RV Cabinet Drawer Locks - Qty 2

Video Transcript for Review of JR Products RV Kitchen - Cabinet Drawer Stopper - 37271005

Ellen: Hey everyone. I'm Ellen here @etrailer.com and we're going to be taking a quick look at the RV cabinet drawer latch. This helps prevent your cabinet drawer from coming all the way out, so it prevents you from pulling on that drawer and it's slamming down and all your stuff is all over the floor. It gives you that stopper to let that it's all the way out, so you don't dump all your stuff. Just these little plastic pieces comes with the mounting hardware to get them attached to your drawer and the cabinet, so pretty easy to get in place and should prevent a lot of the headache. We'll have this little angled kind of wedge portion.

That's going to go on the cabinet and then this little guy would attached to your drawer. This wedge will face towards the back of the drawer and then this guy will move out. Oh whoops! It's going to move out and lock into place like that.The triangles pointing towards the back of the drawer. Comes with several screws. Looks we get about eight screws to get that installed.

There's no hole drilled out for this little portion, so you can either glue it in place or drill out a little hole or use one of the screws to start a hole, to attach it to that drawer. As far as size, the longer piece measures about two inches by three quarter, and it's about five, 16, seven inch tall. The other piece, it's about three, quarter by 108th and about three-eighths of an inch tall. So I hope that gives you a good idea of the size and scale of these little guys. But again, should be an easy way to prevent all your stuff from coming out of those drawers.

If you happen to pull them out too far, they do have a limited lifetime warranty. They are made in the USA and that's going to do it for me. I hope this video has been helpful. Thanks for watching..