Yakima SightLine Roof Rack for Flush Rails - JetStream Crossbars - Aluminum - Black - Qty 2
Item # Y89KB
Our Price: $688.85
Confirmed to Fit
2023 Chevrolet Tahoe
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
- All Info
- Reviews (109)
- Q & A (0)
- Videos (54)
- Photos
Yakima Roof Rack - Y89KB
- Aero Bars
- Crossbars
- 60 Inch Bar Space
- Yakima
- Black
- 2 Bars
- Overhang
Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity.
Features:
Yakima JetStream Crossbars - 60" Long - Black - Qty 2:- Quiet, low-profile crossbars let you build an aftermarket roof rack for your vehicle
- Pair with Yakima towers and a fit kit to create a complete roof rack
- Asymmetrical JetFlow shape creates an extremely aerodynamic roof rack system
- Built-in WindRidges help control air flow over bars to dramatically reduce wind noise and vibration
- Aero-style bars reduce drag to help maintain fuel efficiency
- Full-length design maximizes space for carriers and accessories
- Versatile crossbars accommodate accessories that mount in the T-slots or clamp around the bars
- Works with most universal-mount bike, water, snow, and cargo carriers
- Rubber SmartFill strips in T-slots allow for easy installation of channel-mounted accessories
- Simply push down on the SmartFill strips to slide in accessories - no trimming required
- Bottom channels allow for easy installation on Yakima towers
- Fit BaseLine, RidgeLine, SkyLine, and TimberLine towers
- Etched measurements on bottoms of bars help center rack on your roof
- Lightweight aluminum bars are durable and rustproof
- Internal JetTruss extrusions provide exceptional bar strength
- Black powder coat finish is corrosion resistant
Yakima SightClip 55:
- Custom-fit clips and pads allow you to mount 4 SightLine or RidgeLine towers on your vehicle with flush, factory side rails
- Inner and outer clips tighten together with a single bolt for even, secure grip on rails
- Snap into place on DropHooks inside towers
- Powder coated stainless steel clips are durable and rust resistant
- Molded rubber pads fit the contour of your side rails
- Clip onto bottoms of towers
- Protect side rails from scratches and abrasions
Yakima SightLine Towers - Qty 4:
- 4 Low-profile towers mount Yakima crossbars to your vehicle with flush, factory side rails
- Pair with 2 Yakima crossbars and SightClips or RidgeClips to create a complete roof rack
- Tower pitch can be adjusted 6 degrees forward and 6 degrees backward to level your crossbars
- Pivoting bases automatically adjust during installation to ensure towers are seated correctly
- Versatile BarBeds are curved to accommodate the elliptical shape of Yakima JetStream crossbars
- Safe and easy installation with included torque tool
- Clip holder adjusts on 3 axes for perfect fit on your flush rails
- SightClips or RidgeClips attach to hooks in tower assemblies and tighten together for even, secure grip on rails
- Torque tool clicks 3 times when clips are secure - eliminates fear of under- or over-tightening
- Lockable with Yakima Same Key System (SKS) lock cores (Y07204 - sold separately)
- Durable, weather-resistant stainless steel, glass-reinforced plastic, and elastomer construction
8000426 Yakima Jet Stream Cross Bars - Aluminum - 60" Long - Qty 2 - Black
8006455 Custom Sight Clips and Pads for Yakima Sight Line and Ridge Line Towers
8001635 Yakima Sight Line Roof Rack Towers - Qty 4
Replaces Yakima RidgeLine Y00145
Video of Yakima SightLine Roof Rack for Flush Rails - JetStream Crossbars - Aluminum - Black - Qty 2
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Yakima JetStream Crossbars Installation - 2022 GMC Sierra 1500
How's it going, everyone It's Ethan here with etrailer. Today we're going to be taking a look at the Yakima Roof Rack System with our JetStream crossbars and showing you how to install them on our 2022 GMC Sierra. If you're transporting a large amount of items or just large items in general and you don't have room in your bed, or they're just items you'd rather keep out of the cabin of your vehicle, a roof rack system like this is gonna be a good way to do that. The crossbars that we have here are an aerodynamic shape so they taper in the back just to cut down on some of that wind noise and wind resistance. With any sort of roof rack system, you'll get a little bit, but this is nice that it cuts some of that down. Additionally, it does feature this rubberized strip inside this T-track slot, so you can use these roof rack with T-track accessories and there's no need to trim the actual strip to get those on.
As far as the length of our crossbars go, there are a couple of different options as far as length. These are 60", which we found gives us enough room on top and enough overhang. The overhang that we have, we're measuring at 5", which gives you a little bit more room for accessories without being overbearing or sticking over your vehicle too much. With a weight capacity of 165 pounds, these crossbars will do a fine job of storing most of the bigger items that you might need, but something to keep in mind when you are storing those items is are they going to make contact with the top of your roof So we'll just measure from the roof to the bottom of our crossbars. It's about 3 1/2", so if your accessories do have clamps or things that hang onto the crossbars, you wanna keep that measurement in mind.
Additionally, to see how much height we're adding to the top of our vehicle is about 4 1/4", so if you live with these crossfires on your vehicle, that's how much you're gonna be adding to it. Additionally, if you have taller bindings on your skis or things like that, that's a good measurement to keep in mind to see if those will make contact with your vehicle as well. To start the install process, we like to just lay everything out, making sure that we know what everything is and that we have it. So we're going to obviously have our crossbar here, two towers, the covers for the towers, two hooks that'll keep the actual feet in place, two pads for the bottom, and our end caps. Additionally, there is a provided tool and we recommend going ahead and grabbing a fabric tape measure.
