Valterra RV Sewer Heel Inlet - 90-Degree - 3" Lug x 3" Rotating Flange x 2" Hub

Video Transcript for Valterra RV Sewer - Connectors and Fittings - T1030 Review

Today we're going to be taking a look at the Valtera RV sewer heel inlet with a one-quarter bend. This unit's made from a durable plastic construction. The fitting's going to get installed in an RV sewer drain system. It can bind two pipes to one outlet. This point right here is going to feature a rotating flange. This would get connected to a 3" valve.

The metal hole separation on that flange measuring center on center. That looks to be 3-3/4" apart. It's going to be the same separation measurement between each hole on center. The rotating flange is going to lie at a position the valve handle, the location that works best for your application, so that is a really neat feature to have. This point right here is going to be a 2" hub connection. That's going to have an internal diameter of right on 2-3/8".

This end's going to have the 3" bay nut fitting with the four pin design. That will accept standard 3" bay nut style fittings both 2-hook and 4-hook designs. That's going to give us an outer diameter measurement right on 3-1/2". It's going to have the connection pin right here that allows you to easily install a cap with a tether strap. That's going to do it for today's look at the Valtera RV sewer heel inlet with a one-quarter bend..