Thule TracRac SR Sliding Truck Bed Ladder Rack - 1,250 lbs
(137 reviews)
Price: $1,299.90
Thule TracRac SR Sliding Truck Bed Ladder Rack - 1,250 lbs
Item # TH43003XT-784
Our Price: $1,299.90
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
- All Info
- Reviews (137)
- Q & A (0)
- Photos
Thule Ladder Racks - TH43003XT-784
- Truck Bed
- Sliding Rack
- Thule
- No-Drill Application
- Over the Bed
- Work and Recreation
- Aluminum
- Fixed Height
TracRac provides the ultimate in versatility with this sliding ladder rack. Rack adjusts along the length of your truck bed and easily removes from the T-track base rails. Durable aluminum is lightweight and rustproof. Multiple tie-downs included.
Features:
- Adjustable ladder rack slides in unique, T-track base rails along the full length of your vehicle's bed
- Perfect for long loads, short loads, and everything in between
- Integrated, quick-release clamping knobs can be loosened to move rack, tightened to secure it in place
- Rack can be removed from track quickly and easily
- Aerodynamic design reduces drag and wind noise
- Elliptical crossbars are streamlined to minimize wind resistance
- Airfoil trip strips prevent air from whistling through slots
- 6000-Series aluminum construction is strong and durable
- Lightweight material won't detract from load rating
- Internal web structure of crossbars increases strength and rigidity
- Dual-stage powder coat finish adds extra rust protection
- E-coat is followed by a clear coat for improved resistance to scratches
- 4 Heavy-duty, aluminum load stops included - keep ladders, lumber, and other cargo in place
- Mount quickly and easily in top slots of crossbars
- Slide within slots to adjust
- Lock in place with simple twist of a knob
- 4 Side cleats attach to uprights for additional tie-down options
- No-drill installation - mounts in stake pockets
- Wide base on either side of each upright provides superior stability - no need for additional bracing
- Made in the USA
Specs:
- Carrying capacity: 1,250 lbs
- Crossbar length: 69-1/2"
- Rack height (with base rails): 28-7/8"
- Limited lifetime warranty
TracRac Base Rails
The TracRac base rails provide the foundation for this unique, customizable system. No-drill, stake-pocket installation yields securely mounted rails that sit atop your factory side rails. Each rail has 2 tracks for maximum adjustability.
Because the rack section at the front of your truck bed mounts to a different T-track than the one in the rear, the sections can be moved so that they are right next to each other. The result is unobstructed access to your truck bed and improved aerodynamics when you are not using the rack.
TracRac offers accessories that are designed to mount in these tracks. Base rail tie-downs (TA25100 - sold separately) give you additional cargo-management options. These rustproof, aluminum tie-downs slide across the rails for optimal placement and are secured in place with the turn of a knob.
TracRac Slotted Crossbars
The sturdy aluminum crossbars on all TracRac truck racks feature integrated slots for mounting and easily adjusting accessories, such as the included load stops. These slots appear on both the top and bottom of the bars for the ultimate in mounting versatility. Like the pieces that mount in the base rails, these accessories also have quick-release knobs that let you loosen and tighten them with a mere twist of a knob so that they can be positioned as needed along the bars.
A built-in trip strip at the front of each crossbar shields the slots from wind, maintaining the aerodynamic quality of the bars and preventing that annoying whistle you often find with slotted bars.
Included Tie-Downs
Included with your TracRac SR are 8 tie-down accessories. The 4 load stops are designed to mount in the slots of the crossbars and slide along them for quick, easy adjustment. These bookend-style pieces help to hold ladders and lumber in place on the crossbars. They also have built-in loops for securing tie-down straps.
The 4 cleats attach at any of the provided mounting points along the outsides of the upright supports so that you can tie down items that require additional anchoring or that sit in your truck bed.
Sturdy, Rustproof Construction
The TracRac base rails and rack system, as well as most TracRac accessories, are constructed of durable, lightweight aluminum. Because aluminum is lighter than steel - the material most often used for truck racks - only a small percentage of your truck's cargo capacity is taken up by the rack itself, enabling you to pack on more weight than you could with a steel system.
