20K Pintle Hitch. Pintle hook can be bolted to a pintle hitch mount or directly to a reinforced utility truck bumper.
Features:
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to take a look at the TowReady pintle hook, number 63014. This pintle hook can be bolted to a pintle hitch mount or directly to a reinforced utility truck bumper. It has a gross towing weight capacity of 20,000 lbs., and a tongue weight capacity of 4,000 lbs. As you can see, the mounting hardware is included. It has four mounting holes, as you can see here. And we'll do a quick measure.
From center-to-center side-to-side is 3-3/8", and center-to-center top-to-bottom is 1-3/4". The holes themselves are 17/32" in diameter. The way this works is, to open this up to attach to a lunette ring, you will unhook the clip and pop that out. As you can see, the pin and clip are attached to the product with a lightweight chain. You will lift the lever here, and that opens that up.
And then you will back up into the trailer and the lunette ring will fit right on there. You will then close that end for additional security. You will put the pin and clip back in there, and it fits in like that. Pop that in and then the lever is going to stay shut. It will not open up while you're travelling.
To show you how this would work with the pintle mount, we have our 2" receiver demonstrator here. As you can see, we have our DrawTite pintle hook mount. That is number 63057. It is sold separately. It fits a 2" receiver, like this one.
And then you would use the mounting hardware to bolt that in however you need. This is in the drop position. However you need your drop or rise is the way you would put your pintle mount in there, and again you would just bolt that however you needed. That should just about do it for our TowReady pintle hook, number 63014.
Average Customer Rating: 4.8 out of 5 stars (179 Customer Reviews)
20K Pintle Hitch. Pintle hook can be bolted to a pintle hitch mount or directly to a reinforced utility truck bumper.I needed a new pintle to haul my tractor. This one is perfect and heavy duty.
Pintle hook was exactly as shown. Latching mechanism is tight with minimal free play, and the safety pin is heavier grade that other pintle hooks I"ve used.
Great value, the shipping was fast, 0 complaints. I recommend etrailer for all your towing needs.
Product seemed well built, but the black paint was barely on it, looks like the pintle was sprayed after it was together so that none of the areas that are covered when it is closed were painted at all. I'm a little dissapointed with this facet. but otherwise it seemed to be in good condition.
I've had no problems so far. Hooks and unhooks easily, a good strong product. I've used it for a year with a Big Tex tandem trailer, usually pulling 15000 lbs total.
My previous pintle hitch broke on a trip down to Baja, MX. The hitch purchased from etrailer is much stronger and weathered the same trip with no problems.
Worked great with the drop hitch.
Product as described
Really fast shipping.
Had them on my door step in less than three days.
Thanks so much
Thanks for another good product. We needed a reliable pentle hitch for the job and a decided to buy one with a higher weight rating that we needed for safety reasons. Turned out to be just what we were looking for, safe and strong! The video was a big help in deciding this was the right product. Thanks.
Fast shipping. Nice product. Bolted to my b&w Pintle mount plate and hooked up to a 15k trailer. No issues
Used this to haul my JLG lift and equipment trailer with a total weight of 18000 #....worked great, no problems....thanks
Heavy duty with matchibg hardware. Once mounted, I used this pintle hook to pull a trailer and cargo weighing 12,000 pounds.
Products as described. quick shipping and very well packaged for heavy shipping. Definitely a go-to source for trailer parts!
Just installed it this morning. If you order this for the Toyota LandCruiser FJ-80, plan on buying two bolts that don't come with the kit. They just screw in the pre threaded holes. No biggy. About six bucks. Otherwise, good so far. Installation is easy. I recommend for now.
The customer service I received was wonderful. We have not used the product yet, but it was received exactly when it was supposed to show up with all the correct parts in the box. I plan on using etrailer for other purchases as well.
I' like this Pintle Hitch works great for me.
Great Product !!!
Thank You .
John
Great to feel that when I put this baby on that It does the job Great! I've got the Best from the Best! thank e..!
Had the product I needed. Fast delivery.. Had made purchases in the past and will keep buying from..... thanks etrailer... great job !!!!
QUALITY PRODUCT AT A REASONABLE PRICE. THIS WAS MY FIRST PURCHASE FROM eTRAILER....IT WILL NOT BE MY LAST....
Good quality
Easy installation
Mounted up perfectly to my new receiver. Everything included for install and also very easy to install.
Very happy with hitch and shipping.
Second Hitch ordered. Much faster shipping time than the first.
Ordered my part and it was at my doorstep in no time!
Worked great with the drop hitch.
Product as described
Wow! Delivery on time, actually before i expected . Very smooth in all regards. thanks etrailer.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.