They do provide one, but we have our own. We'll start by assembling our towers. First thing, we probably want to loosen this metal plate here. We do that first actually by releasing this security lever. As you can see, it covers it.
If you pull it back, you have access to get in there. So we'll loosen that. And in our case, there are three different steps for the GMC Sierra that we're going to be putting these on. They do recommend setting it to C, but make sure you check the manual and see what's recommended for your vehicle. Now the next step is to get the actual feet on the towers. So ours came with a plastic cover. We just removed that, and making sure that this arrow on the tower is facing out, it just snaps into place. (feet snapping onto tower) And now we can go ahead and slide this onto our crossbar. Because we loosened that metal plate earlier, it should just slide right onto our track like so. Make sure you consult the manual to see the specific measurements for your vehicle, but as you can see, there are little ruler notches on the actual crossbars themselves, so using those will slide the feet to the point where we need it, which is right about here, in our case, and we can get that tightened down. (screwdriver twisting) Once we have our feet on, we can put our end caps back on just like that. As you can see, we already have our first crossbar installed. We got our measurement from the end of our glass windshield here and took it up to the front of the tower. It's going to be vehicle specific, but we have it where we need it in our case. Now we can fit our crossbar onto the roof of our vehicle, trying to do it as carefully as possible. The pads on the bottom should make it a little bit nicer on top of your vehicle, but we'll get it vaguely where we need to be and adjust it. When you actually place the crossbars on top of the vehicle, these feet are nice 'cause they will actually fit in the ridges on top of your roof. Now that we have our crossbars roughly where we need them to be, we'll take a measurement to make sure that the crossbar spread is what's recommended for our vehicle. In our case, it is 32", so we're about there. Just slide this forward a little bit and that's pretty good. Now we'll get clamps installed as well, starting by opening up that security door again, sliding it through, and all we have to do is get our tool through the middle of there and tighten it, probably not all the way just yet. We're gonna have to adjust our other side and we'll probably wanna go back and forth tightening it down just to make sure that one side isn't over-torqued. We've tightened the other side to where we need it to be and this one's about where we need it as well, so we'll close that security gate up and we can fit our racks back, or the end cap back on starting with these cringes down at the bottom and click that in place. Once you've done that, that's basically it. Fairly simple installation, as long as you know where all the pieces are and what they do, but you're ready to hit the road. Overall though, I think that the Yakima Roof Rack System is a sleek and pretty effective roof rack system. I like that the arrow bars will cut down on that wind resistance and I really like that rubberized strip that I don't have to trim. Now, if aesthetics are something that's really important to you, we found that the Rhino-Rack Roof Rack System looks just a little bit sharper, but I like the install of the Yakima Roof Rack System a little bit better, just a little bit easier if you're gonna be taking it on and off a lot, in my opinion, and overall, I think that it's a really nice fit on our 2022 GMC Sierra.
Customer Reviews
Yakima SightLine Roof Rack for Flush Rails - JetStream Crossbars - Aluminum - Black - Qty 2 - Y89KB
Average Customer Rating: 4.8 out of 5 stars (109 Customer Reviews)
Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity.by: Jonathan05/24/2024
Works well, after getting them in place. On my Kia Sorrento it's very tricky to get the towers to fit the holes in the factory rails -- takes a lot of loosening and readjusting the bars.
by: Frank02/10/2023
Ford Edge
Not a bad setup. I dont believe you need the 60" bars i received as they hang over the edge of your Hyundai. You need to watch your head getting in and out of your vehicle. The Jetstream crossbars are very loud at speeds over 65 mph. Im probably used to it by now, but it is definitely noticeable. Much louder than an older Rhino Rack of similar dimensions i had. Install was simple and took about 30 minutes, just take your time and measure correctly like all roof racks.
by: Tim 10/18/2023
One quick phone call and Gwendolyn figured out exactly what I needed for our new car to use my old Yakima rack.
by: Mark 01/11/2024
These REALLY need instructions! I can't imagine their function.
by: Bob L11/30/2023
product was just what I needed The folks at etrailer were extremely helpufl!!
by: DogDoc04/12/2024
Ford Expedition
Easy to install. It probably took 45min. I bought them for my 2024 Expedition to haul a canoe. I have not done that yet but I expect no issues.
by: Robert 02/06/2024
My only complaint is the time it took to get my order. I understand this was out of your hands and dependent on supply problems.
by: Elliott08/04/2018
2015 Jeep Grand Cherokee
I have a 2015 Jeep Grand Cherokee SRT which has the non-functional roof side bars. Etrailer.com helped me figure this out and gave me several options that would work. As I already have Yakima bike racks - I wanted to stick with the brand. The price on etrailer.com was the same as Yakima but had free shipping and no tax - awesome. Product arrived quickly!
I went with the Yakima 60" Jetstream cross bars, baseline towers, and the appropriate pads and clips.
The Yakima product came with thorough and easy to understand instructions. I was able to get the track installed and working in about an hour - and that was taking it slow and double checking everything. I was very pleased with the fit and finish.
After a test run, there was no wind noise or issue with the rack. Looking forward to taking a road trip next month with it!
by: Rod12/05/2021
2010 Jeep Grand Cherokee
Product exactly as expected. Quality bars. Using on a 2021 Jeep Grand Cherokee L. Looks great installed. Little to no wind noise. And, as usual, top notch service by the etrailer crew! Have purchased several items from etrailer over the past 10 years and have always been impressed by how timely they are and how responsive and helpful they have been regarding product questions. They are absolutely the first merchant I go to when shopping on line!
by: John 08/31/2017
2015 Ford Fusion
The Yakima rack system for my 2015 Ford Fusion is an awesome product! I hadn't needed to buy aftermarket racks in many years. These are a super solid, beefy, and very well made product. I am very impressed with the quality and fit. Yakima has obviously put lots of design time into them. And etrailer does an outstanding job of making sure you get the right product for your specific need.