Even though aluminum is already rustproof in itself, TracRac has taken the extra step of adding a dual powder coat finish to further protect your rack. The electrostatic powder coat (e-coat) clings to the metal surface better than traditional paint finishes for a more durable covering. The second coat is a clear finish that adds extra shine and protection from scuffs and scratches.
43003 Thule Track Rack SR Adjustable Truck Bed Rack
21784 Thule Track Rack SR Base Rails
Replaces TracRac TA21784-03
Installation Details
This Product Fits The Following Vehicles
- 2010 - 2018 Ram 1500 5-1/2 Foot Bed - without RamBox
- 2023 - 2024 Ram 1500 Classic 5-1/2 Foot Bed
- 2019 - 2022 Ram 1500 Classic 5-1/2 Foot Bed - without RamBox
- 2009 - 2014 Dodge Ram Pickup 1500 - 5-1/2 Foot Bed - without RamBox
Customer Reviews
Thule TracRac SR Sliding Truck Bed Ladder Rack - 1,250 lbs - TH43003XT-784
Average Customer Rating: 4.6 out of 5 stars (137 Customer Reviews)
TracRac provides the ultimate in versatility with this sliding ladder rack. Rack adjusts along the length of your truck bed and easily removes from the T-track base rails. Durable aluminum is lightweight and rustproof. Multiple tie-downs included.by: Jim04/18/2024
We've been really happy with the Thule Sliding TracRac, and have made some unusual modifications. We wanted to mount it outside/around a camper shell, so we needed to mount the rails outboard of the truck bed (aluminum "shelves") and figure out how to make the crossbars longer (bought a third crossbar and connected extension sections by making three-holed t-slots nuts and using round aluminum tubes). None of this sanctioned by etrailer or Thule, of course. See photos, which also show an adaptor I made to mount a Thule square bar above the TracRac crossbar to use existing Thule accessories.
by: Tim12/15/2023
Past 20 years I've used Rack-It truck racks. They're solid steel, eventually rust and took two grown men (and an extra set of nuts) to remove them from the truck. Great racks. Just way more than what I need the older I get.
However I wanted something that could easily be removed (by myself), if needed, and was aluminum. I bought these, as well as the extension cantilever, and it serves my needs as a general contractor. It supports my 24' walk plank just fine. The only thing I have to be creative to transport is full length rebar. If I transported rebar all the time, this rack would not be my first choice.
At the time of my purchase, there was not a specific rack for my GMC AT4. So I simply measured the bed of the truck, bought one with a similar measurement, and modified the drilling holes to work.
Lastly, I didn't want a silver color rack on my black truck. While you could get the racks in black. You could not purchase a black cantilever. So I simply had all the pieces powder coated black.
Honestly, I get a lot of compliments on it. Because no one else has one like it.
I'm very happy with it. It's perfect for the occasional ladder, walk plank, or 16' piece of lumber. I've had it mounted for over a year now, with zero problems! I remove it weekly to go through the car wash, and throw it back on in 5 min or less when i get home.
by: Jeff10/04/2023
DO NOT TRUST THE ADVICE GIVEN BY THE SO-CALLED EXPERTS AT ETRAILER. This rack WILL NOT fit the Carbon Pro Bed...I was told by 2 different "experts" that this rack would fit my 2023 Sierra w/the Carbon Pro Bed, since this rack mounted to the stakebed pockets and not to the underside of the bedrail. After receiving my order, I prepared to install the rails and cutout the front stakebed pocket covers which is required to do the install (also indicated by Kevin C. from ETrailer). As soon as I got to step 3 of the rail install instructions, I knew there was a problem. The instructions indicated there was a hole on the inside of the bed to secure the rear stakebed pocket adapter to. There is no hole or any other type of access to any of the stakebed pockets on the Carbon Pro Bed. So, now I have altered bedrails and have a rack that does not fit. It is completely irresponsible of the "experts" at Etrailer to provide information or direction that is not true or hasn't been confirmed.
by: Thomas03/14/2024
Great product, light weight , well built.
