To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Low-profile, aerodynamic crossbars create an aftermarket roof rack for your vehicle. Aluminum bars have T-slots that let you mount channel-mounted carriers and accessories. Flexible rubber strips in T-slots keep out dirt and won't need trimming.
Features:
Inno Aero Aluminum Load Bars - 45" Long - Black - Qty 2:Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi everyone, it's Evangeline here at etrailer. And today, we'll be taking a look at our Inno roof rack system with the Inno flush feet, as well as the custom fit kit for your 2020 Ford Edge. So you have your Ford Edge and maybe you wanna take it out for adventures or you just wanna carry more things that you usually can't. What kind of things are those Well, if you wanna carry your bike racks, if you want roof boxes or roof baskets, or if you wanna carry kayaks even, what you need first is a roof rack on your Ford Edge. So this is the Inno flush feet roof rack. It sits a bit more low profile.
You get less overhang, but you also get a more streamlined look compared to other roof racks. So we're gonna take a look at this system as well as its different dimensions, just to see if it's the right fit for you, whatever you wanna carry, and your Ford Edge. So as you can see here, we have a panoramic glass roof. And if we open the roof, you can see how we still have clearance underneath our crossbars. But let's take some measurements.
So with our glass roof up, you can see that we have a clearance of about half an inch between the roof and the bottom of our crossbars. So if you have any accessories mounted to your crossbars, I highly recommend getting the ones that mount to your T tracks because only then will you be able to keep them on while you open your roof. So we have the Inno aero crossbars in our system right now. So these are like the more modern design of crossbars compared to the square or round crossbars that are the traditional design. This is a little bit more aerodynamic, which will help with decreasing wind drag and wind noise.
So that as you drive down the highway, you don't hear your roof rack as much, especially if there's nothing on it. So these are the 49-inch long crossbars, but for actual usable bar space on your Ford Edge, on the top, we have 43 inches, and inside the towers, so if you use clamps that go around, you have about 40 inches of usable bar space. Something worth considering if you wanna carry a lot more things or larger things and you want more bar space, I highly recommend taking a look at the Inno through feet instead, but because this is low profile, you get that nice sleek look, but less bar space. We have this really nice black finish on our aluminum crossbars. What's also cool about this is how we have a T track system.
So if you're using T track-mounted accessories, you just slide them into your crossbars and you push down on this. So that way, you don't have to cut up your rubber strips in here, you just keep them there and they adjust to your accessory. So let's talk about roof clearances. So this sits pretty close to your roof. The exact measurement with the glass roof down is gonna be about 1 7/8 inches of clearance from the top of your roof to the bottom of your crossbars. So if you have accessories that clamp around your crossbars, you'll have to be mindful of that so it doesn't take up too much space underneath. Again, I highly recommend using T track-mounted accessories, just because of that limited clearance. As for the height added to the top of your roof, it's gonna be measured top of the roof to the top of the crossbar at around three inches. That's also where your cargo is gonna sit on your crossbar. Your crossbar spread because this is the naked roof, it's not gonna be adjustable. So from center of one crossbar to the center of the other, it's gonna sit at around 28 3/4 inches. So if you have different accessories that require more or less crossbar spread, this is pretty much the fixed point you have. And these are the Inno flush feet towers. So notice how they just end right over here. Your crossbar goes pretty much this far out. You make this nice surface easy to load things onto the tower, but then kind of more difficult if you want a little bit more spread. They are lockable, so with this one key, you get to access all four of your towers, and then now you can pop them off and take off your roof rack system, just like that. So here we have our custom fit kit for your Ford Edge. Please make sure to use our fit guide here at etrailer, where we put together the proper parts to fit your specific vehicle. So notice how this is contoured around the grooves of our vehicle. If you have everything installed properly, that's pretty much what this video is for and you are confident in it and you can easily even slam your door on it without having to worry about it. So we have a weight capacity of 165 pounds with this roof rack system. Something worth considering though is please make sure that you don't overburden your actual roof weight capacity. So calculate the weight of your roof rack system, the weight of your accessories, whether it's a roof box or a roof basket, as well as the weight of your cargo, add that altogether and make sure it doesn't exceed your actual roof weight capacity. Notice as well the way our foot pads sit on top