Camco Propane Fitting - ACME NUT x 1/4" Male NPT - 200,000 Btu/Hr - Green

See what our Experts say about this Camco Propane Fittings

• Troubleshooting Connection Between A 2-Stage Regular And 20lb Propane Tank
  Typically most 2-stage regulators like the # CAM59323 will have a 1/4" NPT inlet connection which would allow you to connect a POL fitting like # 37207-30085 to connect to the inner threads of the 20lb tank. If this is what you have and you're still having issues with the threads not gripping it could be that the threads on either the tank or the fitting are stripped. You can combat this by taking off the POL fitting and using a type-1 fitting like the # CAM59923 which will thread into...
  view full answer...
• Connecting A GSI Outdoors Selkirk 540 Camp Stove To A Quick Disconnect Fitting
  To connect your GSI Outdoors Selkirk 540 Camp Stove # GSI53RV to a quick disconnect fitting you would simply need the MB Sturgis Quick Disconnect Propane Hose for Small Appliance # 100476-72-MBS. The 1"- 20 fitting on the end of this hose will screw onto the regulator that comes with your stove and the male quick disconnect fitting will attach to a female quick disconnect on your propane source. You can add female quick disconnect to a propane tank by attaching the Camco Propane Fitting...
  view full answer...
• Supplying Propane to a 150,000 BTU Commercial Deep Fryer
  For starters, we carry propane accessories for camping equipment and small appliances, not commercial duty deep fryers so we may not have the exact fittings/advice you need. However, I can give fittings/advice based on my experience with the above. If the deep fryer you are using has a built-in regulator then an additional one at the tank would only cause problems because it further reduces the water columns to a point that the deep fryer would not be able to function. Therefore, I don't...
  view full answer...
  
• Troubleshooting Propane Supply Problem with Horizontal Tank of 2008 NorthStar Pop Up Camper
  It does sound like the pigtail is the issue. They often have a backflow preventer on them and it sounds like yours is malfunctioning. I recommend using the Propane Hose with Back Check - Type 1 x 1/4" Male NPT - 20" # 37207-30865. The tank orientation can absolutely be an issue as vertical tanks should never be used horizontally. There are horizontal tanks that should be utilized for your application. If you are using a vertical tank in a horizontal position this could be the issue...
  view full answer...
• What Is the Difference Between the Green and Black Camco Propane Fittings
  The difference between the Camco Propane Fitting - 200,000 Btu/hr - Green # CAM59923 and the Camco Propane Fitting - 70,000 Btu/hr - Black # CAM59933 is the Btu/hr rating. Based on my research, the Btu/hr needed is determined by the component(s) using the propane, such as a stove, oven, or water heater. With your smaller pop-up camper, I think you should be fine to use the #CAM59933 rated at 70,000 Btu/hr. You will want to double check the Btu ratings on you trailer's appliances that...
  view full answer...
• Comparing Colors of ACME Type 1 Propane Connectors for Function
  There are differences that the colors reference for the Type 1 Propane connectors based on the spring tension and flow rate. The light green connectors are rated for Rated for 200,000 Btu per hour. The black are rated for 70,000-100,000 Btu per hour. The dark green are rated for 450,000-500,000 Btu per hour. The Red connector is the strongest spring and is often used for high pressure adapters and T-fittings. Here are some options of each: Dark Green # 204052-MBS Black # 204024-MBS Light...
  view full answer...
• Difference Between The Colors of ACME Type 1 Propane Connectors
  There are differences that the colors reference for the Type 1 Propane connectors based on the spring tension and flow rate. The light green connectors are rated for Rated for 200,000 Btu per hour. The black are rated for 70,000-100,000 Btu per hour. The dark green are rated for 450,000-500,000 Btu per hour. The Red connector is the strongest spring and is often used for high pressure adapters and T-fittings. Here are some options of each: Dark Green # 204052-MBS Black # 204024-MBS Light...
  view full answer...
• Can I Use Green Propane Fitting on Red Propane Regulator MB STURGIS
  No, propane regulators that take red fittings are high pressure regulators so most green fittings are not going to be rated for use on a high pressure regulator. For example some high pressure regulators satisfy BTU ratings over 1 million BTU/hr and our Camco green propane fitting part # CAM59923 is rated for 200,000 BTU/hr. We do not carry red fittings at this time.
  view full answer...

Do you have a question about this Propane Fitting?