Towers # Y28TR, HD Bar SL Adapter # Y03541, and Fit Kit # Y06185. If you are looking to use a tent that has a 400 lb weight capacity like the Yakima SkyRise HD # Y07436 then you actually just need to make sure that the roof rack is rated for 165 lbs like the...
view full answer... - Correct Yakima Towers to Use with Existing Round Crossbars on 2019 Hyundai Kona with Bare RoofThe correct Yakima towers to use on the bare roof of your 2019 Hyundai Kona are indeed the BaseLine Towers # Y28TR that you referenced. These are the only Yakima towers that will work on your particular vehicle. To use these with your existing round bars you will just need to add the RoundBar SL Adapter # Y03536. This kit includes all 4 of the needed adapters for each of the towers. In addition to the towers themselves you will also need the Front Fit Kit # Y06175 and the Rear Fit Kit...
view full answer... - Is Fit Kit Available for Old Thule 400XT Feet on 2004 Honda PilotThule actually didn't start making the Thule Aero roof rack with feet # TH400XT until 2006. When I spoke with my contact at Thule she said that the discontinued fit kit 2163 is what was used for a 2006-2010 Honda Pilot. Since the first generation Honda Pilot was from 2003-2008 this kit may work for your application but Thule never test fit this and you'll probably have a really hard time finding this kit as the roof rack was discontinued back in about 2012. If you can't find that fit kit...
view full answer... - Largest Rhino-Rack Pioneer Platform For Crossbars on 2020 Ford RangerYep, the largest Rhino-Rack Pioneer for crossbars that will fit your 2020 Ford Ranger is indeed the 58" x 47" option: - Rhino-Rack Universal Pioneer Platform Rack for Crossbars # RR42115BF The Pioneer is a really nice system which allows you to carry a lot of gear in a number of different ways; to tie down that gear you can use the Ratchet Strap Kit # RR43175 and/or the Eye Bolt Kit # RR43178. If you also need a roof rack on your '20 Ranger for the Pioneer, go with the Yakima which consists...
view full answer... - Roof Racks for 2004 Honda Civic 2-Door Coupe for Transporting Surf BoardsWe can help you with a roof rack and surf board carriers for your 2004 Honda Civic 2-door coupe. Roof rack options for your Civic come from Yakima and SeaSucker and are displayed on the page I linked for you. Yakima offers both standard round bar racks and also their quieter Jetstream rack systems. The round bar rack is the lowest-cost setup and is made of parts # Y00408, # Y28TR, # Y03536, # Y06162 and # Y06159. But for only a few more dollars you can get the black Jetstream rack, which...
view full answer... - Roof Rack for Roof Tent on a 2019 Ford F-450 Super Duty Crew CabWhile there are no roof racks that have a weight capacity of 400 lbs, I still believe we have a solution for your 2019 Ford F-450 Super Duty Crew Cab with the Yakima HD roof rack. This consists of the HD Crossbars # Y01157, BaseLine Towers # Y28TR, HD Bar SL Adapter # Y03541, and Fit Kit # Y06185. If you are looking to use a tent that has a 400 lb weight capacity like the Yakima SkyRise HD # Y07436 then you actually just need to make sure that the roof rack is rated for 165 lbs like the...
view full answer... - Recommended Roof Rack and Kayak Carrier for a 2003 Toyota RAV4Lucky for you, Yakima does make a set of crossbars that are designed to work with vehicle's that have a bare roof like your RAV4. Check out the Yakima BaseLine FX Roof Rack for Naked Roofs # Y59UV with the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06185. These crossbars measure 44 3/4" long, has a 165 lb dynamic weight capacity, and has an integrated top channel for roof mounted accessories. Since you also are looking for a way to transport some kayaks, I'd recommend checking...