Customer service is very responsive.
have a Ford lighting so wanted a light truck rack.
easily removal to save on range/ milage.Made in the USA.
by: BurningDaylight03/17/2023
Just installed this last night sobs true rating is hard to do. With that said it is definitely good quality very tight with no wobble! Hope it works like I want with removal for trips and going through the car wash. Keeps the truck looking pretty sharp compared to the traditional ladder racks!!
by: Harry W04/13/2022
etrailer.com is an outstanding company. I purchased a Thule system in January. Due to logistics (my fault) I tried to install the system in April. Three of the attachment arms were incorrect. I contacted Ashley of etrailer, the sales representative who sold me the system, who patiently listened and after receiving the needed photos and explanation, etrailer sent me a replacement system. The new system was installed and the truck is ready to go. Ashley's professionalism, communication skills, product knowledge were excellent. Ashley and etrailers' commitment to solving my issue expeditiously puts etrailer in a class by itself.
by: Teofilo09/16/2023
I received packages with Thule trac rac SR sliding truck bed ladder rack,Iam totally disappointed, parts arrived incomplete,mising:
04 rubber shim
04 rubber block for base rail
04 metal pocket nut
also
04 crossbar tie down
I really want you fix this problem by replacing the missing parts or else I will return everything
by: Eric K09/30/2020
Very heavy duty ladder rack that does not "whistle" while you drive down the road. Easy install overall, and it is very easy to install and remove the racks as needed after the original install. At the time of purchase this was not available for my vehicle with a short 5.5' bed, but with very minor fabrication the rails for longer beds fit perfectly. I have recommended this rack to several people since purchased a year ago.
by: Christian11/24/2021
I did install the Thule TracRac SR. I did it on my own and it went well.
I'm really pleased with it.
As for the photo, I will send you one, once I've washed my truck.
Can't make a photo with a dirty truck.
I will leave feedback later after some time with the rack.
by: Manny08/27/2022
I searched many ladder racks I was unsatisfied till I found this one. It’s beautiful it’s light and it’s versatile. I have a X-short bed Toyota Tundra platinum with a top. With this ladder rack I was able to keep my topper.
by: Robert B.09/20/2019
Very happy with the rack on my 2018 Silverado. I also have the Back flip hard top bed cover. I am able to open all but the very last position. I might still be able to adjust the rails and to get there but it hasn't been an issue. Used it to haul lumber and I made a bicycle rack that works with the racks and the bed cover down. Works great. Was not hard to install.
by: Chris07/20/2015
Couldn't be happier with the Rack, it went together and operates flawlessly. Dealing with e trailer was a snap, I was informed all the way through the buying process of shipping and arrival dates. Will absolutely buy shop again with e trailer.
by: Jeff N07/10/2017
This is a great product and works really well with the Bak RevolverX2 Tonneau cover.
The only reason I didn't give it a 5 was because the base track has about a 3/4" overhang at the rear of the bed rails. Unfortunately the bed rails of the 2016 Tundra Double Cab are not square. As you can see from my photos, the front fits flush while the rear hangs over. Besides that, they are very sturdy and installation was simple.
Knowing what I know now, I would still buy this product again.
by: Darryl C07/14/2023
This is the second trac-rac I have owned and have had one for the past 18 years.
The flexibility it allows is is fantastic. Would not own any other ladder rack
by: Jeremy 05/27/2023
Really nice rack. Exceptional customer service from Sherry S. Was looking for something to rack out my truck but not lose bed cover. The sliding rack is awesome. Can move it forward if bed room needed. Came back and ordered some additional accessories (self retracting ratchets, pads for crossbars, storage bag, tie down loops. Quality is top notch. Seems pricey, but when compared to other racks isn’t really all that bad when you are getting grade A product that has versatility. Also keeps the truck looking pretty nice. If I could give 10 stars I’d do it. Just buy it… and buy it from etrailer. Delivered on time, as advertised.
by: Adam 12/08/2023
Fit perfectly. Was a little concerned that it wouldn't work with my bed cover. But it does and couldn't be happier.
