Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today, we're going to take a look at the Custer quad flash 60 LED permanent mount beacon. Now, this uses 60 bright LEDs. It's a 12 volt, 40 volt, operation. It is a flange mount design, comes with the felt pad when you mount it and the mounting hardware. Dimension on this is going to be 5 inches tall. Diameter is right at 5 inches in diameter.Then, what we're going to do is, is we're going to hook it up to some 12 volt power just to show you the quad flash design of it.
We'll go ahead and turn off the overhead lights. What we'll go ahead and do is we'll hook . It comes two wires to hook up. The black wire for ground, red wire for power. We'll go ahead and hook up our ground.
Go ahead and hook up our power. Now, we'll go ahead and turn off . First, I'm going to turn it on with the lights on just to show you how bright it is. There's now bright the quad flash is. Now, I'm going to go ahead and turn off the overhead lights so you can see with the overhead lights off.
Gives you very bright 60 LEDs. Go ahead and turn back on our overhead lights. That should do it for the review on the Custer quad flash 60 LED permanent mount beacon.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.