view full answer... - Recommended Yakima Roof Rack for a 2024 Ford F-250 Crew Cab To add a Yakima roof rack to your 2024 Ford F-250 Crew Cab you will need the following parts: Yakima JetStream Crossbars - Aluminum - Black - 60" Long - Qty 2 item # Y00426 BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 4 item # Y06185
view full answer... - Recommended Set Up for 2017 Ford F-250 to Haul 4 White Water Kayaks.I have a set up that will work great for your 2017 Ford F-250 to haul 4 white water kayaks. For a roof rack for your truck I recommend the following components: -Yakima HD Crossbars # Y01158 -BaseLine Towers for Yakima Crossbars # Y28TR -HD Bar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers # Y03541 -BaseClip Fit Kit for Yakima BaseLine Roof Rack # Y06185 To get your 4 kayaks strapped down safe and sound, I recommend the Rhino-Rack Nautic Stack Kayak Carrier...
view full answer... - Does Same Yakima CoreBar Roof Rack Fit 2017 and 2020 Ford F-350Yes the Yakima CoreBar Roof Rack part numbers # Y00422, # Y28TR, and # Y06185 is a confirmed fit for both a 2017 and a 2020 Ford F-350 crew cab.
view full answer... - Roof Rack for 2020 Ford F-350 Super Duty to Carry Bike RacksFor a roof rack for your 2020 Ford F-350 Super Duty that would allow you to carry a lot of bikes you'd want to go with a rack that has a longer crossbar like our Yakima Jetstream Rack # Y00426, # Y28TR, and # Y06185 which is 60 inches long. Then you could use a roof bike rack like the Yakima HighRoad part # Y02114 which allows you to keep the front wheel installed on the bike. Space-wise you wouldn't be limited on how many bikes you could carry as most likely you'd run out of roof capacity...
view full answer... - Can 70 Inch Yakima JetStream Crossbars be Cut on 2021 Ford F-350 Crew CabWe have a similar option for you, but you do not want to cut or trim down the Yakima JetStream Crossbars # Y00427. Instead, there are different Yakima bars that are designed to be cut down if needed, called CoreBars. The 70 inch CoreBars, and rest of the parts needed for a Yakima roof rack on your 2021 Ford F-350 Crew Cab are the following: - Yakima CoreBar Crossbars # Y00423 - BaseLine Towers for Yakima Crossbars # Y28TR - BaseClip Fit Kit # Y06185 I do recommend considering locks...
view full answer... - Parts Needed to Install Roundbar Yakima Roof Rack on 2021 Ford F-250I have a way you can reuse your Yakima round crossbars on your 2021 Ford F-250 supercab but Yakima discontinued the q towers a while ago so there aren't any q clips around or ones made to fit your truck. What you'd need is the and BaseLine Towers # Y00146, fit kit part # Y06185 with the round bar adapter # Y03536 and you'd be set.
view full answer... - How To Transfer Crossbars From a 2019 Ford F-350 to a Leer 100RC TopperThe track systems are all pretty much universal so you can use Yakima accessories in Thule tracks or vice versa. In regards to weight, you will be limited to 165 lbs per set of crossbars no matter which system you choose as that is all the mounting feet can handle, even with the Yakima HD Crossbars System. The vehicle's roof would likely not be able to handle much more than this either. However, you can carry up to 330 lbs total but you would need to distribute the weight so that 165 lbs...
view full answer... - Roof Rack Recommendatio nfor 2018 Ford F-250 Crew Cab that is LeasedFor your 2018 Ford F-250 Crew Cab the Yakima Roof Rack part numbers # Y00422, # Y28TR, and # Y06185 would be a great solution as it is a confirmed fit and the fact that it does not permanently modify the roof of the vehicle it is installed on. So you'd be able to take the roof off when it's time to return the lease and no one would know the difference. The aero shape of these bars also helps cut down on wind noise which is a nice feature as well. I attached an install video for thist...
view full answer...