I chose this rack specifically because of the spread between the bars - 32" - and for the higher weight limit, as I'm carrying a fishing kayak.
by: Adam K05/14/2023
Pretty straight forward installation. Instructions were easy to follow.
by: 10/06/2023
Love it! We've made several long trips with full luggage loads.
by: Andrew04/04/2023
Easy to order and quick to ship. Took a bit of time to get these installed correctly so they fit just right.
by: Joseph08/23/2021
Pontiac Trans Sport Van
1 year later and still love my Yakima JetStream system. I've mostly used them to transport my kayak however I've also been able to transport some big box store items as well. They are very versatile. There is a t-track option as well as wrap around attachments. I've use ladder attachments, eyebolts, and Thule Hullavator in t-track. I've used Malone MegaWing and Yakima Skybox as wrap around attachment. What I really like about the t-track system is that you do not need to cut out the rubber track insert. You simply slide over the rubber, which allows you to adjust your system, on the fly, to load what you need to carry.
by: Chad12/07/2018
Excellent product. These bars are very quiet and look great on our truck. Assembly and installation was straightforward. We've used these bars to secure our large Yakima car top carrier and have traveled on several trips to the mountains and cabin with no issues. I suggest ordering an extra set of end caps as we've lost one in the car wash. However, have had no problems with the bars when going through the car wash.
As always, I GREATLY appreciate the superior product support that etrailer.com provides. They have the best product content on the web, hands down.
by: Nicholas07/11/2023
Order was easy to place and delivered in less than a week as promised. The sales advice was perfect fit despite multiple pieces having been ordered. Used the rack once and very sturdy
by: Daryl04/29/2020
Jeep Cherokee
These Yakima crossbars are a part of the Yakima towers I bought to install on my Jeep Cherokee to hold a pair of Kayaks. They fit great as advertised. In fact I got these discounted as an open box. I would have never known, they look brand new. Thank you etrailer for your great advice, customer service and quick shipping process.
by: Robert 01/06/2022
The bars are sturdy, aerodynamic and super strong. I bought this to fit a Yakima Skybox 16 and these worked great. The measurement ticks on the bottom assist with getting the box centered and have a great gasket system that you fit yourself. These mounted pretty quick even in 20 degree weather.
etrailer sold this as a set based on my car and every piece was great and a perfect fit. Communication and tracking info was great and they delivered it a day before promised.
by: Andrew08/01/2023
Great! Easy to install!
by: Joao07/18/2023
Great service and great staff. They will have all the technical information you need.
by: Richard06/10/2020
Ordering was a breeze. Fast shipping. Excellent communication. Product arrived well-packaged. Product easy to install; completely as described. Yakima products are superior-performers. etrailer is an excellent source for truck & trailer products.
by: SJHughes12/23/2017
High quality bars that were easy to install to the Skyline towers and work great with our Yakima JayLow kayak carriers.
by: Tom03/30/2021
Received order promptly thanks to help from Korren! Love Yakima products, well made, components all fit well. Instruction were easy to follow and the products have been well thought out in terms of markings, measuring distances to my specific car model and ease of assembly.
by: Greg N.11/18/2021
Ford Expedition
I had a need for the Yakima Crossbars and Towers for my Expedition. With a short delivery time frame, I contacted etrailer knowing they are the best. Justin B. worked with me to get the correct parts then made sure that the products arrived in time, it did. The Towers, Bars and overall excellent customer service from etrailer made for a great experience. Thanks again for exceeding expectations etrailer!
by: Eugene01/29/2021
2017 ChevroletTahoe
Fast delivery. Yakima roof system for my 2017 Tahoe was perfect.
25
388
Show More Reviews
See what our Experts say about this Yakima Roof Rack
- Recommended Roof Rack on a 2023 BMX X5 M50 w/ Flush Rails Thanks for the picture! The 60" crossbars might be a bit wide. The roof racks with the longer crossbars are typically used for kayak carriers or people that need to mount two bike racks. I recommend going with more of a flush mount set up and we do have one made by Yakima. It is the 2023 BMW X5 roof rack by Yakima and it includes the following parts: Yakima SightLine FX Roof Rack for Flush Side Rails - JetStream Aero Crossbars - Black - Qty 2 item # Y73UV SightClip Fit Kit for Yakima...
view full answer...
- Recommended Roof Rack for a 2023 GMC Yukon XLTo add a roof rack to your 2023 GMC Yukon XL, you will want the roof rack by Yakima which includes the following parts: Yakima JetStream Crossbars - Aluminum - 60" Long - Qty 2 item # Y00426 Black or item # Y00429 in Silver SightLine Towers for Yakima Crossbars - Flush Side Rails - Qty 4 item # Y64AR SightClip Fit Kit for Yakima SightLine and RidgeLine Roof Rack Towers item # Y44UV I have attached a couple of pictures below that will show you what this roof rack looks like and how to...
view full answer...
