LED Raised Strobe Light - Surface Mount - Amber LEDs - Clear Lens - 12V/24V

Video Transcript for Buyers Products Emergency Supplies - Warning Lights - 3378891004 Review

Speaker 1: Today we're taking a look at the 4-LED strobe light. This rectangular amber LED strobe light has four LEDs and features a singular quad flash pattern. So it means that it has one flash pattern, and it is a quad flash pattern. The versatile amber strobe light is rated IP67 for water and dust resistance, and SAEJ595 class two rated. Features a nice heavy duty aluminum housing that's very strong, durable, and rust and corrosion resistant. And then the lights sits on a black, plastic base.Now LEDs make great replacements for incandescent lights.

They last longer, they burn brighter and they're much more efficient. With LEDs you don't have to worry about replacing bulbs and you don't have to worry about brittle filaments. This unit features a nice clear lens with amber LEDs. It's a surface mount installation, so its got the two mount hole design. Mounting hardware not included but it does come with a foam mounting casket.

Now when it comes to the wiring, it's a three wire design. So the white wire is your ground wire, red wire is for power and the black wire . In the instructions it says you only connect the black constant on wire to positive power if used as a marker or running light.Otherwise, you just leave it disconnected. When it comes to the dimensions of the unit, starting with the overall length including the base, that measures about 5-1/4. Edge to edge going in this direction is about 2-5/16.

And the overall depth, that's how far it sticks out from the installation area, it's about 1-13/16 of an inch. Now we're gonna go and hook it up to power, that way you can see what it looks like with power running to it. So again if you want it to remain on all the time Then you would connect the black wire to the power source.And if you wanna do the quad flash You connect the red wire to power. So it's a really nice bright design. I'm gonna go and turn off the overhead lights so you can see it in a low light setting.

Now this unit features a total of four LEDs or four diodes. So the multi diode design really helps optimize the overall light output. And when it comes to the amperage, we're looking at 0.54 amps and that's taken at 12 volts.That's gonna do it for today's look at the 4-LED strobe light.