7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket - Vehicle End
Item # HM40975
Retail:$59.91
Our Price: $36.62
You Save: 39%
Confirmed to Fit
2016 GMC Acadia
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (2383)
- Q & A (0)
- Photos
2016 GMC Acadia - 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket - Vehicle End
- 7 Round - Blade
- 4 Flat
- Trailer Hitch Wiring
- No Converter
- Hopkins
This 7- and 4-pole trailer connector eliminates the need for an adapter and allows you to tow a trailer with either a 7- or 4-pole plug. Socket connects to your GMC Acadia's OEM wiring system and mounts with included bracket.
Features:
- 7- and 4-Pole trailer connector with mounting bracket
- Has high-impact, ABS plastic construction
- Stainless steel spring for easy cover operation
- Rubber gasket provides weather-resistant design
- Includes mounting bracket for easy, snap-in socket installation
- Black, epoxy-coated steel construction
- Mounts to bumper with included screws
Specs:
- Application:
- Replaces factory 7-way connector on Chevrolet, Ford, GMC and Nissan trucks and SUVs
- Can be used to add a connector to 2003 and newer GM pickups and SUVs
- Bracket dimensions: 4-3/4" long x 3-1/16" tall x 1-3/4" deep
- Distance between mounting holes (center to center): 2-3/8"
- 1-Year limited warranty
Note: Only one connector - a 4-way or a 7-way - can be used at a time because the covers on this socket will not open far enough to allow use of both plugs at the same time.
Similar to 11775, PK11893
40975 Hopkins 7- and 4-Way Trailer Connector Socket with Mounting Bracket - GMC Acadia End
Installation Details
California residents: click here
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- etrailer mistake
Customer Reviews
7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket - Vehicle End - HM40975
Average Customer Rating: 4.8 out of 5 stars (2383 Customer Reviews)
This 7- and 4-pole trailer connector eliminates the need for an adapter and allows you to tow a trailer with either a 7- or 4-pole plug. Socket connects to your vehicle's OEM wiring system and mounts with included bracket.by: ChrisP05/05/2024
This connector and bracket is a great product giving both 7 pin and 4 pin connections. I was able to reverse the bracket (making new holes) to allow it to fit behind the bumper cover piece that hides the hitch when not in use. The only drawback is that a wiring harness that fits the round 7 pin to the Buick Enclave rectangle plug is not available as a separate purchase. Had to buy an additional 7 pin outlet that came with the correct plug assembly and use that for my combo plug.
by: Michael07/12/2023
The box arrived opened and damaged. My wiring harness was missing. When I called to tell them my wiring harness was missing they told me that it was shipping separately but could not tell me when it would arrive. I later got an email telling me all of my items were delivered and asked me to leave a review. I still don't have my wiring harness and will not have the hitch installed by this weekend like needed because I don't know if I am ever getting my wiring harness.not to mention the box had no padding around the hitch so it's all scratched up.
by: 2006 Silverado 2500HD08/03/2023
Worked exactly how described, great replacement for my risty only bracket and 7 pin connector. Fits my 2006 Chevy Silverado 2500HD perfect, plug and play. Bought specifically because the bracket is included. And with both 4 and 7 pin connectors, I don't have to use an adapter anymore!
by: Jason06/24/2023
I am not sure how this bracket passed quality control. It sure is a good thing I'm not planning on using it. Really disappointing to see how quality is overlooked during the packaging process. This should have never left in this condition.
Jenny N.
6/30/2023
Oh! It is definitely not how we want the bracket to arrive to you. I will have our Customer Service team reach out.
by: Donald 06/19/2024
Very easy to install. The connection with the trailer plug is a snap.
by: Thomas 05/20/2024
This company is an absolute pleasure to work with. Item was delivered fast and exactly as described. This is the second item I’ve bout from etrailer the first being a 9000lb rated hitch. Will order again from these folks when if I need stuff for my truck.
by: James 02/28/2023
2021 Chevrolet Silverado 1500
Easy installation and very helpful installation video.