- Roof Rack For 2016 Honda Pilot For Two Thule HullavatorsI am going to assume your 2016 Honda Pilot has flush side rails and that you can remove your factory roof rack, and if so there is a way to use a pair of the Thule Hullavator Pro # TH898, but the ShowDown is far too wide to put on next to the Hullavator. If you're okay using a pair of Hullavators, the roof rack you need for your '16 Pilot is the following, from Yakima: - Yakima JetStream Crossbars # Y00426 - SkyLine Towers # Y53TR - Landing Pad 19 # Y00245 You can lock the roof rack...
view full answer... - How Can I Tell if I have Fixed Mounting Points on My 2015 Mazda CX-5 for a Crossbar System?According to the specs I have, you may have fixed mounting points on those rubber strips on your 2015 Mazda CX-5. The way you can tell is if there is a small removable tab on those rails that cover the holes. I went ahead and attached a video of a 2015 Mazda CX-5 with fixed mounting points to give you perspective about what to look for. If you determine that you have fixed mounting points, I recommend the following setup: - Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 46" #...
view full answer... - Recommended Roof Rack and Cargo Box For a 2023 Kia Telluride SX X-Pro With Factory Raised RailsI recommend installing the Yakima JetStream roof rack on your 2023 Kia Telluride SX X-Pro with the factory raised roof rails. You will need the JetStream Crossbars # Y00426 with the Timberline Towers # Y33TR for this. This roof rack will pair well with the Yakima SkyBox 18 Rooftop Cargo Box # Y07336 for carrying additional cargo on your roof. This box can be opened from either the drivers or passenger side allowing you to position it in the center or on either side of your Telluride if...
view full answer... - Roof Rack that Can Fit Tracks of Pace Edwards UltraGroove for 2022 Ford F-250The Pace Edward UltraGroove Tonneau cover part # PE87QJ for your 2022 Ford F-250 long bed has tracks that are basically the same as the tracks on campers that were designed for roof racks. To add a set of crossbars to these tracks I recommend the Yakima 60 inch JetStream Bars # Y00426 along with the Landing Pad # Y00221 and Towers # Y00148 to attach them to the tracks. This will give you a set of aero shaped bars that are very high quality and quiet that also have channels on the top of...
view full answer... - Roof Rack for Installing Two Thule Hullavator Kayak Carriers on Roof of 2020 Toyota RAV4By '4 Hullavators', I'm assuming you're meaning two sets which would allow you to carry two kayaks. Installing 2 Hullavators for carrying two kayaks will be a tight squeeze on the roof of a RAV4. You'll also need to keep in mind that each set of Hullavators weighs about 40 lbs, and most roof rack setups have a capacity of 165 lbs. This leaves you 80-85 lbs of capacity for the 2 kayaks in order to not overload the roof rack. If the combined weight of your Kayaks is less than 85 lbs, you...
view full answer... - What Roof Rack Can I Use with the Thule Hullavator on My 2022 Toyota Highlander with Flush Rails?I have a great solution for your flush rails on your 2022 Toyota Highlander to use the Hullavator # TH898. Yakima temporarily discontinued the Y00148 because they are updating the feet to fit a wider range of vehicles. Yakima has been changing a lot of fitments lately because of this factor. The landing pads # Y66VR are separate from the Y00148. However, with that being said, Yakima does have a roof rack system that fits your flush rails with a different model of feet. For that system,...
view full answer... - Recommended Roof Rack for a 2014 Honda Civic Si CoupeTo add a roof rack to your 2014 Honda Civic Si Coupe you will want the roof rack by Yakima and it includes the following parts: Yakima JetStream Crossbars - Aluminum - Black - 60" Long - Qty 2 item # Y00426 BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06125 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06143 This roof rack attaches to the groves inside your door...
view full answer... - Roof Rack For 2022 Lexus GX 460 For Thule HullavatorSure thing, we can get your 2022 Lexus GX 460 set up with a roof rack for your Thule Hullavator # TH898, and what you'll need is a rack from Yakima. The correct parts for your Lexus are the following: - Yakima JetStream Crossbars - Silver # Y00429 or Black # Y00426 - SkyLine Towers for Yakima Crossbars # Y53TR - Landing Pad 30 # Y25ZR I also recommend adding locks to protect your roof rack, keeping it secure on your Lexus. You can add those with the Yakima Same Key System (SKS) Lock...
view full answer... - Quietest Cross-Bars For A 2017 Ford F-150 Super Crew CabFor your 2017 Ford F-150 SuperCrew Cab, we have several different options that will suit your needs. To start, we offer the Yakima JetStream Crossbars # Y00426. These bars are the quietest, are 60" long, and is rated for up to 165lbs. To go with those bars you will also need the BaseLine Towers for Yakima Crossbars # Y28TR, and the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06122. We always recommend using some type of locking system to keep all of your items safe; The Yakima...
view full answer... - Roof Rack Recommend for 2016 Honda CR-V to be Transferred to Truck Camper ShellI can definitely help you out with getting the most parts that will transfer over from your 2016 Honda CR-V! The Yakima roof rack is the way to go since it uses the longer 60" bars as they should transfer over to your truck cab nicely. The only problem is that the legs used for the naked roof on your CR-V won't be compatible with a track system so you will need to get new legs and a different fit kit for the tracks on your truck. A lot of truck camper shells do come with a track system...
view full answer... - Thule Kayak Carrier Recommendation for T-Slot Mount on Yakima JetStream Crossbars on 2022 HighlanderIt truly depends on what Thule kayak carrier you wish to use on the Yakima JetStream Crossbars. For example, the Thule DockGlide # TH896 is compatible with the top slots of the JetStream crossbars without any additional nuts. I definitely recommend the DockGlide because it is a saddle-mount style that is much easier to load than the awkward positioning of j-style carriers. In order to have a full JetStream setup of a roof rack on your 2022 Toyota Highlander, it depends on what roof type...
view full answer... - Recommended Roof Rack for a 2024 Acura RDX w/ a Naked Roof Congrats on the new SUV! Yes, we do have a way to attach a roof rack to your 2024 Acura RDX even though you do not have roof rails. It is the roof rack by Yakima and it includes the following parts: Yakima JetStream Crossbars - Aluminum - 60" Long - Qty 2 item # Y00426 for Black or item # Y00429 for Silver BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06174 BaseClip Fit Kit for Yakima BaseLine...
