Summer Starts Here - Save up to 70%
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
These premium mud flaps are easy to install and digitally designed to fit your car or truck. Protect your vehicle and your trailer from road debris. Flaps are constructed of durable thermoplastic resin.
Features:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi, everyone. Aiden here with etrailer.com. Today, we're taking a look at and showing you how to install these Weathertech No-Drill Mud Flaps on our 2022 Ram 1500. We've got them on the rear in the set as well as on the front of the vehicle. You can get these as just the front or just the rear, or you can get the complete kit to outfit your entire vehicle for a nice custom fit. Let's check them out.
Now you can really see that custom fit well from the back. You can see this line matches and contours around what's already existing on the vehicle here. Now if yours is a little bit different than this, don't worry. There's three different kits that are custom fit for the Ram. So it's just a matter of what trim you have and which one's going to match your truck.
We'll touch on that a little bit more in the install though, so stay tuned. Each one uses existing factory holes to attach. So there's no drilling involved. And you've got the RH or LH to determine whether it's a passenger or driver's side. So they're really easy to get installed.
It's gonna be a thermal plastic construction. It's nice and durable, and it's gonna keep your vehicle protected from dirt and debris from kicking up or maybe even a trailer behind you or even another car. And like I said, the install is really straightforward, no drilling required, and it uses factory holes. Let's check out that process now. Whether you went with the kit for the front and back or just the front or just the back, install process is gonna be pretty much the exact same.
You also wanna make sure you pick up the proper pair. There are a couple of different fits depending on our trim level. So for ours today, we're using this one because it matches up with what's here on the factory. You can see, slotting it up, everything aligns with the factory holes. And just to show you a bit of the other options kind of side by side, you can see how these cutouts differ from one another. So before you get these, just go and check what's on your truck already, see what lines up to these different fits, and make sure you pick up the right pair. So we have a plastic fastener we need to remove first that we can just use a trim removal tool. And then we've got some screws, one, two and three up in the wheel well that we'll use a 5/16th socket to remove. Now when you're removing these, be careful because you do want to reuse them later when we install the mud flap. Now as we remove this last screw, this portion may want to kind of fall off. It's gonna hold itself in place because of one other fastener, but just remember, you need to keep this in place because that does fit and contour around this piece for the mud flap. Once all those fasteners are removed though we can get things lined up. And I'm gonna start by securing it loosely with a screw in the top hole, just kind of hand tight to hold everything in place. And then I can do my plastic fastener in the very last hole towards the inside here. Get that secured in. Then I'm gonna fully tighten this top screw putting some pressure on the mud flap to keep it aligned properly. And then we can go back through and tighten up all the other screws. Once everything is firmly in place and tightened down you can do the same thing for the driver's side. And then if you've got the full kit, you can start on the rear. And for the rear, the only thing that's different is you don't have that plastic fastener. When we line it up, we've just got these three holes that align with the three screws that we're removed and reinstalled. And that was our look at the Weathertech No-Drill Mud Flaps on our 2022 Ram 1500..
Average Customer Rating: 4.8 out of 5 stars (1383 Customer Reviews)
These premium mud flaps are easy to install and digitally designed to fit your car or truck. Protect your vehicle and your trailer from road debris. Flaps are constructed of durable thermoplastic resin.Delivery was quick. The mudflaps were very easy to install it took me about 15 minutes. Extremely happy with the way they look and no more rocks and debris flying up from my tires. Definitely recommend.
It is rainy in this part of Georgia today. Driving into he rain the mud flaps put out a bit of noise as water hits them. Enough to let you know they are there, not bad. Work well to protect the truck and most of the time don’t even think about them. The way it should be
Harold
9/11/2021
They have been on a year now and they are working great. They have held up well. Would buy again.
Very well made product and easy install.
Just like the description says...easy install, no drill, digital fit. Looks like they came with the truck. Highly recommend.
Did not fit well on the 2022 Dodge Ram 3500. The rear flaps did not quite fit the OEM fender flares on the vehicle. Too tight - not enough clearance to sit nicely against the flares. There was also no hole for the trim fastener so had to drill a 1/4" hole for little plastic fastener - not a big deal. Hoping the front ones fit better, but they were worse. Same story - the "digital fit" flaps did not fit the OEM fender flares. Tried a heat gun to hopefully warm the flap and maybe get them to fit together better, but couldn't quite get it. I'll need to get some longer fasteners, otherwise one bolt and the little plastic tab are all thats holding it on. Maybe if the weather warms a bit...? Def not as advertised.
Look great! Look OEM. Wish all the hardware was black. And in the front the two screws you pull out both sides, trash go get something a little longer and more girth. etrailer was great the arrived earlier then expected.
Fantastic product. Very easy installation. High quality. Very fast delivery! Etrailer is the best as always!
holes did not line up with pre existing holes on car
for installation. Very hard
to install. will NOT buy weathertec again
These mud flaps are great! Good Instructions and install went quickly. They look really good and should perform well, protecting the rocker panels and the side steps from mud and stones. Very pricey but good quality. Front Pair.
Took a little effort to get it to match up with the plastic wheel well fender flares but once I did I have not had any issues. Looks somewhat subtle but is pretty effective at stopping thrown debris onto the paint.
Great service item was shipped and received quickly. Mud flaps were easy to install.
For someone who is "old school" and reluctant to install plastic onto a machine, I'm impressed with the ease of installation and durability so far. I've put about 7500 miles on them without an issue. And thanks to Etrailer for carrying great products and providing great info to consumers. You folks have a great Business model!
I was apprehensive about buying these as the weather tech company said they would not fit. My vehicle has power running boards and 22” wheels..I researched forums and took a chance. They fit…no problem. See attached photos and video.
Thanks
Great product, easy to install, I didn't find the instructions, but was easy to figure out. I would recommend this product
This is a good investment. First, etrailer is a great place to get what you need for supplies! The weathertech mud flaps are a great addition to a raised F-250 with larger tires that pulls. This will provide the rest of the protection I need as well as cut down on debris that the tires throw up at other cars/trucks. Very easy to install and if I want to remove them then I have all the pieces necessary except for the push grommets which I can get anywhere. I think I will leave them on for a while....not bad looking either.
I ordered Weather Tech mud flaps for my GMC Sierra 1500. The front flaps were easy to install by using existing fasteners installed on the truck by GMC. The rear flaps were slightly more challenging requiring the placement of clamps (integral to the flaps) on the rear fender. The entire installation of all flaps required about 45 minutes. they look great and they will protect my fenders from being damaged by road debris.
East install on 2023 Thor Compass 23te Motorhome. Fit perfectly. Place some tape on a open end wrench to hole the nut on and you are good to go.
Weather tech always fits and looks good
Good quality. Arrived quickly
Easy to install.
Do you have a question about this Mud Flap?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Debra
7/22/2021
It’s been a year and still looks great! Very happy