bing tracking image
  1. Custom Fit Vehicle Wiring
  2. Ford
  3. F-150
  4. 2011
  5. Mighty Cord
FITS 2011 Ford F-150
Mighty Cord Replacement 7-Way RV Style Trailer Connector for Factory Tow Package - Vehicle End

Mighty Cord Replacement 7-Way RV Style Trailer Connector for Factory Tow Package - Vehicle End

Item # A10-7072VP
Retail:$14.23
Our Price: $13.31
You Save: 6%
Custom Fit Vehicle Wiring
Confirmed to Fit
2011 Ford F-150

with factory 7-Way

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Add to cart
In Stock
A10-7072VP - Custom Fit Mighty Cord Trailer Hitch Wiring
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Need help with installation?
Locate installers near me
Call etrailer.com at 1-800-940-8924 for expert service. We are your Ford custom fit vehicle wiring experts, and offer a great price. etrailer.com carries a complete line of Mighty Cord products for your Ford F-150 2011. Mighty Cord Replacement 7-Way RV Style Trailer Connector for Factory Tow Package - Vehicle End part A10-7072VP from Mighty Cord can be ordered online at etrailer.com. Complete custom fit vehicle wiring installation instructions and technical support.
  • All Info
  • Reviews (136)
  • Q & A (0)
  • Photos

2011 Ford F-150 - Mighty Cord Replacement 7-Way RV Style Trailer Connector for Factory Tow Package - Vehicle End

  • 7 Round - Blade
  • Trailer Hitch Wiring
  • Mighty Cord

Replace the worn or damaged 7-way, RV-style trailer connector on your tow Ford F-150 with this sealed, Ford F-150-end socket. Spring-loaded dust cover protects the copper-plated terminals. Easy installation - plugs into OEM port.


Specs:

  • Dimensions:
    • Socket diameter: 1-7/8"
    • Mounting holes: 2-1/2" wide x 1-13/16" tall center-to-center
  • Current rating: 30 amps
  • Voltage: 12 volts
  • 1-Year warranty


Features:

  • Replaces the worn or damaged 7-way, blade-style connector on your tow vehicle
    • Designed for use with factory tow package
  • Dust cover with a stainless steel spring protects the connector from moisture and debris
    • Hook on inside of cover helps keep your trailers connector from coming loose while plugged in
    • Rubber gasket seals the lid when closed
  • High-impact, nylon construction with copper-plated terminals resists corrosion
  • Simple installation - plugs straight into OEM port


A10-7072VP Mighty Cord OEM 7-Pole Blade-Style Trailer Connector Socket - Ford F-150 End


California residents: click here


Customer Satisfaction Score:


Customer Reviews

Mighty Cord Replacement 7-Way RV Style Trailer Connector for Factory Tow Package - Vehicle End - A10-7072VP

Average Customer Rating:  4.8 out of 5 stars   (136 Customer Reviews)

Replace the worn or damaged 7-way, RV-style trailer connector on your tow vehicle with this sealed, vehicle-end socket. Spring-loaded dust cover protects the copper-plated terminals. Easy installation - plugs into OEM port.

by:
GMC Acadia

I ordered this when none of the lights would work on all three trailers I owned. After replacing the fuse and checking everything else it came down to this. It was a perfect fit and super easy to install. The wiring harness for my acadia is a plug and play so no splicing or sodering. I would highly recommend this product.



by:
2018 Dodge Ram Pickup

The 7-Way RV Style Trailer Connector for Factory Tow Package shipped quickly and fit perfectly in my RAM 2500 diesel bed. It was difficult to install only because the hole in the bed wall was rather tight so I had a difficult time pulling the cable into the bed to plug the replacement part in (no fault of the part). The Etrailer-provided part seems to be made of a much better/durable plastic than the one that needed replaced. The part that it replaced was cracked/broken in 2 places around the border including at one of the mount screws due to hard/brittle plastic. All the electrical connections work perfectly. Only improvement I would recommend is send replacement screws with the part--Luckily the screws were still in place, even at the one mounting hole that was broken. I was unable to find the correct replacement part at several other online sites. The brief instructional video on ETrailer.com was also very helpful.



by:
2018 FordF-150

Drop in replacement on my Ford F-150 for my damaged 7-way (also purchased from etrailer). The 15 minute installation was a breeze. Great support from this company as well! Thanks.