view full answer... - Yakima Roof Rack For A 2022 Acura MDX With Flush Factory Side RailsFor your 2022 Acura MDX, I recommend the Yakima JetStream Crossbars # Y00426. These crossbars are 60" long, and have a maximum capacity of 165-lbs. Next, you'll need towers like the BaseLine Towers for Yakima Crossbars # Y28TR which have maximum capacity of 220-lbs. Following the towers, you'll need the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06163 and # Y06178.
view full answer... - What Parts do I Need to Mount Yakima JetStream Crossbars to the Yakima 54" HD Tracks # Y64MR?Yes! If you have the Yakima JetStream Crossbars # Y00426 already, you can use the Yakima 54" HD Tracks for Roof Racks, OverHaul HD, and OutPost HD # Y64MR to use your crossbars. Here are the additional parts you need to make it happen: - x2 Landing Pad 26 for Yakima SkyLine Towers - Qty 2 # Y75ZR - x4 Replacement SkyLine Tower for Yakima Crossbars - Qty 1 # 8880614 With these components, you will be able to use your JetStream crossbars on the tracks.
view full answer... - Recommended Roof Rack for Thule Hullavator and Another Kayak Carrier on 2019 Toyota RAV4Assuming you have factory installed raised side rails on your 2019 Toyota RAV4, to carry the Thule Hullavator Pro # TH898 and another kayak rack I recommend 60 inch crossbars, which are going to stick out from your RAV4, so you will want to always keep note of that. In order for the Hullavator to work, it requires 4-8 inches of crossbar overhang (past the feet) on each side. The reason is, the Hullavator Pro requires 28.5 inches of crossbar space and another rack will take up a similar...
view full answer... - Recommend Roof Rack for Mounting Two Hullavators on a 2023 Hyundai Santa FeI have two options to mount a couple of Hullavators item # TH898 on your 2023 Hyundai Santa Fe. Which one you need completely depends on what is currently on your roof. There are two options one for a bare roof model and one with side rails. I have listed both options below: Naked Roof No Rails - Yakima JetStream Crossbars - Aluminum - Black - 60" Long - Qty 2 item # Y00426 BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR BaseClip Fit Kit for Yakima BaseLine...
view full answer... - Will the 60-Inch WingBar Evo Crossbars Fit My 2022 Kia TellurideThe reason why 60-inch WingBar Evo Crossbars # TH711520 are not rated to fit your 2022 Kia Telluride is because the WingBars have attachment slits on the bottom where it connects to the Evo Flush Rail Feet # TH710601 with the Fit Kit for Thule Evo Flush Roof Rack Feet - 186095 # TH77JV. If the crossbars are too long and your roof is too narrow, the slit where the feet connects to the crossbar will not extend far enough to connect, which is the case with the 60-Inch Wingbars. I went ahead...
view full answer...
- Yakima Crossbar Length For 2022 Lexus GX 460 & HullavatorI checked with Yakima regarding the crossbar length, and they do say 50, which is odd for your 49 inch rails. With that distance between your rails, don't use the 50 inch bars, use the 60 inch long JetStream bars, either Silver # Y00429 or Black # Y00426. The rest of the parts for the Yakima rack on your 2022 Lexus GX 460 remain the same; Towers # Y53TR, Landing Pad 30 # Y25ZR and Lock Cores # Y07204.
view full answer... - Best Roof Rack for 2019 Ford Focus Hatchback That Doesnt Make NoiseWe have the perfect roof rack for you to put on your 2019 Ford Focus hatchback which uses JetStream crossbars from Yakima. This rack is composed of: - JetStream Crossbars # Y00426 - BaseLine Towers for Yakima Crossbars # Y28TR - BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06135 - BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06105 The aerodynamic shape of the JetStream bars, along with their built-in WindRidges, is what ensures that this roof rack minimizes the...
view full answer...
- Will the Malone SeaWing Kayak Carrier Work With the Rola Roof RackYes, the Malone SeaWing Kayak Carrier part # MPG113MD will work with the Yakima Series Roof Rack made of parts # Y00426, # Y28TR, and # Y06183 which is a fit for your 2011 Honda Pilot. This Yakima Roof Rack has standard size aero crossbars so the Malone SeaWing Kayak Carrier will work without any issue at all. This will be an excellent way to carry a kayak on your Honda Pilot. The carrier comes with tie-downs too so you will be ready to hit the water once you receive the above, nothing...
view full answer... - Can Longer Yakima Crossbars be Used on 2023 Honda HR-V For Thule HullavatorYou can definitely use longer Yakima crossbars on your 2023 Honda HR-V for the Thule Hullavator Pro # TH898, but don't go all the way to the 70 inch # Y00427, as these are 20 inches longer than the recommended # Y00425 and will stick out way too much on your HR-V. So instead use the 60 inch Yakima JetStream Crossbars # Y00426. Then to complete the rack set up on your '23 HR-V you do have the right parts with the BaseLine Towers # Y28TR, and Fit Kits # Y06159 & # Y06181. In regards to...
view full answer... - Recommendation on a Roof Rack and a Kayak Carrier to Fit a 2016 Ford F-150 Super CabI have a solution for a roof rack and kayak carrier for your 2016 Ford F-150 Super Cab. I recommend the Yakima JetStream Roof Rack System, # Y00426 JetStream Crossbars, # Y28TR BaseLine Towers, and # Y06122 BaseClip Fit Kit. The JetStream bars are an aerodynamic aero design that will cut down on wind drag and noise when in transit. The crossbars are constructed of lightweight and sturdy aluminum and full length design allows for maximum space for carrying roof mounted accessories. For...