- Recommended Roof Rack and Bike Rack for 2019 Ford F-350 Crew CabWe have everything you need to secure your bikes on the roof of your 2019 Ford F-350 Crew Cab. Starting with the roof rack I recommend the Yakima JetStream System. This consists of Black # Y00426 aluminum JetStream Crossbars, the BaseLine Towers # Y28TR, and the BaseClip Fit Kit # Y06185. This will provide you with a really sleek, aerodynamic system for a quiet ride and better fuel efficiency when compared to round or square bar racks. I have attached a short video demonstration that...
view full answer... - Can Two Thule Hullavator Kayak Carriers Be Used On A Thule TracRac SR Ladder Rack Yes, you can use two of the Thule Hullavator Pro Kayak Roof Rack and Lift Assist # TH898 on the Thule TracRac SR. It has plenty of capacity and space for both to fit, you'll just need to place the towers so that the crossbars are spaced 24" apart. For your 2022 Ford F-250 with a 6-3/4' bed you'll need part # TH43003XT-785 for the TracRac. The Thule Hullavator requires that the roof of the vehicle can hold at least 130lbs, but you'll be splitting this with the ladder rack. I'd just check...
view full answer... - Parts Needed To Install Single Roof Rack Crossbar With Aero Fairing On a 2019 Ford F-250 As long as you have a crew cab or super cab the following parts will allow you to mount a AirScreen XT # TH22WV on the roof of your 2019 Ford F-250. Yakima JetStream Crossbar # 8880650 Qty 1 BaseLine Tower # 8880618 Qty 2 Fit Kit # Y06185 Qty 1
view full answer... - Adding A Roof Rack To A 2020 Ford F-350 Crew Cab For Additional Cargo Carrying CapacityYakima OverHaul HD Adjustable Truck Bed Ladder Rack - Aluminum - 500lbs - 68" Crossbars # Y01151-58 has an on-road capacity of 500lbs, off-road capacity of 300lbs, and static capacity of 800lbs. The correct roof rack for your 2020 Ford F-350 Super Duty Roof Rack by Yakima would be the following parts: Yakima HD Crossbars - Aluminum - Black - 60" Long - Qty 2 # Y01157. BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 # Y28TR. HD Bar SL Adapter for Yakima BaseLine, SkyLine, TimberLine,...
view full answer... - Parts Needed to Install Yakima JetStream Crossbars on 2021 Ford F-250To install 60 inch Yakima JetStream # Y00427 aero-style crossbars on your Ford F-250, you'll need the # Y28TR BaseLine towers and the # Y06185 vehicle-specific fit kit.
view full answer... - Can I Purchase a Half System of the 66 Yakima Round Crossbars?Yes, we do carry a option for a single Yakima Round Crossbar - 66" # Y8810025 for your 2020 Ford F-250 Super Duty (Super Cab). In addition to the crossbar, you will need two of the Replacement BaseLine Tower for Yakima Crossbars # 8880618, the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 # Y06185, and two of the Replacement RoundBar SL Adapter for Yakima StreamLine Towers - Qty 1 # 8880641. With that being said, in order to transport a kayak or a canoe on the top of your...
view full answer... - Half Roof Rack and Ladder Rack that Fits 2023 Ford F-350To do a half roof rack for the roof of your 2023 Ford F-350 you'd need the following: Yakima JetStream Crossbar part # 8880650 BaseLine Towers for Yakima Crossbars part # Y62TR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers part # Y06185 There isn't a way to do a half ladder rack so best option would be an adjustable height rack like the Yakima Overhaul # Y01151-5855 so that you can have it match the height of your roof rack and if needed you could leave off the rear (or front)...
view full answer... - Recommended Roof Rack for a 2018 Ford F-350 Super Duty With a Naked RoofFor your 2018 Ford F-350 super duty with a naked roof, I recommend going with the Yakima BaseLine FX Roof Rack for Naked Roofs - JetStream Aero Crossbars # Y56UV with the fit kit # Y06185. This roof rack system will work great with your naked roof, has a maximum weight capacity of 165-lbs, and has integrated t-slots so you can use roof mounted accessories as well.