of the roof of our Ford Edge. They do go a little bit over the lip compared to other roof rack systems, but they're also contoured around your roof. So this kit includes all the tools you need to install your roof rack system, but some extra things I recommend adding is a tape measure, as well as this Moki doorstep. So I use this throughout this video just to give myself a little extra height, as well as traction on top of my roof, especially helpful too for when you have accessories like kayaks or things that need to be strapped down. Now let's take a look at that install process. So the install process of this roof rack system can be a little tricky since this is a naked roof system. We have different things here, but that's what this video is for. I'm gonna guide you through the process, kind of explain what the different fit kit pads are for, why there's different numbers on the hooks. That way, you can assemble both the fit kit and the towers and the crossbars onto your Ford Edge. So we're gonna install the front crossbars together. So you have different fit kits, whether it's the right, the left, the rear, or the front. So first, we're gonna get our two crossbars. I already installed the left of our two towers. I installed the left and we're gonna do the right one. So notice how it has different letters on there, showing which one's right, which one's left. I'm gonna use the hook that says 121 on the underside, you can see where that is, and just fit that onto my tower. Then I use this bolt to secure it. Once both of your right and your left are secured with the right hooks, you're then going to attach the feet pads. So here, we have the pad 425. That matches with the hook that we we're using earlier, which is 121. And then make sure that you put it on your tower this way with the ridge facing away from the hook. So we're just gonna pop that in. So we're gonna set up our crossbar with this silver plate. So you're just going to wanna bring your tray out and just slide it out all the way so that you can insert the plate into that tray. Once that's in place, you can then just slide it through. And all the way back, you may have to press this. Oh, you will have to press that button, just to bring this all the way through. Then get your tower, I have the right tower. That's just going to fit loosely onto that tray. Notice how there's a tab right over here. You wanna get that tab in that opening in the tray, just to get that lined up. And then we're gonna pull this tower out, it's gonna secure. Bring it it all the way till the end until this is flush. With this at the very edge of your crossbar, you're then gonna use your included tool to tighten that bolt down in the center. With that fully secured, you're now ready to clip this crossbar onto your roof. So what I like to do is I actually just put the roof rack without the hooks on it first, and then this is just a little extra easier way to do it, then I'll measure for where it needs to go. So for the front crossbar, it needs the 8 3/4 inches from where your door is towards the center of your tower. We'll then line up with that measurement on both sides. That's when I then put the hook with the bolt already attached, and then I tighten that down to the tower. So this has some work on it. So just tighten it down so it clicks twice, just like that. The final step is just to put the end cap onto your tower. So I have it in the unlocked position it then just slides in, and then you can tighten it down to secure that end cap. So do the exact same process for your rear crossbars, following the fit kit for the rear crossbar, as well as the measurement from the rear door. But once that's done and everything's secured like this one is, that's it for the install process. So my personal thoughts about this roof rack system is it's definitely a low-profile system. If you're worried about wind noise or wind drag, and you wanna make or have the most unobtrusive roof rack system you can get, that's what this is. Now if you want more crossbar space, you wanna carry more things, you're having a difficulty reaching all the way into this system, and you want something that's a little bit more accessible, maybe check out our other roof rack system with longer bars. The Yakima roof rack system has 60-inch long crossbars. That's a great option. The Inno through feet may be a good option for you as well with I believe 54-inch long crossbars. Check those videos out just to see they're right fit for you and your adventure. But all in all, this is great if you want something low profile, sleek, and aerodynamic. And that was a look here at our Inno roof rack system with the Inno flush feet and the custom fit kit for your 2020 Ford Edge..
Average Customer Rating: 4.8 out of 5 stars (89 Customer Reviews)
Low-profile, aerodynamic crossbars create an aftermarket roof rack for your vehicle. Aluminum bars have T-slots that let you mount channel-mounted carriers and accessories. Flexible rubber strips in T-slots keep out dirt and won't need trimming.Aero roof rack is very stylish and gives my car a good look. It’s low profile look is what I really enjoy about it. The bars are pretty wide so any bars you do add to them, you’ll have to do IN-DEPTH research to make sure they do fit. I’ve had some run in with some issues with bike racks
Great profile. Looks good on truck.
