5-1/4" x 2-1/4" Rectangle. Raised strobe light with 4 diodes produces a bright flashing light to alert others to the presence of your vehicle. Durable aluminum housing. Surface mounts - hardware included. 3-Wire design.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today we're takin a look at a four LED strobe light. This rectangular clear LED strobe light has four LEDs and features a single flash pattern. Now it does have that single flash pattern, but it also has a constant on feature as well, which I'll show you a little bit towards the end of the video. The versatile clear strobe light is rated IP67 for water and dust resistance. It's SAE J595 Class 2 rated, has a really nice heavy duty aluminum housing that's very strong, durable, and rust and corrosion resistant and it is a LED system. Now LEDs make great placements for incandescent lights.
They last longer. They burn brighter. They're more efficient. With LEDs, you don't have to worry about replacing bulbs, or worry about brittle filaments. It does come with this black plastic base.It's a surface mount installation, mounting hardware not included, but it does come with a foam mounting gasket.
We're looking at a three wire design so the white wire is our ground wire, black wire is for that constant on, so that's great if used as a marker or running light and then red is our main power for the strobe pattern, or the strobe, the single flash pattern design for the strobe light. When it comes to the dimensions, going edge to edge this direction, we're looking at about five and one quarter. I'm doing the overall measurements with it on the base. Edge shows going this direction as about two and five sixteenths and the overall depth, or overall height is about one and thirteen sixteenths inches. We're gonna go and hook it up to power that way you can see what it looks like with some power running to it and then we'll turn off our overhead light so you can see it in a low light setting.
So I'll show you the constant on first. See you can see where it sends out a a really nice bright consistent signal.Again, four LED design nice bright light output with this unit. Now I'll connect the red, which is our flash pattern. Four diodes, so the multi diode design really helps optimize the overall light output. Voltage is 12-24 volts and the amperage is 0.54 amps at 12 volts.
That's gonna do it for today's look at the four LED strobe light.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.