Empire Faucets Hybrid RV Bar Faucet - Dual Teacup Handle - Brushed Nickel

Video Transcript for Review of Empire Faucets RV Faucets - Brushed Nickel Dual Teacup Handle RV Bar Faucet - EM73FR

Hi, everybody, Andy here with etrailer.com. And today we're taking a look at this Empire Faucets brushed nickel, dual teacup handle RV bar faucet. Now, this faucet is going to let you update your bar or your prep faucet in your RV or Camper. This is constructed out of a non-metallic ABS plastic. It's gonna be very durable and sturdy, and it features this brushed nickel finish with these two teacup handles and the handles are a quarter-turn cartridge stems. That's gonna enable the faucet to fully turn on and off.

Now, the washer less design reduces friction and daily wear for a long-lasting durability. And this gooseneck spout rotates on this rectangular base and that spout is a tight fit; so just be aware of that. And the shank inlets have these standard NPSM connections. And as you can see, it includes this duck plate. And two mounting nuts are also included.

So it's gonna be an easy installation. And this is going to be ADA compliant as well. And let me pull out my ruler here and give you some overall measurements. Now, this base is going to be longer at the back than in the front, the base kind of tapers towards the front. So let me go ahead and measure the rear side there for ya.

It looks like overall the backside of that base is gonna be sitting right at six inches. And then looking at the front, the overall length there is gonna be sitting right at about 5 5/8 inches long in the front and the overall depth here, is gonna be sitting right at, probably about two inches, maybe two, line that up a little bit better, maybe close to 2 1/8 inches in depth. And then overall, it's gonna be, once you have this installed, it's gonna be right at one inch deep. Just that base. Now the handles across are sitting right at 9 1/2 inches.

And the spout from center. So I'm gonna be measuring this from the center stem of the spout to the front. We're gonna be sitting right at four inches. Then the distance between the shank inlets are gonna be right at four inches. I think I forgot to mention the overall height, once you have this installed. We're gonna be sitting from the surface that this is mounted at, mounted on, we're gonna be sitting right at about 7 3/8 inches tall overall, from the surface that is gonna be mounted on. Now, the flow rate for this faucet is gonna be two gallons. And brushed nickel is my favorite finish. It's not going to pick up fingerprints or smudges, but if you're interested in the chrome finish, you can find that on our website, it's item number EM46FR. Well, that's gonna conclude our look today at this faucet. Again, my name is Andy. Thank you for joining me..