6" Locking C-Clamp Pliers
(0 reviews)
Price: $10.55
In Stock
6" Locking C-Clamp Pliers
Item # PTW5100
Retail:$21.13
Our Price: $10.55
You Save: 50%
In Stock
Need help with installation?
Locate installers near me- All Info
- Q & A (0)
- Videos (1)
- Photos
Performance Tool Hand Tools - PTW5100
- C Clamp Pliers
- Pliers
- Performance Tool
Features:
- Performance Tool 6" Locking C Clamp Pliers quickly adjusts to right size before use
- Locks work with squeeze of one hand
- Unlocks easily by squeezing release lever
- Heavy-duty construction
W5100 6" Locking C Clamp Pliers
W5100 6" Locking C-Clamp Pliers
California residents: click here
Video of 6" Locking C-Clamp Pliers
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Review of Performance Tool Hand Tools - 6 Inch Locking C Clamp Pliers - PTW5100
Hi, everybody. Andy here with etrailer.com, and today, we're gonna take a quick look at this six-inch locking C-clamp pliers. Now, this performance tool six-inch locking C-clamp pliers will quickly adjust to the right size before you use it. It locks to work with the squeeze of one hand, and easily unlocks by squeezing the release lever. So, it's gonna be very simple to use, and this is very durable, very rugged. This is made out of a heavy-duty steel, so, I think it's going to last you quite some time.
So if you are in need of locking C-clamp pliers, and this matched the specifications that you're looking for, this would be a good item for you to consider. Well, that's gonna conclude our brief look today. I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me..
0
0
See what our Experts say about this Performance Tool Hand Tools
- Caliper not Fitting Correctly on a HydraStar Disc Brake on a 2018 Jayco PinnacleI called HydraStar on your behalf and they said the most likely problem with the caliper of the HydraStar Disc Brake, part # HSE7K-T1, not lining up correctly is because the piston needs to be reset into the caliper. I also spoke with one of our installation experts, and he believes this may be the problem as well. To reset the caliper, place a brake pad in the piston side and use a c-clamp like part # PTW5100 to seat it to push it in all of the way. If this doesn't solve your problem,...
view full answer... - Comparing Curt and etrailer Trailer Hitch Receivers For a 1985 GMC 1 Ton PickupBoth the Curt # 13028 and our etrailer # e88AR receivers are going to require the same installation. We have our receiver manufactured by Curt so you have the same made in the USA quality with the only difference being the finish used. Our etrailer receiver has a matte black finish versus the gloss black on the Curt. Personally I feel the matte black is a better finish and looks better over time. The installation will require drilling all new holes in your frame. I recommend using 2 Clamps...
view full answer... - How Does The Replacement Lid Lifter Hinge Install? While we do not have a video that shows how you can install/remove the Replacement Lid Lifter Hinge for Thule Cargo Boxes # TH14936 I can go ahead and explain how to remove it / install it. It's much easier than you think. These hinges are just snapped onto a ball joint, so you will just need to apply a fair amount of pressure to snap these on or to remove them. I have gone ahead and attached a image that you can check out which shows a method on how you can install these more easily...
view full answer...
Do you have a question about this Hand Tool?
Info for this part was:
Written by:
Jacob W
Updated by:
Erin H
Installed by:
Andy C
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.