James
3/8/2024
One year later and no issues
by: Jim04/17/2024
It was easy to install and took care of the issue I had of one of the trailer light segments not working.
by: JimH05/13/2024
Very high quality connectors and bracket. Just what I needed.
by: Brad 04/11/2024
I bought this because I needed the bracket and it was the quickest way to get it they do not stock the bracket alone. We where installing tommy lifts and needed t move the original connector which was installed on the bumper.
by: William 05/06/2024
took longer to remove the factory cover than to instal the connector. worked as advertised. I would buy this again if ever needed
by: Ali 12/30/2022
This thing couldn't be better. Easy mounting. Plug and play. I can now connect any trailer I want. Love it, love it, love it!
Ali
1/7/2024
This was a major upgrade for me at the time. A year later, Ive hauled massive loads across the country, and this connector harness works perfectly every time
by: Ron P03/17/2014
2014 Chevrolet Silverado
Here's some snaps of my Hopkins #40975 installation. I can confirm that it's an identical replacement for the 2014 Silverado 1500 trailer-light blank insert, no bracket required. It took me 30 seconds to plug the Silverado's OEM 7-pin round connector (located inside the blank insert) into the #40975 Wiring Kit and snap it into the cutout. Then I tested the flat 4-pin outlet of the #40975 with a 5 dollar 4-pin LED tester from West Marine, and all light functions tested good. Shweet! To remove the OEM blank plug, it helps to reach behind it and pinch the two spring clips holding it in place... same with the #40975 if it needs to be removed for some reason. When I ordered the part from eTrailer, your site had a comment, "This will not fit your vehicle. See below for compatible parts," or words to that effect. Maybe take a look at that and remove the comment, as the #40975 is an exact fit for 2014 Silverado 1500, no bracket needed. Thanks, eTrailer team!
Ron P.
3/19/2015
Although I havent towed since installing the Hopkins Pollak wiring kit since I installed it a year ago, I have tested the 4-pin connector for proper function using a 4-pin LED tester from West Marine and it checks out okay. Recently I inspected the kit for water intrusion mentioned by one of the raters, and I found no evidence of moisture inside the dual-connector compartment. On installation, I did make liberal use of the dielectric grease that accompanies the kit. Good product, easy installation, and great price.
by: Matt W07/07/2018
2017 Nissan Pathfinder
It came with it's own bracket, which is a plus. It was compatible with etrailer.com's part number C56357, which is also a plus. The self tapping screws being the only hardware coming with the item was a disappointment. I just installed etrailer.com's part number 76301 hitch receiver which has a mounting plate for brackets like this. The self tapping screws, which might have been effective, wouldn't have looked "professional." After finding some hardware which worked, it went on smoothly and fits well with the rest of the assembly.
Matt W.
7/7/2019
This product has been working well for the past year. I feel this was a smart purchase.
by: Mark 03/20/2024
2018 Chevrolet Silverado 1500
Item received as described. It was simply plug and play. Out with the old, and the new was an exact replacement. Very satisfied.
by: Russell 05/21/2024
Plug and play baby! 2 minute install. Finally an easy fix to something!
by: Rob09/22/2018
2015 Audi Q7
Scratched my head for a while, trying to find a quality way to connect this vehicle end 4/7 wire socket to my trailer ready (almost) 2015 Audi Q7. Finally decided that it really didn’t need to be bolted, but could be hose clamped to the existing heavy duty Audi bracket.
Mounted it sideways with a 1” diameter and a 3” diameter hose clamp. Be sure to use a 3” clamp with lots of serrations that all it to tighten it down a lot.
You’ll need to drill out the small hole of the supplied bracket to allow a clamp to fit through it. The other hole is a slot, and works unaltered. Small clamp on bottom, large clamp on top.
You’ll also need to relieve a small spot on the trim piece to make room for the 4-wire door to o-en freely. This is marked as red on one of the pictures.
Looks good and should work good!
Rob
9/22/2019
Good installation approach for q7’s. Keeps water from collecting in wiring junctions.
by: Douglas 06/22/2023
it works as engineered
Doug
6/23/2024
great
by: Dennis 02/08/2024
2010 Ford Van
This dual connector adds a professional looking touch to our tow wiring installation
by: Mike07/15/2023
7 and 4-Pole Trailer Connector Socket does not fit my towing vehicle.