by: Mark WHI09/23/2019
Great product! Packaging could be better for the larger pieces (rub marks). My 2018 Ram 1500 quad cab came with some small challenges that I had to solve myself. No videos or written words available. Basically if your bed rails are covered with a bed liner you need to remove the plastic sleeve in the rear stake pockets. Otherwise you won’t get an equal spacing from one rail to the other. You will also need to use the provided rubber tape with the wedges in order to make the rails level. Otherwise it went together great.
by: Michael 03/29/2024
Works well
by: Scot 11/08/2023
Phillip is a very customer orientated professional who has made my experience a true pleasure. He is very knowledgeable about your products. And knows the difference between models for different trucks and vehicles sizes, including. It would be very beneficial for you to keep an employee like that is well worth having as a sales person.
by: Sammy06/13/2018
Well built product. Easy install. Combined it with a Bakflip F1 Tonneau cover. Minus a few minor things they work well together.
by: Thomas06/08/2020
It was a tight fit with my existing GatorTrax Tonneau Cover but doable. The Bull Ring Pocket Router made cutting of the stake pockets a breeze.
by: Dave 02/15/2023
This Thule Trac Rac with my BAK X4 Revolver is the perfect combo for my needs.
The rack was an easy install on my 2020 F150, solid, quality and finish is premium.
Karen at etrailer went the extra mile,
I am traveling, she made calls and found a location for delivery near my location and took care of every detail. The Rack was shipped the next day and on my truck 6 days later. Another great purchasing experience with etrailer.
by: Joshua 11/17/2021
The Good:
This rack is sturdy and doesn't make a lot of noise. I also like that it's aluminum and I don't have to worry about rust making it look bad or compromising the structural integrity.
The Bad:
It doesn't slide very well. It takes two people and even then it is VERY sticky. It makes sense...aluminum doesn't like to slide well. But I think there is room for improvement for some sort of low friction glides in the rack that last long term. Also, where the ladders sit, the aluminum is getting chewed up a bit.
The Ugly:
Well...It's not ugly. It actually looks nice. :)
Overall:
We also added the cantilever after the fact and that really helps to stabilize longer ladders. While the rack does have a lot of options for tie-downs, they mostly seem to be geared toward ropes or super light duty ratchet straps. We use slightly heavier duty ratchets straps for everything we need them for (1 1/2") and it would be nice to have a better way to hook those up. Not a big deal, just something to improve on.
All in all, this rack is expensive. Understandably so because it's aluminum, but that was a hard pill to swallow. The fact the rack is difficult to slide makes it even harder to swallow...I'm just glad we don't need to slide it that often.
by: Travis05/25/2022
These racks are simple to install and perform as expected. Pros are that they can slide all the way to the cab to get out of the way while not in use. Or can be totally removed if you need to park in a low clearance garage or want to go through the car wash. Cons are they can and will break if you back up against a tree limb or basketball hoop but that’s not really the racks fault now is it. The silver paint will inevitably start to chip off once the cast aluminum starts to oxidize after a few years. Kind of a bummer since otherwise they look nice.
by: Steven 08/19/2023
Very high quality product with excellent customer service. Highly recommend Thule and etrailer!
25
171
Show More Reviews
See what our Experts say about this Thule Ladder Racks
- Ladder Rack and Tonneau Cover Recommendation for 2016 Ram 1500I have a great solution for you, but since you want to use a ladder rack with the tonneau you have to go with Bakflip Revolver and a TracRack SR style ladder rack as this is the only combination we know works well for both the ladder rack and the tonneau. So if you have a 5-1/2 foot bed you'd want the Bak # BAK39207 and TracRac # TH43003XT-784 6-1/2 foot bed # BAK39213 and TracRac # TH43003XT-501 8 foot bed # BAK39214 and TracRac # TH43003XT-000 The reason these ladder racks fit with...
view full answer... - Recommended Ladder Rack For A 2017 Ram 1500 With Tonneau CoverWithout knowing the tonneau cover used on your 2017 Ram 1500 I can't completely confirm the fitment of any ladder racks. That being said, if your tonneau cover mounts to the inner lip of the bedrails and stays inside the bed, leaving the top of the bedrails open you could install a ladder rack that mounts inside the stake pockets like the Thule TracRac SR Sliding Truck Bed Ladder Rack - 1,250lbs # TH43003XT-000 you were looking at. This adjustable ladder rack slides in unique, T-track...