view full answer... - Is It Possible To Add One Crossbar To The Roof Of A 2019 Ford F-350 Super DutyAbsolutely! As long as your 2019 Ford F-350 Super Duty is a Crew Cab or Super Cab you can use the following parts to add just one crossbar to your truck: 60" Yakima JetStream Crossbar # 8880649 2 of the Replacement BaseLine Tower for Yakima Crossbars # 8880618 BaseClip Fit Kit # Y06185 I also recommend adding the Yakima Same Key System (SKS) Lock Cores # Y07202 which will lock the roof rack to your roof to deter theft. At this time there is not a roof rack system to fit the regular...
view full answer... - What Roof Rack do You Recommend for a 2017 Lexus LS 460?I have an answer about your Rhino-Rack crossbar system. Unfortunately, I confirmed that Rhino-Rack does not make a crossbar system that is compatible to fit your 2017 Lexus LS 460. Since they do not have any roof racks for your vehicle, they do not manufacture compatible fit kits for the crossbars. Fit kits from other manufacturers do not work with Rhino-Rack crossbars because each company produces specific fitments for their feet/towers. Here at etrailer, we have never seen anyone custom...
view full answer... - Solution for Carrying Multiple Bikes on Roof of 2021 Ford F250We absolutely have roof rack options for your 2021 Ford F250. Beginning with the roof rack, I'd recommend the Yakima CoreBar roof rack which would be assembled using these parts: • Yakima 70 inch CoreBar crossbars, part # Y00423 • Yakima BaseLine Towers, part # Y28TR • Yakima Vehicle-Specific fit kit, part # Y06185 With a 70 inch long crossbar, you'll be able to fit up to 5 bikes on the roof, but keep in mind that the roof rack has a 165 lb weight capacity, so unless your bikes are really...
view full answer... - Is There a Solution for a Roof Rack on My 2021 Ford F-250 that Doesnt Require Drilling?I have a great no-drilling solution for you. While the Rhino-Rack Heavy-Duty Bar Roof Rack for Camper Shells - Track Mount - Black - 59" Long # Y01-130B requires drilling, there are options for your 2021 Ford F-250 Super Duty crew cab that do not require any drilling. To go this route, you will need the following parts: - Round 66" CrossBars for Yakima Roof Rack System (QTY 2) # Y00410 - BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 # Y28TR - RoundBar SL Adapter for Yakima...
view full answer... - Are Yakima Jetstream Roof Rack Instructions for 2023 Ford F-350 Same as 2024 ModelsThe Yakima JetStream roof rack part numbers # Y00426, # Y28TR, # Y06185 that fits the 2024 Ford F-350 crew cab is the same as the 2023 models so the instructions are the exact same. So Jack, what that means is that the instructions were printed when the 23' model was the newest but it's definitely the same as the 24' models.
view full answer... - Can I Reuse Yakima Q Towers for 2021 Ford F-250In 2016, Yakima phased out their Q-Towers and upgraded to their new BaseLine system. That means for vehicles that are model year 2016 or newer, there are no confirmed Q-clip fits for them so we need to get you a new roof rack for your 2021 Ford F-250. If you want to reuse your round bars to make a roof rack on your F-250 Crew Cab, you can do so with a new BaseLine system. That consists of BaseLine Towers # Y28TR, a RoundBar Adapter # Y03536, and BaseClip Fit Kit # Y06185.
view full answer... - Roof Rack for Roof Tent on a 2019 Ford F-450 Super Duty Crew CabWhile there are no roof racks that have a weight capacity of 400 lbs, I still believe we have a solution for your 2019 Ford F-450 Super Duty Crew Cab with the Yakima HD roof rack. This consists of the HD Crossbars # Y01157, BaseLine Towers # Y28TR, HD Bar SL Adapter # Y03541, and Fit Kit # Y06185. If you are looking to use a tent that has a 400 lb weight capacity like the Yakima SkyRise HD # Y07436 then you actually just need to make sure that the roof rack is rated for 165 lbs like the...
