What Parts do I Need to Mount Yakima JetStream Crossbars to the Yakima 54" HD Tracks # Y64MR?

Question

Question:

I have the Yakima JetStream crossbars - 60" Y00426 and am looking to attach them to my camper shell with the Yakima 54" HD Tracks for Roof Racks, OverHaul HD, and OutPost HD. Can I still do this?

asked by: Rene

0

Expert Reply:

Yes! If you have the Yakima JetStream Crossbars # Y00426 already, you can use the Yakima 54" HD Tracks for Roof Racks, OverHaul HD, and OutPost HD # Y64MR to use your crossbars. Here are the additional parts you need to make it happen:

- x2 Landing Pad 26 for Yakima SkyLine Towers - Qty 2 # Y75ZR
- x4 Replacement SkyLine Tower for Yakima Crossbars - Qty 1 # 8880614

With these components, you will be able to use your JetStream crossbars on the tracks.

expert reply by: Bob C

0

Answer 1

To install crossbars on the Yakima 72" HD Tracks for Roof Racks #Y84MR you need 2 of the Landing Pad 26 #Y75ZR, the SkyLine Towers #Y53TR, and then your choice of Yakima crossbars. I recommend using the JetStream crossbars like the…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 4

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 5

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

There are a couple of differences between the two. The JetStream bars like #Y00425 are made of extruded aluminum while the CoreBars such as the #Y00421 you've looked at are constructed of galvanized steel. As you've mentioned, the…

view full answer...

Answer 8

Hey Alec, For your 2016 Ford Fusion I recommend the recommend a roof rack from Inno: Inno Aero Crossbars #INXB138-145 Inno Through Feet for Aero Crossbars #INXS250 Custom Fit Kit for Inno XS200, XS250, and INSU-K5 Roof Rack Feet #INK860 As with any…

view full answer...

Answer 9

You can replace the Lippert Rhino pin box on your Brinkley 5th wheel. The right one though is going to depend on the pin weight of your trailer. Here are the options that will work to replace the Lippert Rhino: - Pin Weight of 1,500 lbs - 3,500…

view full answer...