Hidden LED Strobe Light Kit w/ In-Line Flashers - Bolt-On - 19 Flash Patterns - Amber - Qty 2

Video Transcript for Buyers Products Emergency Supplies - Warning Lights - 3378891216 Review

Speaker 1: Today we're gonna take a look at the 12 LED Amber Bolt-On Hidden Strobe Lights with In-Line Flashers and a Wiring Harness. Now, this is a Bolt-On Hidden Amber LED Strobe Kit that has these In-Line Flashers. Each one features six high intensity LEDs per strobe pad, and are designed to install inside your vehicle's headlights or taillights. Common use for these lights is on work trucks. Each kit here will contain two light heads, and all the cables with the in-line flash module. They use a corrosion resistant cable, has the weather pack connectors right here, and total length on this is 15 feet.Now, these lights will feature 19 adjustable flash patterns, and they can be synchronized with up to eight strobes for simultaneous or alternating flashing.

It does give you a good detailed instructions on how to hook all your wires up to get those different flash patterns. Now, LEDs that they use on these, they make great replacements for incandescent lights, because they last about 50 times longer. And, they're more efficient because they'll provide brighter light with less power output. And, of course, no bulbs to replace, or no brittle filaments. You can attach this up to eight hidden strobe heads can be combined for synchronized flashing.

Each light head has a black housing, an amber lens with clear LEDs. It includes the installation hardware, the instructions I mentioned. And the connection on the wire you can see is stripped leads to connect to your power and make your connections. Each light uses six LEDs, the wattage is 16 watts, voltage is 12 volts, the amperage is 1.3 amps at 12 volts. The dimension on one of these light heads, the diameter, is right at 1.5".

The depth on the light is 1".So what I'm gonna do now is hook it up to some 12 volt power. And you'll notice you'll have four wires here. A black wire is your ground, and then your red and your white wire will give you two different . The red, if we use it will give you a color one activation, the white will give you a color two activation. And then the yellow you can throw on to attach to either one of those red or whites, and it'll give you synchronization in the different flash patterns.

So what I'm gonna do is try to hook this up and show you the brightness of the lights, and then we'll turn off the lights and show you the different flash patterns. So we'll take our black for the ground, go ahead and hook that up. Take our red for power, we're first gonna hook it up to color one activation, which is the red. And we'll go ahead and turn on the 12 volt power. You can see there's your lights. We'll go ahead and turn off the overhead lights. And you can see that's gonna give you color one activation. Now, if I remove it from the red and go to the white, you can see that's the color two activation. It's a little bit different.And then I had mentioned, if you take this yellow wire, and since I have it hooked up to the white, I'm gonna touch the yellow wire to it, and it'll change. You can see how it changes. And if I move it to the red wire, and then again we hooked it up, you can see it'll change patterns just like that. So the yellow wire is used for changing flash patterns and synchronization. And then we'll go ahead and turn off our overhead power. Turn back on our overhead lights. That should do it for the review on the 12 LED Amber Bolt-On Hidden Strobe Lights with In-Line Flashers and Wiring Harness.