view full answer... - Tonneau Cover Option that is Compatible on a 2016 Ram 1500 with a 5-1/2 Bed and the TracRac SRThe TracRac SR Sliding Truck Bed Ladder Rack # TH43003XT-784 that you referenced is a confirmed fit for your 2016 Ram 1500 with a 5-1/2 foot bed without the RamBox. This is a very popular ladder rack because of how adjustable it is. I do have a great option for a tonneau cover for your 1500, but since the TracRac SR sits slightly over the bed rails on the inside we have yet to find a hard tonneau cover which folds that is compatible with this ladder rack. The great news is that BAK Industries...
view full answer... - Tonneau Cover And Ladder Rack Compatibility On 2017 Ram 1500 With 5-1/2 Foot Bed Without RamBoxFor your 2017 Ram 1500 5-1/2 foot bed without RamBox, there are options for you to have a ladder rack and tonneau cover. I reached out to my contact at Thule, the maker or TracRac and they can confirm a fit with their TracRac SR Sliding Truck Bed Ladder Rack - 1,250 lbs, # TH43003XT-784. The rack has been fitted by customers with the BAK Revolver X2 Hard Tonneau Cover - Roll Up - Aluminum and Vinyl, # BAK39207. I then reached out to my contact at BAK Industries, and although they also...
view full answer... - Sliding Ladder Rack for a 2017 Ram 1500 with 5-1/2 Foot BedThere is a sliding ladder rack that will fit your 2017 Ram 1500 with the 5-1/2 foot bed. It is the TracRac SR model # TH43003XT-784. The base rails in this rack were made short enough to work with the 5-1/2 foot beds. Also the sliding ladder racks like this are just about the only option if you wanted to add a Tonneau cover. But if you do add a Tonneau cover make sure it is one that mounts between the bed sides and not on top of the bed sides. So for example # BAK39207 would be a good...
view full answer... - Roof Cargo Box to Fit Crossbars of Thule TracRac SR Ladder RackThe Thule cargo boxes fit crossbars up to 3-1/2" wide x 1-11/16" tall while the crossbars for the Thule TracRac SR Sliding Truck Bed Ladder Rack # TH43003XT-784, that fits your 2017 Ram 1500 5-1/2' bed, measure 4" wide x 1-1/2" tall. Since this is the case I recommend using the Inno Box 2020 # IN86FR instead because it can be mounted inside the T-Slots of the TracRac crossbars using the Hardware Kit # INBRP12. This is currently (January 2022) the only roof cargo box that has the option...
view full answer... - What is Dynamic Weight Capacity of Thule TracRac SR Sliding Ladder RackThe 1,250 lb capacity of the Thule TracRac SR sliding ladder rack part # TH43003XT-784 that you referenced is actually the dynamic weight capacity which means the weight it can handle while travelling so it has quite a bit of capacity.
view full answer... - Truck Ladder Rack Recommendation for 2010 Dodge Ram 1500 with Tonneau CoverDoes the tonneau cover mount between the bed rails and leave the top of the stake pockets accessible? If so, we have the TracRac options that would work well as they install by attaching to the stake pockets. Part # TH43003XT-784 would be what you need if you have a 5-1/2 foot bed. Part # TH43003XT-501 for if you have a 6 foot bed. Part # TH43003XT-000 for if you have 8 foot bed. If your tonneau covers the tops of the stake pockets we don't have a ladder rack option.
view full answer... - Can Thule TracRac SR Uprights Be Installed on Same Tracks for 2016 Ram 1500 Short BedNormally Thule recommends installing the legs for the TracRac SR # TH43003XT-784 on different tracks so you can move the crossbars closer together but you can install all of the legs on the outer tracks so you can use other pieces for the inner slots, like the Tie-Downs # TH25100, and carry more with the 5-1/2' of your 2016 Ram 1500.