view full answer... - Recommended Roof Rack and Kayak Carrier for a 2003 Toyota RAV4Lucky for you, Yakima does make a set of crossbars that are designed to work with vehicle's that have a bare roof like your RAV4. Check out the Yakima BaseLine FX Roof Rack for Naked Roofs # Y59UV with the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06185. These crossbars measure 44 3/4" long, has a 165 lb dynamic weight capacity, and has an integrated top channel for roof mounted accessories. Since you also are looking for a way to transport some kayaks, I'd recommend checking...
view full answer... - Recommended Yakima Roof Rack for a 2024 Ford F-250 Crew Cab To add a Yakima roof rack to your 2024 Ford F-250 Crew Cab you will need the following parts: Yakima JetStream Crossbars - Aluminum - Black - 60" Long - Qty 2 item # Y00426 BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 4 item # Y06185
view full answer... - Recommended Set Up for 2017 Ford F-250 to Haul 4 White Water Kayaks.I have a set up that will work great for your 2017 Ford F-250 to haul 4 white water kayaks. For a roof rack for your truck I recommend the following components: -Yakima HD Crossbars # Y01158 -BaseLine Towers for Yakima Crossbars # Y28TR -HD Bar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers # Y03541 -BaseClip Fit Kit for Yakima BaseLine Roof Rack # Y06185 To get your 4 kayaks strapped down safe and sound, I recommend the Rhino-Rack Nautic Stack Kayak Carrier...
view full answer... - Does Same Yakima CoreBar Roof Rack Fit 2017 and 2020 Ford F-350Yes the Yakima CoreBar Roof Rack part numbers # Y00422, # Y28TR, and # Y06185 is a confirmed fit for both a 2017 and a 2020 Ford F-350 crew cab.
view full answer... - Roof Rack for 2020 Ford F-350 Super Duty to Carry Bike RacksFor a roof rack for your 2020 Ford F-350 Super Duty that would allow you to carry a lot of bikes you'd want to go with a rack that has a longer crossbar like our Yakima Jetstream Rack # Y00426, # Y28TR, and # Y06185 which is 60 inches long. Then you could use a roof bike rack like the Yakima HighRoad part # Y02114 which allows you to keep the front wheel installed on the bike. Space-wise you wouldn't be limited on how many bikes you could carry as most likely you'd run out of roof capacity...
view full answer... - Can 70 Inch Yakima JetStream Crossbars be Cut on 2021 Ford F-350 Crew CabWe have a similar option for you, but you do not want to cut or trim down the Yakima JetStream Crossbars # Y00427. Instead, there are different Yakima bars that are designed to be cut down if needed, called CoreBars. The 70 inch CoreBars, and rest of the parts needed for a Yakima roof rack on your 2021 Ford F-350 Crew Cab are the following: - Yakima CoreBar Crossbars # Y00423 - BaseLine Towers for Yakima Crossbars # Y28TR - BaseClip Fit Kit # Y06185 I do recommend considering locks...
view full answer... - Parts Needed to Install Roundbar Yakima Roof Rack on 2021 Ford F-250I have a way you can reuse your Yakima round crossbars on your 2021 Ford F-250 supercab but Yakima discontinued the q towers a while ago so there aren't any q clips around or ones made to fit your truck. What you'd need is the and BaseLine Towers # Y00146, fit kit part # Y06185 with the round bar adapter # Y03536 and you'd be set.
view full answer... - How To Transfer Crossbars From a 2019 Ford F-350 to a Leer 100RC TopperThe track systems are all pretty much universal so you can use Yakima accessories in Thule tracks or vice versa. In regards to weight, you will be limited to 165 lbs per set of crossbars no matter which system you choose as that is all the mounting feet can handle, even with the Yakima HD Crossbars System. The vehicle's roof would likely not be able to handle much more than this either. However, you can carry up to 330 lbs total but you would need to distribute the weight so that 165 lbs...
