Valterra DWV Flush Bushing - 1-1/2" Hub x 2" Spigot

Video Transcript for Review of Valterra RV Sewer Hose Fittings - ABS Flush Bushing - D50-2906

Hi there, I'm Michael with etrailer.com. Today, we're gonna take a quick look at this Valterra DWV adapter. This is a sturdy ABS plastic flush bushing that is designed to fit flush into the fitting that it connects to. This is going to have an overall height of about one and one 16th of an inch. Our overall outer diameter is going to be about two and three eights of an inch. Our wider internal diameter there is just shy of two inches.

We call it one and seven eights of an inch. And then our smaller internal diameter is right about one and five eights of an inch. This does meet the international association of plumbing and mechanical officials standards that you see on the screen there. So you can trust it is gonna hold up well, do a good job for you. Would recommend if you are needing to install this to pick up some ABS solvent cement we've got several options available here at etrailer.com, including the one that you see on the screen there so that'll allow you to get this installed properly.

Make sure you have a nice firm fitting. So that completes our look for today. Again, I'm Michael with etrailer.com. Thanks for watching..