view full answer... - Best Tonneau Cover and Ladder Rack Combo for a 2017 Ram 1500 Laramie with 5-1/2 BedHands-down the best tonneau cover and ladder rack combination for your 2017 Ram 1500 Laramie with the 5-1/2' bed is the BAK Revolver with the Thule TracRac SR. The Revolver comes as the X2 # BAK39207 which has a gloss black finish or the X4s # BAK44ZR which has a matte black finish and then the TracRac SR # TH43003XT-784 has a massive weight rating of 1,250 lbs and can slide along the base rails. Attached are review videos for you to check out.
view full answer... - Sliding Ladder Rack for a 2014 Ram Crew Cab 5-1/2 Foot BedWe do have a sliding ladder rack for your 2014 Ram 1500 with a 5-1/2 foot bed, with the correct part being the following: - Thule TracRac SR Sliding Truck Bed Ladder Rack # TH43003XT-784 Please note this will not work on models with RamBox.
view full answer... - Ladder Rack Recommendation For A 2019 Ram 1500 Classic Short Bed Without Ram BoxesFor your 2019 Ram 1500 Classic, I recommend the Thule TracRac SR Sliding Truck Bed Ladder Rack # TH43003XT-784. This ladder rack has a maximum carrying capacity of 1.250-lbs, is 69-1/2" long, and 28-7/8" tall.
view full answer... - Ladder Rack Compatible With BAKFlip F1 on 2017 Ram 1500 With 5-1/2 Foot BedThe ladder rack for your 2017 Ram 1500 that is compatible with the BAKFlip F1 Tonneau Cover # BAK72207 is from Thule, called the TracRac SR, and is the following part number: - Thule TracRac SR Sliding Truck Bed Ladder Rack # TH43003XT-784
view full answer... - Sliding Ladder Rack Recommendation for 2017 Ram 1500We have Thule TracRac SR ladder racks that fit your 2017 Ram 1500 but none that slide in a factory track system. You'd have to go with a system that includes base rails that the uprights slide in like the part # TH43003XT-501 which is what you'd need if you have a 6-1/2 foot bed, or part # TH43003XT-784 for if you have a 5-1/2 foot bed, or part # TH43003XT-000 for if you have an 8 foot bed.
view full answer... - Will the BAK Revolver X4 Work with the TracRac SR on a 2012 Ram 1500We have not confirmed the BAK Revolver X4 Hard Tonneau Cover to work with the TracRac SR Sliding Truck Bed Ladder Rack part # TH43003XT-784 on your 2012 Ram 1500 with 5-1/2' bed yet. However, according to my contact at BAK the BAK Revolver X4 Hard Tonneau Cover is the exact same tonneau cover as the BAK Revolver X2 Hard Tonneau Cover part # BAK39207 for the exception of the matte finish. Since we have confirmed the BAK Revolver X2 to work with the TracRac SR, it is safe to say that the...
view full answer... - Ladder Rack Recommendation for 2017 Ram 1500 5.5 ft Bed with BAK Industries Revolver X2 TonneauWe have a great ladder rack solution for your 2017 Ram 1500 with a 5-1/2 foot bed. For that you'd want the Thule TracRac SR Sliding Ladder Rack part # TH43003XT-784. This will work great with the Bak Revolver tonneau cover # BAK39207 you have installed in the bed of your truck. Actually your tonneau cover is the only one that can be used with the TracRac so you made a great choice by buying that cover!
view full answer...
- Will the Thule TracRac SR Work with the TruXedo Pro X15 On a 2018 Ram 1500Yes, the TruXedo Pro X15 Soft Tonneau Cover will work with the Thule TracRac SR Sliding Truck Bed Ladder Rack on your 2018 Ram 1500. It will be a tight fit yes but nonetheless still compatible. I have attached the correct part numbers for the Thule TracRac SR below. These will vary by bed size. 5-1/2' Bed - part # TH43003XT-784 6-1/2' Bed - part # TH43003XT-501 8' Bed - part # TH43003XT-000
view full answer... - Recommended Ladder Rack for a 2016 Ram 1500 5-1/2' Bed with BAKFlip MX4 CoverThank you for all of the info! I believe you can add the TS Rails to your cover, but since this system is designed for use with the Elevate Rack System and that is currently being tested (June 2020), there aren't any other rack systems that have been tested and approved so we have to go another route. We do have a few ladder racks that are compatible with the BAKFlip MX4 Hard Tonneau Cover # BAK48207 on your 2016 Ram 1500 5-1/2' bed (no RamBox), but the easiest to remove is going to be...
