To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Easily attach a variety of accessories to the front of your Chevrolet Silverado with this fully welded, corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.
Features:
Specs:
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
Tech Tip
No drilling required for installation
Average Customer Rating: 4.8 out of 5 stars (36 Customer Reviews)
Easily attach a variety of accessories to the front of your vehicle with this fully welded, corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.It arrived in a timely manner and everything was there. But just like other reviews the packaging was weak and the receiver hitch was able to move around inside the oversize box, but thats was no big deal. Also like other reviews the bolts are too short. Tightened all the way down, the bolt is just a thread short of being flush with the nut. Which is disappointing to know after the reviews stating as such. I thought e-trailer would have rectified that. But it's on, and seems to be strong and good fit.
I have a trailer/boat storage business and use my front hitch often. It has made moving trailers a lot easier! I highly recommend this product!
I wish I had done it sooner! Makes Taking our bicycles a breeze, Kayaks on the back of our RV and the bikes on the front.
Package arrived in a timely manner. All parts were included and packaged well.
Have an 08 Chevy Silverado 2500 HD and instalation was a breeze. Instructions included were good but would suggest watching the vidio on the website also.
Bolted up with no problems in like 20 m inutes
The Curt front mount hitch attached easily, as advertised. We have now been able to travel with our bikes loaded on front and the slide-in camper on back. Plus, it arrived quickly enough to attach and use for our next planned camping adventure!
Sterling
7/17/2018
We think it is a great product and was easy to install. Our friends saw it and we recommended etrailer to them
Heavy duty and heavy, I had it installed by myself (with the help of a floor jack)in less than 30 minutes, love it. Now UPS, the shipper leaves a lot to be desired. Good thing the hitch was built great because the packaging was destroyed.
Glenn W.
5/17/2018
Yes I still think it is a great product, no I dont use it every day but when needed its there.
Great Product!
Fast delivery
I bought this about an year ago for my 2009 Chevy Silverado to push 28 ft trailer. This thing saves my life every time when I need to push my trailer back to the back of the driveway. I have a narrow driveway and long too. In the past I will have to try many times to back in the trailer. Now with the front hitch the back in is much more easier. However I do find one thing that is not expected, the hitch is way too low that I am not able to use my flip folder jack foot, it does not have enough clearance to make it fully stand. I have to get a jack to lift the trailer in order to have the flip folder stand to support the trailer. But for the regular trailer jack is OK.
Curt's front mount hitch reveiver is resonably priced, stoutly made, and finished with what appears to be a solid shiney black powder coating. I especially like the fact that the receiver is positioned just below the front license plate so no modifications are needed to the front fascia, or removal of license plate to utilize. Hitch was shipped in a stout cardboard box, but not much internal padding. This seems to be Curt's standard method, as I also purchased a 34" hitch extension and was packaged similarly. The items are not likely to become damaged in shipping, but a lil more thought and effort could be put into their shipping methods. But for the value and quality you recieve that's a minor issue. Love Curt products!!!
Easy install took about 20 minuets. Good quality with all installation hardware needed included.
Very well built, good fit and finish and very sturdy. Installed in about 1/2-hour. The "square hole spacer" for the carriage bolt had to be fed through the front of the frame rail (past the tow hook) as it was ever so slightly wider than the hole underneath the frame rail where the instructions show it being fed. I agree that the hex bolts could be about 1/4" to 1/2" longer, but once tightened the bolt is flush with the end of the nut. I'm glad I purchased this as now I can use my 12,000 lb. winch (& winch cradle) on both the front and back of my 2007.5 Chevy 2500HD.
This Curt 31109 front hitch went on a 2009 GMC 2500 Sierra crew cab with a Duramax Diesel. Shipping was incredibly fast - just 1 day! The hitch appears well built and nicely finished - and it's made right here in the USA! It fit perfectly and was very easy to install. No trimming of bumper plastic was required. My wife and I are retired and we use this truck to pull a large 5th wheel trailer or carry a truck camper. We will transporting our bicycles on the front hitch. I should have done this earlier.
I have a 2008 Silverado. The Hitch was installed in less than an hour. The pair of bolts that are installed through the frame seem to be slightly short but remember this unit is installed in shear, meaning that the loads applied to this hitch are perpendicular to the bolt, so the nut just needs to hold the bolt in place. You still need to torque to german specs "good n tight" (haha). the bolt will come flush to the nut face. All in all a very simple clean install. Im using this for a Myers Home Plow, which also installed simply.
Install was quick and easy
Bolts that go through frame were 1/4”too short.
Works great!
Craig
2/27/2019
Easy to install and works great
Everything went as lined out in the video. I would of liked to of had longer bolts to be able to use locknuts, but went ahead and used the supplied hardware. But everything went smoothly. The only other thing I could suggest is using a little bit longer plate for the carriage bolt, as the frame on my gmc 2500hd was wide enough for the carriage bolt and metal plate to spin. I was able to get it tight enough for it to quit spinning though and get the 110lbs of torque.
All in all a good product and it fits very well.
Item was as described and installed easily. The bolt that fits thru the frame that holds in the tow hook should be longer in my opinion as I think the bolt should always stick out the nut a certain amount. THe fit was great and the customer suoort is excellent.
Arrived in one piece, although the packaging could have been better. the box should have been fitted better to the hitch as the hitch had too much room to move around in the box with the box being damaged. Box needed tape to secure the holes punched in the side of the box.
Awesome hitch! Great quality and fast shipping! Will buy from this company again! Highly recommend!
Great quality, installation is very easy, cost is good. Definitely happy with this product and the service.
Received on time and able to install with ease after viewing the video, great product.
product looks good but the other reviews that i read the two bolts are to short. I had to buy 5 inch bolts to get more than 3 threads tight. This would be an easy fix for you to do.
Very good product. Fast shipping.
Easy to install works perfect on my gmc to haul small scooter
This hitch was installed by myself in just over one hour. Not too difficult and the video was great. The long bolts in the kit could be about 1/2 in longer. My truck is a 2009 Silverado.
Do you have a question about this Front Receiver Hitch?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Calvin
3/19/2024
Fine, except I wish I would have ordered and installed the one that is higher off the ground. I didnt want to cut a hole in the front so I got the one that installed underneath. Its lower than Id like it to be. Ive bumped the ground a few times.