view full answer... - Recommended Roof Rack on a 2023 BMX X5 M50 w/ Flush Rails Thanks for the picture! The 60" crossbars might be a bit wide. The roof racks with the longer crossbars are typically used for kayak carriers or people that need to mount two bike racks. I recommend going with more of a flush mount set up and we do have one made by Yakima. It is the 2023 BMW X5 roof rack by Yakima and it includes the following parts: Yakima SightLine FX Roof Rack for Flush Side Rails - JetStream Aero Crossbars - Black - Qty 2 item # Y73UV SightClip Fit Kit for Yakima...
view full answer... - Roof Rack Recommendation for Carry Thule Motion XT Box on a 2023 Lexus GX 460It does look like the OEM roof rack kit on your 2023 Lexus GX 460 is going to sit really close to your roof so I recommend replacing that with an aftermarket system to ensure you have enough clearance to your roof for the Thule Motion XT Rooftop Cargo Box # TH629706 to fit. I recommend using the Yakima JetStream system which includes the following parts: - 50" JetStream Crossbars # Y00425 - SightLine Towers # Y64AR - SightClip Fit Kit # Y96AR - Lock Core Kit # Y07204 (optional)
view full answer... - Recommended Roof Rack for a 2023 GMC Yukon XLTo add a roof rack to your 2023 GMC Yukon XL, you will want the roof rack by Yakima which includes the following parts: Yakima JetStream Crossbars - Aluminum - 60" Long - Qty 2 item # Y00426 Black or item # Y00429 in Silver SightLine Towers for Yakima Crossbars - Flush Side Rails - Qty 4 item # Y64AR SightClip Fit Kit for Yakima SightLine and RidgeLine Roof Rack Towers item # Y44UV I have attached a couple of pictures below that will show you what this roof rack looks like and how to...
view full answer... - Recommended Kayak Carrier for 2020 Mazda CX-5The only hitch mounted option wouldn't be an actual carrier, but a support like the Malone Axis # MAL32VR. This would require the installation of a trailer hitch like the # 76138 you looked at. More than likely you won't need this to mount your kayaks on your 2020 Mazda CX-5. Your kayaks will fit completely on a roof rack with a kayak carrier like the one seen in the picture below unless they are incredibly long. If that is the case, then by all means you could add the # MAL32VR to help...
view full answer...
- Recommended Roof Rack for a 2023 Mazda CX-5 to Use the Thule Hullavator Pro Kayak CarrierIn order to use the Thule Hullavator Pro # TH898 on your 2023 Mazda CX-5 you will need to have a roof rack with crossbars that extend 4"-8" past the roof rack feet. If you have a roof that has no existing crossbars or rails, I recommend the 2023 Mazda CX-5 Roof Rack by Yakima which consist of the: - Yakima HD Crossbars # Y01156 - BaseLine Towers for Yakima Crossbars # Y28TR - HD Bar SL Adapter # Y03541 - BaseClip Fit Kit # Y06130 - BaseClip Fit Kit # Y06154 If you have flush mounted...
view full answer... - Towers for Yakima RoundBar on 2024 Honda CR-V HybridThere are towers available that will allow you to install your Yakima RoundBars on your 2024 CR-V Hybrid. You will need the following: -SightLine Towers for Yakima Crossbars - Flush Side Rails - Qty 4 # Y64AR -RoundBar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers - Qty 4 # Y03536 -SightClip Fit Kit for Yakima SightLine and RidgeLine Roof Rack Towers # Y44UR If you have Yakima Same Key System locks you can transfer them over or you can add new locks using...
view full answer... - Recommended Roof Rack for a 2023 Mazda CX-50 w/ Flush Rails That is helpful and we do have a Yakima roof rack that will attach to the flush rails on your 2023 Mazda CX-50. It is the roof rack by Yakima and it includes the following parts: Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 item # Y00425 SightLine Towers for Yakima Crossbars - Flush Side Rails - Qty 4 item # Y64AR SightClip Fit Kit for Yakima SightLine and RidgeLine Roof Rack Towers item # Y27AR This aero bar roof rack system has a 165 lbs capacity. I recommend...
view full answer... - Yakima HD Roof Rack and LockNLoad Fitment on a 2021 GMC Yukon AT4The parts you need to build a Yakima HD roof rack kit for the flush rails on your 2021 GMC Yukon AT4 includes the following parts: 60" HD Crossbars - # Y01157 HD Bar SL Adapter - # Y03541 SightLine Towers - # Y64AR SightClip Fit Kit - # Y44UV Lock Core Kit - # Y07204 (optional) This will work great with the Yakima LockNLoad Platform Rack for Crossbars # Y45UV, but we still need to talk about the weight ratings as you do bring up a great point. The Yakima HD bars are actually rated for...
view full answer... - Which Yakima Roof Rack Feet Fit 2021 Mazda CX-5Hey Sheldon, the correct feet kit for your 2021 Mazda CX-5 is the Yakima Sightline # Y64AR with the Sightclips part # Y39AR and you'd be set since you have the crossbars already.
view full answer... - How to Add Crossbars to a 2024 Honda CR-V w/ Flush Roof RailsYes, we do! To add a set of crossbars to the flush mounted rails on your 2024 Honda CR-V, I recommend the roof rack by Yakima which includes the following parts: Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 item # Y00425 SightLine Towers for Yakima Crossbars - Flush Side Rails - Qty 4 item # Y64AR SightClip Fit Kit for Yakima SightLine and RidgeLine Roof Rack Towers item # Y44UR
view full answer... - Yakima Aero Roof Rack for 2022 Mazda CX-5 with Flush RailsYakima has their JetStream roof rack part numbers # Y00428, # Y64AR, # Y39AR that fit the flush rails of your 2022 Mazda CX-5. This does connect to your roof using the door mounts though but there isn't a different style of rack available.