Today I just received my etrailer order #114979486, that consisted of: Curt T-Connector Vehicle Wiring Harness with 7-Way Trailer Connector (ITEM # C56431) and 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket - Vehicle End (ITEM # HM40975) for my 2020 Ford Ranger. I easily installed the harness, but the Trailer Connector Socket does not seem to fit on the rear bumper, next to the license plate.
Last week, I chatted with etrailer customer support rep and I was assured that the connector Socket (ITEM # HM40975) would fit on my 2020 Ford Ranger.
This etrailer customer support representative referenced a previous Q&A Topic titled, "Can the HM40975 be used on a 2021 Ford Ranger". I was also assured that 2020 and 2021 Rangers have identically constructed rear bumpers.
Today, I spoke with a different etrailer customer support representative. This rep told me 7-Way Trailer Connector (ITEM # C56431) was not compatible with the 2020 Ford Ranger recommend reaching out to the manufacturer directly for more information.
I'm very frustrated!!!! Can I please get a solution to this issue ASAP.
Jenny N.
7/19/2023
I am sorry that this has been a frustrating experience, however I do have an answer for you. The Hopkins connector part # HM40975 is technically not a fit on its own for a 2020 Ford Ranger. The short reason why is that the Ford Rangers do not have the round US Carr type of connector to plug into. Now by adding the Curt harness part # C56431 like you did, does make that round connector that you can plug into the back of the Hopkins connector that will give you the 7 and 4 way you want. Since it is using two different manufacturer products together, I do encourage you to test the 4 and 7 way to make sure all the signals are working correctly. In theory they work together, however they are not tested. The issue is going to be that the bracket that comes with the Hopkins connector is not going to match with anything on the Ford Ranger to connect to. It would just be bolted to the bumper or you could also consider using part # C57202 to install it on your hitch.
by: Bert 03/28/2024
The self tapping screws that come with the mount are junk,
The product is Good.
by: Lonnie04/08/2024
Great product, it was just what I was needing to complete my project.
by: Bill04/07/2024
2020 Chevrolet Silverado 1500
Another easy installation old one out doing in 15 minutes
by: 1957okie04/03/2014
Great product at a great price. It was an exact fit and looks great. I like having the ability to plug in my 7-prong plug on my travel trailer or the 4-pin plug on my boat, without needing an adaptor. Got super fast shipping too. Buying from etrailer.com was a win- win-win.
Bob R.
5/31/2014
What year is your silverado
Rachael H.
6/4/2014
Randy S.
6/6/2014
Its a 2014 Silverado 1500 Double Cab
by: Doug 11/02/2022
Fit and works fine. My old one was just the 4 plug so now I don’t have to use the adapter for 7 prong anymore.
Doug
11/3/2023
Works fine- no issues.
25
2386
Show More Reviews
See what our Experts say about this Hopkins Custom Fit Vehicle Wiring
- 7-Way Recommendation for 2024 GMC Sierra 1500Hey Benjamin, we have the Hopkins 7-way part # HM40975 that fits your 2024 GMC Sierra 1500 and would be a great option. It will fit into the 7-way/4-way bracket you have on your rear bumper and will plug right into the trailer wiring connector behind your bumper. I attached an install video link for this for you to check out as well.
view full answer... - Can the HM40975 Be Used on a 2021 Ford Ranger?From all the info I could find, the 2020 Ranger and the 2021 Ranger both use the same stock bumper. With that being said, the 7 Way plug that is included with the Curt # C56431 can definitely be replaced with the 7 Way plug from the # HM40975.
view full answer...