view full answer... - Roof Rack Recommendatio nfor 2018 Ford F-250 Crew Cab that is LeasedFor your 2018 Ford F-250 Crew Cab the Yakima Roof Rack part numbers # Y00422, # Y28TR, and # Y06185 would be a great solution as it is a confirmed fit and the fact that it does not permanently modify the roof of the vehicle it is installed on. So you'd be able to take the roof off when it's time to return the lease and no one would know the difference. The aero shape of these bars also helps cut down on wind noise which is a nice feature as well. I attached an install video for thist...
view full answer... - Recommended Roof Rack and Bike Rack for 2019 Ford F-350 Crew CabWe have everything you need to secure your bikes on the roof of your 2019 Ford F-350 Crew Cab. Starting with the roof rack I recommend the Yakima JetStream System. This consists of Black # Y00426 aluminum JetStream Crossbars, the BaseLine Towers # Y28TR, and the BaseClip Fit Kit # Y06185. This will provide you with a really sleek, aerodynamic system for a quiet ride and better fuel efficiency when compared to round or square bar racks. I have attached a short video demonstration that...
view full answer... - Can Two Thule Hullavator Kayak Carriers Be Used On A Thule TracRac SR Ladder Rack Yes, you can use two of the Thule Hullavator Pro Kayak Roof Rack and Lift Assist # TH898 on the Thule TracRac SR. It has plenty of capacity and space for both to fit, you'll just need to place the towers so that the crossbars are spaced 24" apart. For your 2022 Ford F-250 with a 6-3/4' bed you'll need part # TH43003XT-785 for the TracRac. The Thule Hullavator requires that the roof of the vehicle can hold at least 130lbs, but you'll be splitting this with the ladder rack. I'd just check...
view full answer... - Parts Needed To Install Single Roof Rack Crossbar With Aero Fairing On a 2019 Ford F-250 As long as you have a crew cab or super cab the following parts will allow you to mount a AirScreen XT # TH22WV on the roof of your 2019 Ford F-250. Yakima JetStream Crossbar # 8880650 Qty 1 BaseLine Tower # 8880618 Qty 2 Fit Kit # Y06185 Qty 1
view full answer... - Adding A Roof Rack To A 2020 Ford F-350 Crew Cab For Additional Cargo Carrying CapacityYakima OverHaul HD Adjustable Truck Bed Ladder Rack - Aluminum - 500lbs - 68" Crossbars # Y01151-58 has an on-road capacity of 500lbs, off-road capacity of 300lbs, and static capacity of 800lbs. The correct roof rack for your 2020 Ford F-350 Super Duty Roof Rack by Yakima would be the following parts: Yakima HD Crossbars - Aluminum - Black - 60" Long - Qty 2 # Y01157. BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 # Y28TR. HD Bar SL Adapter for Yakima BaseLine, SkyLine, TimberLine,...
view full answer... - Parts Needed to Install Yakima JetStream Crossbars on 2021 Ford F-250To install 60 inch Yakima JetStream # Y00427 aero-style crossbars on your Ford F-250, you'll need the # Y28TR BaseLine towers and the # Y06185 vehicle-specific fit kit.
view full answer... - Can I Purchase a Half System of the 66 Yakima Round Crossbars?Yes, we do carry a option for a single Yakima Round Crossbar - 66" # Y8810025 for your 2020 Ford F-250 Super Duty (Super Cab). In addition to the crossbar, you will need two of the Replacement BaseLine Tower for Yakima Crossbars # 8880618, the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 # Y06185, and two of the Replacement RoundBar SL Adapter for Yakima StreamLine Towers - Qty 1 # 8880641. With that being said, in order to transport a kayak or a canoe on the top of your...
view full answer... - Half Roof Rack and Ladder Rack that Fits 2023 Ford F-350To do a half roof rack for the roof of your 2023 Ford F-350 you'd need the following: Yakima JetStream Crossbar part # 8880650 BaseLine Towers for Yakima Crossbars part # Y62TR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers part # Y06185 There isn't a way to do a half ladder rack so best option would be an adjustable height rack like the Yakima Overhaul # Y01151-5855 so that you can have it match the height of your roof rack and if needed you could leave off the rear (or front)...