Locking and unlocking very easy.
I bought these last summer to affix my kayaks to the roof of my corola. my husband, who is decidedly not a handy person, installed them in an hour and they've been great. no issues– slight whistling at times on the interstate, but that's to be expected. highly recommend!
2016 Golf R MK7
Love it so far
By far the best service I have received in a very long time. I recieved my inno flush feet areo crossbars, sooner than expected and the assembly was just as specified. I especially liked having the video with the tutorial.
I like the look of the low profile and the quality is outstanding. I have used this for my kayak and the low profile helps with the loading and unloading.
I would highly recommend this product and Company.
Thank you etrailer my car looks great I spent 4 hours to ensemble this cross bar and the bask rack but finally I made it now I have more cargo space in my car I really recommend etrailer good quality items and good service thanks again
The roof rack arrived days before it was scheduled to. Everything ordered arrived intact. Assembly and installation were pretty easy per the directions included and the video on the etrailer site. The rack looks fine on my Maxda CX5 and the additional noise from the rack is not too bad. Haven't had my cargo box on the rack yet but anticipate no problems with it. My experience with etrailer has been first rate.
I bought this for my 2016 Fiat 500X which has two glass sunroofs, and it fits perfectly! Follow the directions, put the bars where it says to, and your glass will be safe. You can't open the sunroof while this is in place, but hey, at least you can haul gear on your roof without breaking the glass.
Josh is the greatest! Thanks for all the help!
Everything about this kit met my expectations.
- Perfect fit for my Ford Edge, as advertised.
- Lowest bar height that was still high enough for the Edge Vista roof to clear. The glass does clear when nothing is attached to the bars.
- Aero bar shape. I haven't done a lot of miles yet with only the bars and no other attachments.
I attached an Inno roof box (which still fits through my garage door!) and did a 2000 mile road trip at insterstate speeds. Except the box noise (expected), and a bit of a mileage hit, I had no issues. Secure fit the whole way.
Very happy with purchase. This third rack system I have purchased ( for different vehicles) and first Inno system. Seems every bit the quality of my Yakimas and like the attachment portion to roof rails, everything is coated so no possibility of scratching paint on car. Delivery was very quick and Etrailer price matched Amazon!
I bought the whole kit for 2008 honda fit for a cross-country trip, and it performed great. Made it with two surfboards on top with no problems. Instructions for installation are atrocious, but youtube videos can fill in the gaps. Shipping was quick. I didn't use any of the customer service options, but it seems like they would be useful if needed.
I like that the feet don't extend too much beyond the width of the vehicle (2012 Toyota Prius V). No noticeable wind noise or fuel economy change. They held two bikes just fine. The tightening process feels very secure, but took me a while to do. I wasn't in a hurry so it was fine.
The Inno racks have handled an assortment of different loads without problems. They are quiet at highway speeds. The lack of tie down points are the only drawback with these racks.
fast shipping, great customer service, and easy to install
Easy and worked well with the total kit for our vehicle. Feel sturdy and strong. We’re happy with them.
Overall really incredibke experience. I had no idea what type of rack/rails would fit my car. The website asked a couple simple questions and showed me exactly what was compatible. I had a few further questions and I called a customer service rep and she was really nice and helpful over the phone. Ordered my products that day, received an order confirmation email, a shipment email, and a tracking number. Arrived in just a few days. Really happy with my experience.
Shipping and packaging was very good and delivered on time!
Love the flush bar look!
Great product and figment, the service was great as well, the only suggestion I have is if there is a product that cannot be shipped to Canada it should be told when you try to order it, however the follow up call was appreciated .
The entire process was Easy Peasy! Ordering,excellent packaging, and easy install! I couldn't be happier; my hat is off to this fantastic company!!
Easy install, build quality is really nice as is fit and finish. Almost no wind noise at highway speed.
Heavy duty and well designed feet. Love the locking feature, and instructions were clear.
Perfect roof rack for my car.
These are really aero dynamic with a sleek design. It doesn’t cause a lot of of air drag like the super known brand.
Do you have a question about this Roof Rack?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.