- Will The Pollak Replacement 7-Pole, RV-Style Trailer Connector Socket Fit a 2022 VW ID.4? The Pollak Replacement 7-Pole, RV-Style Trailer Connector Socket # PK11893 plugs into a standard USCAR # 20147 pigtail. As I can not see if this is the same connector you have on your 2022 VW ID.4 I cannot verify it is the correct connector. If you can verify this is exactly what you have or send me in some images then I can verify it is what you need. You might also consider the 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket # HM40975 if you prefer to have both the 7-way...
view full answer... - Recommended Hitch and 7-Way Connector for a 2020 Jeep Cherokee w/ the Tow Package You are correct with most of the parts. The Curt Hitch item # C13395 is confirmed to fit all models of the 2020 Jeep Cherokee, including your High Altitude Edition. This hitch is custom fit and bolts to your Jeep with included hardware. Since your Jeep does not have the towing package, to install a 7-Way harness you will need two separate wiring harnesses because they don't make just one that'll do the job. The first harness you'll need is the Curt Vehicle Wiring Harness item # C56406....
view full answer... - 2021 Ram ProMaster 1500 Trailer Wiring Recommendation for 4-Way and 7-Way SocketsTo replace a 4-Way/7-Way connector on your 2021 Ram ProMaster 1500 you need the Hopkins Socket Kit # HM40975. Otherwise, if you're needing to ADD 4-Way and 7-Way sockets then you need the following parts: - Curt T-Connector Vehicle Wiring Harness # C58DR - Universal Installation Kit # ETBC7 - No-Drill Mount Bracket, Long # 18136 - Extra 10 Gauge Wire # 10-1-1 (on an as-needed basis) If you also need a brake controller then I really like the Redarc Tow-Pro Liberty Brake Controller...
view full answer... - Parts Needed To Add a Factory Style 4/7-Way Connector On a 2022 Ford Bronco With LED Tail LightsAs you already have the Curt Trailer Hitch Receiver # C76WR for your 2022 Ford Bronco Badlands you will only need the wiring. The Tekonsha OEM Replacement Vehicle Wiring Harness # TK55VR is compatible with your Bronco having LED taillights. This will include all the wiring for the trailer brake controller as we do not have a kit with all the wiring without the brake controller wiring. If you later need a Brake Controller # 90195 you will be able to add one at a later date. Rather than use...
view full answer... - Class IV/V Trailer Hitch Receiver and 7-Way for a 2020 Ford F-150 Without Factory Tow PackageThe Draw-Tite Ultra Frame Trailer Hitch Receiver # DT35MR is currently our only class IV receiver that fits your 2020 Ford F-150 XLT that did not come with the factory receiver. The Curt T-Connector Vehicle Wiring Harness with 7-Way Trailer Connector # C56413 will connect to the factory connector under your truck to give you a 7-way connector. You can swap the 7-way end for the 7- and 4-Pole Trailer Connector Socket # HM40975 which is the factory style connector. This will allow you to...
view full answer... - Recommended 7-Way Trailer Wiring Harness and Brake Controller for 2022 Honda PilotThe T-One Vehicle Wiring Harness for Factory Tow Package item # 118286 is our best trailer wiring option for a 2022 Honda Pilot. It's the only one for a direct plug-in 7-way so there will be no splicing. It has the 7-way blade style connection but you can replace this end with one that has both the 7-way and 4-way using the 7- and 4-Pole Trailer Connector Socket item # HM40975 which also comes with a bracket. For a trailer brake controller, I recommend the Tekonsha Prodigy P3 Trailer...
view full answer... - Vehicle Wiring Harness For a 2022 Ford F-150 Without Factory Tow Wiring HarnessI recommend adding the Tekonsha Universal 7-Way # 22551 on your 2022 Ford F-150 as there is not an aftermarket custom fit wiring harness. You will be able to switch out the included 7-way connector for the 7- and 4-Pole Trailer Connector Socket # HM40975 so you will be able to have both connectors without needing an Adapter # 78118. If you are needing a brake controller the Prodigy P3 # 90195 is a very user friendly controller that is easy to read and customizable. It will plug into the...
view full answer... - Parts Needed To Add Hopkins 7/4 Pole Connector To a 2020 Ford F-150 With Factory 4-WayI have a couple ways you can install the 7- and 4-Pole Trailer Connector Socket # HM40975 on your 2020 Ford F-150 with a 4-way flat factory connector. The first is going to be the easiest but is more costly. You will use the harness from the Curt 7-Way # C56413 and connect to the connector you found. The Curt harness will connect to the factory wiring as seen in the installation video I have linked near the bottom of the page. Otherwise we do have the Hard Wire Connector # 20147 which...