view full answer... - Recommended Roof Rack for a 2018 Ford F-350 Super Duty With a Naked RoofFor your 2018 Ford F-350 super duty with a naked roof, I recommend going with the Yakima BaseLine FX Roof Rack for Naked Roofs - JetStream Aero Crossbars # Y56UV with the fit kit # Y06185. This roof rack system will work great with your naked roof, has a maximum weight capacity of 165-lbs, and has integrated t-slots so you can use roof mounted accessories as well.
view full answer... - Is It Possible To Add One Crossbar To The Roof Of A 2019 Ford F-350 Super DutyAbsolutely! As long as your 2019 Ford F-350 Super Duty is a Crew Cab or Super Cab you can use the following parts to add just one crossbar to your truck: 60" Yakima JetStream Crossbar # 8880649 2 of the Replacement BaseLine Tower for Yakima Crossbars # 8880618 BaseClip Fit Kit # Y06185 I also recommend adding the Yakima Same Key System (SKS) Lock Cores # Y07202 which will lock the roof rack to your roof to deter theft. At this time there is not a roof rack system to fit the regular...
view full answer... - What Roof Rack do You Recommend for a 2017 Lexus LS 460?I have an answer about your Rhino-Rack crossbar system. Unfortunately, I confirmed that Rhino-Rack does not make a crossbar system that is compatible to fit your 2017 Lexus LS 460. Since they do not have any roof racks for your vehicle, they do not manufacture compatible fit kits for the crossbars. Fit kits from other manufacturers do not work with Rhino-Rack crossbars because each company produces specific fitments for their feet/towers. Here at etrailer, we have never seen anyone custom...
view full answer... - Solution for Carrying Multiple Bikes on Roof of 2021 Ford F250We absolutely have roof rack options for your 2021 Ford F250. Beginning with the roof rack, I'd recommend the Yakima CoreBar roof rack which would be assembled using these parts: • Yakima 70 inch CoreBar crossbars, part # Y00423 • Yakima BaseLine Towers, part # Y28TR • Yakima Vehicle-Specific fit kit, part # Y06185 With a 70 inch long crossbar, you'll be able to fit up to 5 bikes on the roof, but keep in mind that the roof rack has a 165 lb weight capacity, so unless your bikes are really...
view full answer... - Is There a Solution for a Roof Rack on My 2021 Ford F-250 that Doesnt Require Drilling?I have a great no-drilling solution for you. While the Rhino-Rack Heavy-Duty Bar Roof Rack for Camper Shells - Track Mount - Black - 59" Long # Y01-130B requires drilling, there are options for your 2021 Ford F-250 Super Duty crew cab that do not require any drilling. To go this route, you will need the following parts: - Round 66" CrossBars for Yakima Roof Rack System (QTY 2) # Y00410 - BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 # Y28TR - RoundBar SL Adapter for Yakima...
view full answer... - Are Yakima Jetstream Roof Rack Instructions for 2023 Ford F-350 Same as 2024 ModelsThe Yakima JetStream roof rack part numbers # Y00426, # Y28TR, # Y06185 that fits the 2024 Ford F-350 crew cab is the same as the 2023 models so the instructions are the exact same. So Jack, what that means is that the instructions were printed when the 23' model was the newest but it's definitely the same as the 24' models.
view full answer... - Can I Reuse Yakima Q Towers for 2021 Ford F-250In 2016, Yakima phased out their Q-Towers and upgraded to their new BaseLine system. That means for vehicles that are model year 2016 or newer, there are no confirmed Q-clip fits for them so we need to get you a new roof rack for your 2021 Ford F-250. If you want to reuse your round bars to make a roof rack on your F-250 Crew Cab, you can do so with a new BaseLine system. That consists of BaseLine Towers # Y28TR, a RoundBar Adapter # Y03536, and BaseClip Fit Kit # Y06185.
view full answer...
Do you have a question about this Roof Rack?
Info for this part was:
Edited by:
Daron K
Written by:
Alex H
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.