Summer Starts Here - Save up to 70%
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring. Powered ModuLite reduces strain on wiring system.
Features:
Specs:
Installation
This custom-fit T-One connector plugs into your vehicle's wiring harness, which is located behind the driver's-side and passenger's-side tail lights. You will have to remove the tail light assemblies to access this harness.
Once you've plugged in the T-connector, run the hot lead up to your car battery. Connect the lead to the included fuse holder, and then connect the fuse holder to the positive terminal on your battery and insert the provided fuse.
Once installation is complete, the 4-way flat connector will be stowed in an out-of-the-way location within your cargo area. It is recommended that you use a small amout of grease on all electrical connections - the plugs on your automobile and the 4-pole connector itself - to help prevent corrosion.
ModuLite Powered Tail Light Converter
A ModuLite power module is built into this T-One connector. Because most trailers run on a two-wire system - wherein the brake and turn signals are carried on one wire - the separate brake and turn signals from your vehicle's three-wire system need to be combined so they are compatible with the wiring system of your trailer. This power module functions as a tail light converter to combine the brake and turn signal functions of your automobile so that they run on one wire to properly activate your trailer's tail lights. Note: This will not affect how the tail lights on your vehicle operate.
With a ModuLite, your trailer's lights will be powered without overloading your vehicle's electrical system. Because the module draws power directly from your car's battery and bypasses the electrical routes that are used by a basic wiring harness, there is virtually no draw on your tail light circuits.
California residents: click here
Average Customer Rating: 4.8 out of 5 stars (25 Customer Reviews)
Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring. Powered ModuLite reduces strain on wiring system.I haven't installed it yet I have bought hitches and light kits from this company before, and have always been happy with all their products and their super fast shipping.
Got my wiring kit quickly as usual frokm etrailer. Installation instructions were spot on and made the install super easy. The hard part for me was running the power wire from the back to the front of the vehicle underneath and keeping it away from things that might damage it or cause a fire. I wonder why they don't let you fuse it to a power outlet wire in the hatch area but that is a manufacturer issue.
One year after purchasing and installing the Tenosha Wiring Harness, I can proudly report the equipment has met my every expectation. As with any purchase made from etrailer, I am very happy with my purchase.
Received my order in just 4 days which was great. Will order again from etrailer if I need more. Watched the installation videos which were a great help and was able to install trailer hitch receiver in about 1 hour by my self
Great installation videos! Made installation go a lot quicker. Very easy to install. Product seems to be very durable. Good heavy gauge wire going from the battery to the controller. More than enough zip ties provided with it to secure the power line appropriately.
This hitch is a quality product and is easy to install. The videos are extremely helpful. I know where I will buy my next hitch!
Easy install and hookup with simple hand tools. Highly recommend these kits. Have used one before on an 08 Edge for nearly 5 years with no issues.
Same part number as Draw Tite and no cross reference needed. I purchased this part $35 cheaper than I could get from my own wholesale supply company. etrailer shipped lighting fast. Part is exactly as specified.
Ordering was easy. Item description was detailed. Install videos on youtube from etrailer made install very easy and efficient. Definitely recommend.
Every thing went according to plan. Hitch and wiring came in a timely manner. Thanks
Excellent product except you need another pull wire you only have four and it should be 6
Great Product, Fast Shipping, Easy Installation. I could not be Happier!!!
Delivered on time . Install was easy with install video.
Great fit.Easy install
Excellent transaction. Thank you.
Great product and just as I ordered. The install is not for anyone without some good tools, a willingness to dismantle parts of the car and the desire to crawl under a car, but that is the nature of this item. I am very pleased.
Easy to install and fit perfect
Great product great service everything went absolutely perfect thanks to all involved
Awesome people!
Fast delivery and quality product
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Mike L.
7/5/2019
Thats a great question, and one we get frequently. Drawing the power directly from the battery serves to isolate the vehicles sensitive, complex and expensive to repair electrical system from any short circuits that may occur in the trailer wiring.