view full answer... - Recommended Roof Rack for a 2023 Kia Niro PHEV We have a set up that will allow you to add crossbars, however I checked with our vendors and did not see a hitch available for the 2023 Kia Niro PHEV and there's no indication that one is coming. Nobody made one for the 2022 either so it's not looking like there's going to be one. To add a set of crossbars to your Kia Niro, I recommend the roof rack by Yakima and it includes the following parts: Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 item # Y00425 SightLine...
view full answer... - Recommended Roof Rack for a 2024 Hyundai Tucson w/ Flush Mounted Roof Rails Congrats on the new SUV! Yes, there is a way to install a roof rack on your 2024 Hyundai Tucson with rails even though it has the panoramic sunroof. I recommend the roof rack by Yakima which includes the following parts: Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 item # Y00425 SightLine Towers for Yakima Crossbars - Flush Side Rails - Qty 4 item # Y64AR SightClip Fit Kit for Yakima SightLine and RidgeLine Roof Rack Towers item # Y27AR This aero bar roof rack system...
view full answer... - Recommended Roof Rack for a 2024 Mazda CX-50 w/ Flush Rails To add a roof rack to a 2024 Mazda CX-50 with flush rails, I recommend the roof rack by Yakima which includes the following parts: Yakima JetStream Crossbars - Aluminum - 50" Long - Qty 2 item # Y00425 in Black or item # Y00428 in Silver SightLine Towers for Yakima Crossbars - Flush Side Rails - Qty 4 item # Y64AR SightClip Fit Kit for Yakima SightLine and RidgeLine Roof Rack Towers item # Y27AR This aero bar roof rack system has a 165 lbs capacity. I recommend adding the Yakima Same...
view full answer... - Recommended Round Bar Roof Rack for a 2024 Honda CRV w/ Flush RailsYes, you can! The SightClip Fit Kit item # Y44UR and the SightLine Towers for Yakima Crossbars item # Y64AR will allow you to install your Yakima Roudbars to your CRV's flush rails. You will also need the RoundBar SL Adapter for Yakima Towers item # Y03536.
view full answer... - Aero Bar Roof Rack that Fits 2023 Kia Niro PHEVI have a roof rack solution that does fit your 2023 Kia Niro with flush bars but the Malone racks require a raised rail like you mentioned so it would not work. Instead you'd need a rack designed to attach to the flush rails like with the Yakima CoreBar roof rack part numbers # Y00421, # Y64AR, and # Y27AR which is a similar aero shaped crossbar to the Malone.
view full answer... - Recommended Roof Rack for a 2017 Lexus RX 350 w/ Flush Rails To add a Yakima roof rack to the flush rails on your 2017 Lexus RX 350 you will need the following parts: Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 item # Y00425 SightLine Towers for Yakima Crossbars - Flush Side Rails - Qty 4 item # Y64AR SightClip Fit Kit for Yakima SightLine and RidgeLine Roof Rack Towers item # Y59AR This aero bar roof rack system has a 165 lbs capacity. I have linked an installation video below to help you get it set up. I recommend adding...
view full answer... - Can Thule AeroBlade Edge Cross Bars Be Used On a 2023 Kia Niro Or What Option Is ThereI contacted the manufacturer and there is not an option that will allow you to use the Thule AeroBlade Edge Crossbars on your 2023 Kia Niro. The Fit Kit for Thule Evo Flush Roof Rack Feet # TH57JV you asked about, which works with the Evo Flush Rail Feet for Thule Crossbars # TH710601 does work with the AeroBlade crossbars but they do not work with your 2023 Kia Niro. We do not currently have an option from Thule for your 2023 Kia Niro, but we do have an option from Yakima. 2023 Kia...
view full answer... - How to Determine Correct Roof Rack For 2024 Kia TellurideI'm going to go ahead and respectfully disagree that we're idiots, Paul. I'm confident we can figure out the combination for a roof rack on your 2024 Kia Telluride, and there are three possible options Kia has for your roof - flush-mounted rails, raised side rails, and a bare roof. I made some diagrams below showing test fits on a Kia Telluride with photos from the nice folks at Yakima so you can see the difference (please note these are just test fit photos, and not exactly how the rack...
view full answer...
- Roof Rack Recommendation for a 2023 Honda CR-V with Flush RailsThule currently (March 2023) doesn't have a roof rack fitment for your 2023 Honda CR-V but I do have an alternative option for you through Yakima with their SightLine System: - 50" JetStream Crossbars # Y00425 - SightLine Towers # Y64AR - SightClip Fit Kit # Y44UR - Lock Core Kit # Y07204 (optional) If you let me know what you plan on using the roof rack for I'd be more than happy to make an additional recommendation for you!
view full answer... - Parts Needed to Add a Yakima Roof Rack to a 2024 Kia Telluride w/ Flush Rails Yes, we do! There are quite a few different options. To add a Yakima roof rack to your 2024 Kia Telluride with flush rails you will need the following parts: Yakima JetStream Crossbars - Aluminum - 50" Long - Qty 2 item # Y00425 in Black or item # Y00428 in Silver SightLine Towers for Yakima Crossbars - Flush Side Rails - Qty 4 item # Y64AR SightClip Fit Kit for Yakima SightLine and RidgeLine Roof Rack Towers item # Y34UR
view full answer... - Can Lock Cores Be Installed on SightLine Towers for Yakima CrossbarsYes, the SightLine Towers for Yakima Crossbars # Y64AR can be locked with the Lock Core Kit # Y07204. Yakima changed the design slightly and there are 3 pieces to this tower system (as opposed to the normal 2), with the middle piece being the part that the lock core installs on. This gives you a much cleaner aesthetic while still providing security to your roof rack.
view full answer...