view full answer... - Ladder Rack Needed to Carry a Canoe with a 2013 Ram 1500 with BAKFlip G2 Tonneau CoverSince the BAKFlip G2 Hard Tonneau Cover, part # BAK26207 or # BAK26203 , mounts inside the bed rails of your 2013 Ram 1500 you definitely can install the TracRac SR! This is one of the best ladder racks out there and will do a great job for hauling your canoe as well as other equipment you may need. As long as your Ram doesn't have the RamBox then you can use part # TH43003XT-784 for a 5-1/2' bed or part # TH43003XT-501 for a 6-1/2' bed. If you are wanting the over-the-cab extension then...
view full answer... - Best Sliding Ladder Rack and Tonneau Cover for 2017 Ram 1500 With 5-1/2 Foot BedWe do have exactly what you need for your 2017 Ram 1500 with a 5-1/2 foot bed - a tonneau cover that works with a sliding ladder rack, with the best combination for your truck being the following: - Thule TracRac SR Sliding Truck Bed Ladder Rack # TH43003XT-784 - BAK Revolver X2 Tonneau Cover # BAK39207 - BAK Revolver X4s Tonneau Cover # BAK44ZR The Revolver will work with this ladder rack because it installs completely inside your bed rails. It is also truly low-profile, sitting flush...
view full answer... - Compatibility of TruXedo Sentry CT and Thule TracRac SR on 2018 Ram 1500 with 5-1/2' BedYes, the Thule TracRac SR # TH43003XT-784 or # TH43003XT-784EX (with the cantilever) is compatible with the TruXedo Sentry CT # TX1545916 on your 2018 Ram 1500 with the 5-1/2' bed (no RamBox). I confirmed this with my contact at TruXedo who said that these products will work together but to be mindful that the material of the cover may be a little tight when rolling it up with this ladder rack installed.
view full answer... - Sliding Ladder Rack and Tonneau Cover that Fits 2016 Ram 1500 5-1/2 ft BedFor your 2016 Ram 1500 Rebel with a 5-1/2 foot bed you'd need to go with a different tonneau setup on your truck to install a Thule TracRac sliding ladder rack since your Switchblade covers the stake pocket openings. Instead you'd want to go with a Bak Revolver X2 part # BAK39207 which would give you access then you'd be able to install a sliding TracRac like the # TH43003XT-784 and you'd be set.
view full answer... - Will TracRac SR Sliding Truck Bed Ladder Rack Fit with BAK Tonneau Cover on a 2014 Ram 1500The BAKFlip MX4 Tonneau Cover # BAK48207 is designed to work with accessories that are mounted into the stake pockets. And the TracRac SR Sliding Truck Bed Ladder Rack # TH43003XT-784 does install into the truck's stake pockets. So, they will install together; however, we've found that a lot of tonneau covers make contact with the tracks of the SR when trying to open them. The edges of the cover rub against the sides of the tracks damaging one or the other over time. The MX4 # BAK48207,...
view full answer... - Tonneau Cover and Ladder Rack Fit for 2012 Ram 1500Unfortunately, I don't think the Bak Revolver X2 # BAK39207 and the DeeZee Invis-A-Rack, such as # DZ951600, can both be installed on your truck bed at the same time. They both install around the edge of your truck's bed frame. We've found that the Thule TracRac SR sliding ladder rack works well with the Revolver X2. It sits on top of the bed rails instead of inside them. For your 2012 Ram use # TH43003XT-784 for a 5-1/2 foot bed, # TH43003XT-501 for a 6-1/2 foot bed, or # TH43003XT-000...
view full answer...
Do you have a question about this Ladder Rack?
Info for this part was:
Edited by:
Tyler C
Expert Research:
Jameson C
Video Edited:
Dustin K
Video Edited:
Chris R
Written by:
Matthew S
Updated by:
Alex H
Video by:
Ryan G
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.