view full answer... - What 4-Way and 7-Way Connector do You Recommend for My 2021 Ford Bronco?From the sound of your question, it sounds like you are wanting an option for both a 4-way and a 7-way to install into your 2021 Ford Bronco and do not currently have any wiring. For a plug-in 4-way harness, I recommend the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # TK99VR. However, you need a separate wiring harness in addition to the # TK99VR to have the 7-way installed. For that part, that is the Universal Installation Kit for Trailer Brake Controller - 7-Way RV...
view full answer... - Recommended Trailer Hitch Receiver & Wiring 2024 Chevy Silverado 1500 Without Factory Tow PackageI recommend installing our etrailer Trailer Hitch Receiver # e79AR on your 2024 Chevrolet Silverado 1500. This will bolt to factory holes already in your frame so there is no drilling required. You should already have the wiring for adding the factory style Connector # HM40975. This will be found directly behind the rear bumper cutout for this connector.
view full answer...
- What Wiring Diagram do You Have for the Hopkins 7-Way # HM40975 on My Ford F-350?I can definitely help you out with that. On my end, I could not find a Hopkins 7-pin SAE J1128. With that being said, the most common 7-way on your F-350's end will look like the pins on the 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket - Vehicle End # HM40975. I went ahead and attached a diagram that shows the pin location and functions of each pin. If you need a 7-way on your trailer's side, I recommend the 7-Way Molded Connector w/ 18' Cable - Trailer End # 50-67-106....
view full answer...
- How to Add a 7-Way Connector and Brake Controller to a 2015 Audi Q7It sounds like your 2015 Audi Q7 does not have the factory tow package. To add a 7-way to your Audi you will need two separate wiring harnesses. The first one is the Tekonsha ZCI Circuit Protected Vehicle Wiring Harness w/ 4-Pole Flat Trailer Connector and Installation Kit item # 119250KIT. This wiring harness does not require any cutting or splicing. It will provide you with a 4-flat connector to control the lighting functions on your trailer. I have linked an installation video below....
view full answer... - Will Ford 9U5Z-14489-MAA Connect to Curt Wiring Harness on 2017 Ford F-150It sounds like you want to install the Curt # C56413 and then use the Ford 9U5Z-14489-MAA instead of the included Curt 7-way connector. The Ford part you're referencing is the same as the Hopkins # HM40975 which is compatible with the Curt wiring harness so the two can be used together.
view full answer... - Recommended 7-Way Connector for a 2023 Chevy Express Cargo VanUnfortunately that 12 pin rectangular plug has nothing to do with the trailer wiring harness. To add a 7-way and 4-way connector to your 2023 Chevy Express Cargo van you're going to need to buy two separate harnesses. The reason for this is that the van's with the towing package came from the factory with the 7-way connectors like item # HM40975. The other ones have nothing and no one made a custom fit 7-way that just plugs in. The first connector you will need is the Curt Wiring Harness...
view full answer... - Can I Use A Different 7-Way Plug On # TK22113When it comes to The Tekonsha OEM Replacement Vehicle Wiring Harness w Brake Controller Adapter - 7 Way Trailer Connector # TK22113 you can attach The 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket - Vehicle End # HM40975 and use it as the 7 way plug instead of the one provided for you in the # TK22113. Using the # HM40975 will give you both the 7 way and 4 flat option. I have attached installation video and a review video link below.
view full answer... - Equipping a 2020 Jeep Grand Cherokee for Trailer and Flat TowingLet's begin with a hitch and trailer wiring for towing your RV with the Jeep Grand Cherokee. For a hitch, I'd recommend the Curt Class III hitch, part # C13182. You'll also need a ball mount and a trailer ball, provided in the # 989900 etrailer ball mount kit. For a brake controller, I'd go with the Curt # C51180 Echo Wireless Brake controller. The Echo will communicate wirelessly with your smart phone, which you'll use to control the braking action of the trailer. For a vehicle equipped...
