To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Low-profile, aerodynamic crossbars create an aftermarket roof rack for your vehicle. Aluminum bars have T-slots that let you mount channel-mounted carriers and accessories. Flexible rubber strips in T-slots keep out dirt and won't need trimming.
Features:
Inno Aero Aluminum Load Bars - 42" Long - Black - Qty 2:Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today in our 2017 Ford Escape, we're taking a look at the INNO Aero crossbar kit. The part number for our crossbars today are INXB1155-2. For our foot pack, we're using INXS200, and for our fit kit for our Escape, we're using INK628. Now, we already have our front bar installed. We're going to show you how to put the last foot pack together, and then how we install this onto our vehicle, since it's going to be the same way. To start off, we're going to take our foot, we're going to remove this bolt here. You may need to use the included tool to loosen that up.
With this bolt removed, we'll take that clamp from our fit kit. Everything that you see on this table is included with the kit. The only thing you'll need to provide, is a flat tape measure or a tape measure of some sort just to measure out where we're going to place our crossbar on our roof. We'll take that clamp. We're just going to set it loosely over top and tighten that bolt down just enough so that it holds our clamp into place.
We'll put this over and we're going to take the rubber bottom from our fit kit and we're just going to place it onto our foot pack. We'll set that off to the side. Next, we'll take our metal bracket that comes with our foot pack. We're going to slide this insert all the way out and place this bracket inside and slide it all the way down until it's in this opening here. Then we can take our foot pack and pull that all the way out. Now, we'll take the larger of the two Allen keys and we're just going to tighten down this bolt on the inside of this section here, and that's going to hold our foot pack in place.
With that tightened down, we can open up our doors, and we're ready to load up our crossbar. Now, one thing to keep in mind when we're loading up our crossbar, you'll notice that the front bar, we had the thicker side of the bar facing towards the front. That's going to give that aerodynamic shape and help to reduce that wind noise and drag. I'm just going to reach it across, set it down, and I want to make sure that my clamp is hooked around our door. Now we'll take our tape measure and we're going to measure from the inside edge of our door jamb here to the middle of our clamp. That's going to be 57 centimeters. Now we'll do the same thing to the other side.
We just want to make sure that these are sitting evenly so that when we put any accessories on our roof, they're going to sit even as well. Now we can grab our included torque tool and start to tighten that down. I like to start by holding my clamp up against the door jamb and tighten that down. I'll do the same thing once again to the other side, and you'll notice we did things one side to the other, doing it evenly so that we don't have our crossbar pulling unevenly to one side. Once you hear that clicking noise, you know that it's completely tight and it's torqued down to our specifications. We just want to make sure that the other side is torqued as well. Now we can close up both our doors, and we'll take our locking end caps and install those. With these locked on, any channel-mounted accessories that you have are easily locked into place, so you don't have to worry about theft and tampering with those. You fit kits are also attached. You won't have to worry about anyone trying to loosen those up either. Just keep in mind when you load up your accessories, that this has a 165-pound weight capacity, but you do want to check your vehicle's owner's manual before loading up that much weight. Now that we have everything secured down, that's going to be our completed look at the INNO Aero crossbars and how they fit on our 2017 Ford Escape.
Average Customer Rating: 4.8 out of 5 stars (81 Customer Reviews)
Low-profile, aerodynamic crossbars create an aftermarket roof rack for your vehicle. Aluminum bars have T-slots that let you mount channel-mounted carriers and accessories. Flexible rubber strips in T-slots keep out dirt and won't need trimming.Prefect fit and looks great on my 2008 Evo X. The install videos made it super easy to put together and install.
This inno rack fits well with my car. I installed a cargo box with it. The roof rack is well built and sturdy.
Shipping and packaging was very good and delivered on time!
Glad I went with the Aero cross bars for the less wind noise!
Perfect fit on our vehicle and they feel strong and sturdy. Install wasn’t bad either. Very happy with the kit at this point and will test them out this weekend.
Great profile. Looks good on truck.
Locking and unlocking very easy.
I bought these last summer to affix my kayaks to the roof of my corola. my husband, who is decidedly not a handy person, installed them in an hour and they've been great. no issues– slight whistling at times on the interstate, but that's to be expected. highly recommend!
2016 Golf R MK7
Love it so far
By far the best service I have received in a very long time. I recieved my inno flush feet areo crossbars, sooner than expected and the assembly was just as specified. I especially liked having the video with the tutorial.
I like the look of the low profile and the quality is outstanding. I have used this for my kayak and the low profile helps with the loading and unloading.
I would highly recommend this product and Company.
Thank you etrailer my car looks great I spent 4 hours to ensemble this cross bar and the bask rack but finally I made it now I have more cargo space in my car I really recommend etrailer good quality items and good service thanks again
I like that the bars don't extend too much beyond the width of the vehicle (2012 Toyota Prius V). No noticeable wind noise or fuel economy change. They held two bikes just fine.
I bought this for my 2016 Fiat 500X which has two glass sunroofs, and it fits perfectly! Follow the directions, put the bars where it says to, and your glass will be safe. You can't open the sunroof while this is in place, but hey, at least you can haul gear on your roof without breaking the glass.
The roof rack arrived days before it was scheduled to. Everything ordered arrived intact. Assembly and installation were pretty easy per the directions included and the video on the etrailer site. The rack looks fine on my Maxda CX5 and the additional noise from the rack is not too bad. Haven't had my cargo box on the rack yet but anticipate no problems with it. My experience with etrailer has been first rate.
Josh is the greatest! Thanks for all the help!
Nice aerodynamic bars.
Everything about this kit met my expectations.
- Perfect fit for my Ford Edge, as advertised.
- Lowest bar height that was still high enough for the Edge Vista roof to clear. The glass does clear when nothing is attached to the bars.
- Aero bar shape. I haven't done a lot of miles yet with only the bars and no other attachments.
I attached an Inno roof box (which still fits through my garage door!) and did a 2000 mile road trip at insterstate speeds. Except the box noise (expected), and a bit of a mileage hit, I had no issues. Secure fit the whole way.
I bought the whole kit for 2008 honda fit for a cross-country trip, and it performed great. Made it with two surfboards on top with no problems. Instructions for installation are atrocious, but youtube videos can fill in the gaps. Shipping was quick. I didn't use any of the customer service options, but it seems like they would be useful if needed.
I like that the feet don't extend too much beyond the width of the vehicle (2012 Toyota Prius V). No noticeable wind noise or fuel economy change. They held two bikes just fine. The tightening process feels very secure, but took me a while to do. I wasn't in a hurry so it was fine.
Great customer service, thank you for all your help!
The Inno racks have handled an assortment of different loads without problems. They are quiet at highway speeds. The lack of tie down points are the only drawback with these racks.
fast shipping, great customer service, and easy to install
Good racks, one year of frequent use and no problems. The instructions could have been clearer, but once I figured it out it was easy to install.
Easy and worked well with the total kit for our vehicle. Feel sturdy and strong. We’re happy with them.
Shipping and packaging was very good and delivered on time!
Love the flush bar look!
Great product and figment, the service was great as well, the only suggestion I have is if there is a product that cannot be shipped to Canada it should be told when you try to order it, however the follow up call was appreciated .
Easy install, build quality is really nice as is fit and finish. Almost no wind noise at highway speed.
Do you have a question about this Roof Rack?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.