by:

I placed an order and within five minutes it was processed !! amazing ! David L was so helpful. Really appreciate it !



by:
2015 Chevrolet Silverado 2500

Fast delivery and correct fit!



by:

Plug n play. Bout as straightforward as it gets



by:

good
product



by:

Easy to do business



by:

This worked awesome, I purchased the three way truck bed harness for my gooseneck and replaced the rear main
7 way at the same time.
E trailer shipped it quickly and there website pictures and instructions where great for the installation.



by:

Fits if you want a gap in the factory bumper. Does not fit like factory connector.

I was so dissatisfied with customer service I kept the plug, and will not order from Etrailer again.



by:

I had to put in my information on my truck and the plug I received was not the factory one. Had to drill holes instead of just the twist out plug that comes in a Silverado

Etrailer Expert

Jenny N.

11/9/2021

Thank you for sharing. I researched 7 way connectors for a 2004 Chevy and found that part # PK11916 is a better option for a twist in plug replacement. It will fit with 2007 - 2013 ChevroletGMC 1500 trucks and 2007 - 2014 ChevroletGMC 25003500 trucks.



by:

I have to say that I've used Etrailer for all my trailer needs and have been so overwhelmed at the price and the product .. I'll never shop any other place .. why .. no one has ever come close to the savings I found here .. I bought my heavy hitch from here and couldn't be happier and this item was the perfect match to what I needed .. Thanks Etrailer !



by:

I received the wrong part based on your recommendation. Here’s my exchange with your customer service rep :
Good Morning,

Thank you for clarifying.

Based on the item you want to return from your order, the return cost is greater than the part. Therefore, it would not be cost effective to return these items. I recommend selling locally to make your money back.

If you have any questions or concerns please let me know.

Thank you,

Tiffany H.

Well, Tiffany, this is a good lesson for me. I buy a part from your company solely based on the recommendation of your representative. It arrives and it’s the wrong part. And I have no recourse. Not even an offer for a credit nor an offer to send the correct part. A complete waste of my time and money. Didn’t even receive an apology. Caveat emptor. Well, the lesson is learned. I will never do business with etrailer again. I will never recommend etrailer to my friends. And I will take every opportunity to disparage your company.



by:
Chevrolet Colorado

Just exactly what I needed. It works fine and fits my Colorado wiring harness.



by:
Volkswagen

It fit in my 2019 Volkswagen Atlas. I have yet to hook up to a trailer, but being an exact fit I do not expect an issue.

Joe

9/24/2020

Doing great



by:
2005 Chevrolet Suburban

Works fine. However I had to drill holes for screws to hold the connector in place. The original was just twisted in place.

Etrailer Expert

Mike L.

5/13/2018

We do offer a 7-way connector that twists into place, part # HM40920.

Joseph

5/13/2019

No problems. Working as good as the original



by:
2013 Audi Q7

Harness fit perfectly. Shipping fast. Very happy.



by:

Just the right configuration I needed. Works for all the vehicles that I tow. Good construction.



by:

Fit perfectly into place on my fifth wheel 7-way extension into the bed of my truck. The previous bracket broke and the trailer brakes quit making contact. This was the same as the broken one, and fit up perfectly and all contacts are working. I gave it a rating of four because the previous one (which was the same) broke after about 3 years of use.



by:

Product worked well and we actually mounted not in the provided location in hitch but we but the housing wheeler you can mount it on the top of the hitch. This product has been working well for us and recommend to all. It worked well in our 2915 Pathfinder



by:
2014 Chevrolet Silverado

Wiring portion is direct fit to 14 Silverado. Since i replaced factory plug had to drill new holes and filled original hole with cut to fit scrap plastic.



by:

This Mighty Cord 7-way connector was an exact replacement. I received the part very quick and installation was easy and took all of 3 minutes...just plug and play.



by:

Wow great job to all, what service and the hitch, the plug for the lights, and the license plate holder, is all you said, and it took less than 15 min to install everything. What your company is doing right now, document , train and continue to do it, you have made this customer very happy and we will do business again! Sorry no pics because its hiding behind the roll pan just like you said it would!

