LED T5 Light Strip with Wiring Harness - 12" to 15" Fixtures - 700 Lumens - Qty 2

Video Transcript for Review of Diamond LED Utility Light - DI94ZR

Jeff: Hello, everybody. This is Jeff at etrailer.com. Today we're going to take a look at these LED light strips with the wiring harness for 12" to 15" T-5 fluorescent fixtures for a quantity of two. Now, these are replacement LED light bulbs which will upgrade or replace your T-5 fluorescent bulbs to provide a nice cool white lighting. These are designed to fit the 12" to 15" lighting fixtures, so they are great for overhead, under cabinet and high bay fixture applications. They are a 12-volt bulb, has many applications on your RV, your trailer, your boat or your vehicle.

They use high output LEDs which make great replacements for the fluorescent lights. These have 18 LEDs per strip. They are rated for up to 50,000 hours and these LEDs are more efficient. They provide brighter light with less power output and there's no bulbs to have to replace or ballast malfunctions.These bulbs are compatible with dimmable fixtures for a nice simple adjustment of your light brightness. They do offer built-in surge protection to safeguard your internal electronics and they're a very simple installation.

On each end here you can see it has the mounting brackets. It comes with the screws for permanent installation. The wiring harness right here has the quick connect plugs on this end here, easily connects to the same power source. Application, again, this is for 12" to 15" lighting fixtures. Just want to put a ruler on this to show you the length of each one is 12".

It is for a quantity of two light strips. The light output is 700 lumens per strip. The bulb type is T-5. The light type is cool white and the color temperature is 5,500 Kelvin. Wattage is 3.6 watts.

Power draw at 12 volts is 0.30 amps, and it does . designed to replace up to a 40 watt halogen bulb.Now what I am going to do, we're going to hook this up to some 12-volt power to show you how bright they are. So we're going to take our wiring harness. It's a two-pin plug. We'll plug them right in here. Okay, now that they're both plugged in, we have a black wire, which is your ground, red, which is your power. So we'll go ahead and hook up our power. There's our power, and make sure this is our ground. Okay, so we've got the lights hooked up. Now what I'm going to do is go ahead and turn on the 12-volt power and you can see with the 12-volt power on, a very bright light. I am going to turn off the overhead lights. There you go.And you can see how bright these are. One of these strips lights up a very large area. And this does include two strips. And again, it's a cool white type light it gives off. Go ahead and turn back on our overhead lights and turn off our power. But that should do it for the review on these LED light strips with the wiring harness for 12" to 15" T-5 fluorescent fixtures, and it's for a quantity of two strips.