- Yakima Crossbars for 2020 Mazda CX-5I assume since you are asking about crossbars that your 2020 Mazda CX-5 has the factory roof rails which cross bars mount to, and the Yakima # Y00425 fit. You will need the # Y00425 Crossbars, the # Y64AR Towers, and # Y39AR Fit Kit. These cross bars are adjustable and removable, however the silver finish will match your factory roof rail and you may decide it looks good enough to leave on all the time. The crossbar's aerodynamic shape creates less wind noise than traditional bars. These...
view full answer... - Kayak Carrier Recommendation for Hobie Mirage Compass Fishing KayakSince your Hobie Mirage Compass fishing kayak weighs 87 lbs you're either going to have to use a post-style carrier like the Yakima BigStack # Y04041 or use 2 sets of a J-Style carrier like the etrailer J-Style Kayak Carrier # e98878. I recommend going with 2 of the J-Styles simply because it will be easier to load an individual kayak on each one, especially with your heavier kayak. If you don't already have a roof rack then I recommend using a Yakima CoreBar roof rack. The correct parts...
view full answer... - Recommended Roof Rack for a 2023 GMC Yukon XLTo add a roof rack to your 2023 GMC Yukon XL, you will want the roof rack by Yakima which includes the following parts: Yakima JetStream Crossbars - Aluminum - 60" Long - Qty 2 item # Y00426 Black or item # Y00429 in Silver SightLine Towers for Yakima Crossbars - Flush Side Rails - Qty 4 item # Y64AR SightClip Fit Kit for Yakima SightLine and RidgeLine Roof Rack Towers item # Y44UV I have attached a couple of pictures below that will show you what this roof rack looks like and how to...
view full answer... - Yakima HD Roof Rack and LockNLoad Fitment on a 2021 GMC Yukon AT4The parts you need to build a Yakima HD roof rack kit for the flush rails on your 2021 GMC Yukon AT4 includes the following parts: 60" HD Crossbars - # Y01157 HD Bar SL Adapter - # Y03541 SightLine Towers - # Y64AR SightClip Fit Kit - # Y44UV Lock Core Kit - # Y07204 (optional) This will work great with the Yakima LockNLoad Platform Rack for Crossbars # Y45UV, but we still need to talk about the weight ratings as you do bring up a great point. The Yakima HD bars are actually rated for...
view full answer... - Yakima Round Bar Roof Rack for 2023 Chevy TahoeI checked with Yakima and their 58 inch round bar roof rack part numbers # Y00409, # Y00145, # Y03536, # Y44UV is a fit for your 2023 Chevy Tahoe with he factory rack so this would give you what you are looking for.
view full answer... - Parts Needed to Add a Yakima Jetstream Roof Rack to a 2024 Cadillac Escalade w/ Roof Rails I would be happy to! To install a Yakima roof rack to the rails on your 2024 Cadillac Escalade you will need the following parts: Yakima JetStream Crossbars - Aluminum - Black - 60" Long - Qty 2 item # Y00426 SightLine Towers for Yakima Crossbars - Flush Side Rails - Qty 4 item # Y64AR SightClip Fit Kit for Yakima SightLine and RidgeLine Roof Rack Towers item # Y44UV This aero bar roof rack system has a 165 lbs capacity. I recommend adding the Yakima Same Key System item # Y07204 to...
view full answer... - Recommended Roof Rack for a 2022 GMC Yukon XLYes, we do. The best roof rack for your 2022 GMC Yukon XL is going to be the roof rack by Yakima and it includes the following parts: Yakima JetStream Crossbars - Aluminum - Black - 60" Long - Qty 2 item # Y00426 SightLine Towers for Yakima Crossbars - Flush Side Rails - Qty 4 item # Y64AR SightClip Fit Kit for Yakima SightLine and RidgeLine Roof Rack Towers item # Y44UV This roof rack will attach directly to your Yukon's flush side rails. It has a 165 lbs capacity. I have linked an...
view full answer...
- Will Rhino-Rack Bars Transfer to 2023 Cadillac Escalade For Roof RackRoof rack parts from different manufacturers do not mix and match so the T-slot sizing from your Ford F-150's Rhino-Rack # RRVA180B-RRRLT600 crossbars won't work for your 2023 Cadillac Escalade. If you wanted to put a roof rack on your Escalade you could do so with a Yakima rack consisting of parts # Y00426, # Y64AR, and # Y44UV. Conversely, if you wanted to switch to Yakima HD bars for your 2016 Ford F-150 with a Retrax XR tonneau cover you can still do so but you'd need a new system...
view full answer... - Platform Roof Rack Available For a 2022 GMC Yukon XL DenaliRyan, currently I do not see that Rhino-Rack has any options for your 2022 GMC Yukon XL Denali. We do have the Yakima HD Crossbars # Y01157, Towers # Y64AR and Fit Kit # Y44UV which would allow you to use the LockNLoad Platform Rack # Y45UV.
view full answer... - Crossbars That Will Fit Both A 2023 Chevy Tahoe And An ARE Camper ShellHello Dusty, thanks for reaching out. I do have a solution for you, but Rhino Rack currently does not offer a roof rack fit for a 2023 Chevy Tahoe. Yakima, on the other hand, does offer a fit for both your Tahoe and your ARE camper shell. You can use their 60" JetStream Aero Bars for both. Here is what you will need for your Tahoe: - Yakima SightLine Roof Rack for Flush Rails - JetStream Crossbars - Aluminum - Black - Qty 2 # Y89KB Then here is what you will need for the ARE shell: -...
view full answer...
Do you have a question about this Roof Rack?
Info for this part was:
Video Edited:
Chris R
Edited by:
Daron K
Written by:
Alex H
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.