Thanks
John D Ohman
Port St Joe Fl



by:
2010 Dodge Ram Pickup

This is exactly what I needed fit perfectly for my application! Of ah which is a 2010 Ram 3500 quad cab 4x4!



by:
2015 Chevrolet Silverado

Perfect match plug and play for a 2015 Chevrolet Silverado 3500 HD Duramax. 10 minute install. It would have been 5 stars if it were more of a snug fit into your receptacle. I would recommend.


25
136
Show More Reviews

See what our Experts say about this Mighty Cord Custom Fit Vehicle Wiring

  • Replacement Trailer Wiring 7-Way that Fits 2006 Ford E-350 Van
    Sounds like you have a standard round trailer wiring connector present on your 2006 Ford E-350 which we have 7-ways that fit like the Mighty Cord # A10-7072VP. As far as something that will fit through our van's bumper and can be sealed I am not totally sure this is what you are looking for but it will work as a 7-way.
    view full answer...
  • Adapter Needed to Tow Trailer With 6-Way Connector Using 7-Way Connector Equipped Vehicle
    For a tow vehicle that has a 7-way blade-style trailer connector like # A10-7072VP and a trailer that has a 6-way connector such as # PK11604, you could absolutely use an adapter like the # 47549 you'd looked at. This is a universal adapter, which is handy because there are two accepted ways to wire a 6-way trailer connector. One way uses the center pin as the 12-v trailer accessory power feed, the other uses center pin as the brake output. The adapter has the center pin wired as the...
    view full answer...
  • Wiring Harness for 2013 VW Touareg
    I am not 100 percent sure what you are asking in regards to plugging into the factory connector but I can tell you that there are two connectors that will fit your 2013 VW Touareg, the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118668 and the Mighty Cord Replacement 7-Way RV-Style Trailer Connector for Factory Tow Package # A10-7072VP. The 7-way is simply a replacement connector for your VW's factory 7-way, if that is what you have. If you have no connector at all...
    view full answer...
  • Replacement OEM 7-Way For 2017 Toyota 4Runner
    We have replacement 7-ways that fit your 2017 Toyota 4Runner but the one you mentioned does not fit. So instead you'd want the # A10-7072VP which will plug right into the round connector you have at the rear of your vehicle and give you a new 7-way.
    view full answer...
  • Tekonsha Prodigy RF Wireless Brake Controller Troubleshooting Connection With 2005 Ford F-150
    It sounds like you may have a short in your wiring system on your 2005 Ford F-150. I recommend using a Circuit Tester # PTW2992 to test the 7-way vehicle connector. Inside the 7-way it is going to be the blade that is in the 1 o'clock position. with the ignition on it should be receiving battery power. Be sure to also check the ground terminal in the 7 o'clock position for a good ground connection. If you do not have power you will want to check the fuse in the engine compartment location...
    view full answer...
    Image 1 for
  • Troubleshooting Running Lights Not Working On 5TH Wheel Camper When Connected To 2013 Ford F-250
    First if you are using a connector like the Hopkins Endurance 5th Wheel/Gooseneck 90-Degree Wiring Harness # 41157, try connecting to the bumper connection to determine if the Connector # A10-7072VP in the bed side is bad. You can also remove the additional harness by connecting the factory harness directly to the rear bumper connection to determine if the harness itself is bad. If those tests fail or you do not have the harness to begin with, you will want to remove the factory connector...
    view full answer...
    Image 1 for
  • Troubleshooting Trailer Running Lights Not Working on 2008 Ford Super Duty Truck
    The most likely reasons your trailer running light circuit isn't working is corrosion on the pins of the trailer connector or a blown fuse under the hood of your 2008 Ford Super duty truck. First try cleaning all of the pins on your 7-way with sandpaper to see if that allows the connection to be made and if that does not work try checking the fuses under the hood of the truck. If the 7-way of your truck looks pretty rough you might just replace it with the part # A10-7072VP.
    view full answer...
  • Are The Curt Universal Wiring Harness & Mighty Cord Replacement 7-Way Compatible?
    Since the Curt Universal Wiring Harness for Vehicle-End Trailer Connectors # 56229 and the Mighty Cord Replacement 7-Way RV-Style Trailer Connector for Factory Tow Package # A10-7072VP have round connections both products are a direct fit. To properly operate this product, first you take the wires from the Curt Universal Wiring Harness for Vehicle-End Trailer Connectors # 56229 and connect them to the appropriate wire from the vehicle using wire strippers, heat shrink, butt splices and...