view full answer... - How To Tell If a 2014 Chevrolet Silverado 1500 Has The Tow Package Wiring For a 7-WayAll the 2014 Chevrolet Silverado's should have the factory wiring for a tow package. The 7- and 4-Pole Trailer Connector Socket # HM40975 is the most commonly used part as it will fit right into the factory cutout in the rear bumper and gives you both a 4-flat and 7-way connector like the factory option. I have included an installation video near the bottom of the page so you can see where the factory wiring connector is and how easy it is to install.
view full answer... - Parts Needed to Add Brake Controller to 2012 GMC Canyon With Factory 4-WayYou will need to add a 7-way to install the # 39523 (80500) on the 2012 GMC Canyon. If the 4-way at the back is plugged into a round US Car connector behind the bumper you can add a 7-way using the # HM40975. If it is an aftermarket 4-way, or attached using a different connector, you will have to add a 7-way using the # ETBC7. Since it is a hardwire installation you will also want the Pigtail Wiring Harness for Tekonsha and Draw-Tite Brake Controllers - 34" Long # 7894. This will plug...
view full answer... - Is Hopkins or Pollak Better for Trailer Connectors?Personally, I'm a much bigger fan of Pollak than I am of Hopkins. In my experience, I've had fewer issues with 7-way plug fitting loosely with Pollak brand 7-ways and Pollak is generally the "go-to" brand for most OEM truck setups. The snag is there isn't a 4-way and 7-way Pollak branded trailer connector currently, but I have some good news. The Hopkins 7 and 4-Pole Trailer Connector, # HM40975, is actually made by Pollak, but sold by Hopkins. This is the same plug I have on my Silverado...
view full answer... - Recommended 7-Way Trailer Wiring Harness with 4-Way and Brake ControllerThe Tekonsha OEM Replacement Vehicle Wiring Harness w Brake Controller Adapter part # 22114 is the best option for a 2018 Ford Transit T350 (All Models with Single Rear Wheels) as it requires the least amount of modifications needed. That said, this comes with a 7-way trailer connector only so if you needed both a 7-way and 4-way you would also need the 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket part # HM40975 to replace the one that comes with the above. For a brake controller,...
view full answer... - Parts Needed To Add a Factory Style 4-Way/7-Way Connector On 2019 Toyota Tacoma Without Factory TowFor your 2019 Toyota Tacoma you will be able to plug the Hopkins Connector # HM40975 to the Tekonsha OEM Replacement Vehicle Wiring Harness # 22117. This Hopkins is the same as the 40974 but comes with a mounting bracket which you will not use. The connector which comes with the Tekonsha uses the same OE style connector as the Hopkins so there is no additional wiring adapter or splicing required. The Redarc Tow-Pro Liberty Brake Controller # RED24FR can be mounted in one of the open slots...
view full answer... - Can I Add An Additional 4 Flat Plug To My 2019 Ram 1500Yes we have just the thing. To add on an additional 4 flat plug, you can use the Tekonsha # 118384. This will plug in line behind the factory 7 way plug and allow you to connect your additional lighting.
view full answer...
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
Test Fit:
Joe V
Test Fit:
Nicholas E
Test Fit:
Shane T
Test Fit:
Randy B
Test Fit:
Joe B
Test Fit:
Andrew S
Test Fit:
Brent H
Test Fit:
Shane H
Test Fit:
Robert C
Test Fit:
Conner L
Test Fit:
Jacob H
Test Fit:
Ryan G
Test Fit:
Adam E
Test Fit:
Matthew B
Expert Research:
Mike L
Expert Research:
Sarah L
Expert Research:
Robert G
Expert Research:
Patrick B
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Reno H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Expert Research:
Lori W
Expert Research:
Jeffrey L
Video Edited:
Zack K
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Andrew L
Video Edited:
Kathleen M
Video Edited:
Dustin K
Video Edited:
Chris R
Video Edited:
John S
Video by:
Andrew K
Video by:
Alan C
Video by:
Zach D
Video by:
Jonathan Y
Video by:
David F
Video by:
Aidan B
Video by:
Thomas T
Written by:
Tyler C
Updated by:
Adele M
Updated by:
Wilson B
Updated by:
Alexander C
Installed by:
Cole B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Katrina D.
8/3/2023
I am sorry to hear that your order arrived in this condition. I see that our customer service department is currently working on a solution for you.