    view full answer...
  • 7-Way Wiring and Brake Controller for 2017 Chevrolet Express 3500 15 Passenger Van
    If your Express 3500's connector near the bumper resembles the round U.S. Car type connector in the photo I linked then this will be the trailer tow package connector you will use to plug in a 7-way trailer socket like # A10-7072VP or # HM40975. With or without the tow package wiring you can still install a 7-way using the kit # ETBC7 you referenced along with a 4-pole harness # 118392 which plugs in at the tail lights. This setup will be independent of any factory wiring and it will provide...
    view full answer...
    Image 1 for
  • Troubleshooting Issues with 2012 VW Touareg 7 Pin Trailer Connector
    If your trailer or tester utilize LED lights that is likely the issue. The factory 7-way on your 2012 VW Touareg wasn't designed to function with LED's without the adapter # C57003 which has integrated load resistors to allow LED's to not trigger lamp out sensors. This also helps with the emergency flashers. If your trailer and tester are not LED, then you may have an internal issue with your 7-way and you can use either # A10-7072VP or # HM40975 to replace it. Before replacing, I...
    view full answer...
  • Replacement 7-Way and Bracket for 2001 GMC Sierra 1500
    The Hopkins Endurance Twist Mount 7-Way RV Trailer Connector # HM40930 is designed specifically to mount (and twist) into the factory bracket for your GMC Sierra. Unfortunately this style bracket is not available as an aftermarket part. You may be able to contact your local GMC dealer to see if they have this part available but if not your best option will be to use a standard 7-Way and bracket as a replacement. For this I recommend the Mighty Cord 7-Way # A10-7072VP along with the Mounting...
    view full answer...
  • Replacement Trailer Wiring Harness For 2013 Toyota Tacoma
    There are a couple options depending on the wiring you have on your Tacoma. If you smashed your 4-way connector on your truck and want to replace the entire wiring harness then I recommend part # 118496. This plugs into the vehicle wiring either behind the tail lights or along the frame rail of your truck. This includes the tail light converter and is a plug and play harness. If you tore up the 4-way connector you can simply just use a 4-way connector like part # HM48030. You can match...
    view full answer...
  • Replacement Trailer Plug Door for T-One Vehicle Wiring Harness with 7-Way Trailer Connector
    In regards to a T-One Vehicle Wiring Harness with 7-Way Trailer Connector like part # 118266, the door by itself cannot be replaced but you can obtain just the connector with the Mighty Cord Replacement 7-Way RV-Style Trailer Connector part # A10-7072VP which is the exact same one that would have come with the kit.
    view full answer...
  • Socket Diameter of Mighty Cord Replacement 7-Way # A10-7072VP
    I went out to our warehouse and measured the rear socket diameter on the Mighty Cord Replacement 7-Way # A10-7072VP to be right at 1-7/8 inches at its largest point (from the small notch at the top of the unit). I have attached an image to assist.
    view full answer...
    Image 1 for
  • Which Trailer Wiring Harness for 2019 Nissan Pathfinder
    The harness you need will depend on whether you're wanting a 4 pole or a 7-way trailer connector. I'd recommend using part # 118273 which provides a 7-way, that way you could use it with an adapter like # PK12716 and be covered for the 2 most commonly found trailer connectors. The # 118273 includes the trailer connector, the wiring harness, the jumper harness and the relays needed to activate the tow package on your Pathfinder. If your hitch has a tab on it for attaching a mounting bracket,...
    view full answer...
  • Replacement OEM 7-Way Connector w/ a 4-Way
    Yes, you can. Both the Curt T-Connector item # C55774 and the Mighty Cord Replacement 7-Way item # A10-7072VP use the USCAR 7-way socket. These are what every vehicle that comes from the factory with a 7-way connector has. Since your 2023 GMC Canyon came from the factory with a 7-way connector, you can use the Curt item # C55774 to replace your broken one. This will provide you with both a 7-way and a 4-way. I have linked an installation video below.
    view full answer...
  • Installing 7-Way Trailer Connector on 2017 Jeep Cherokee
    I'm assuming that your 2017 Jeep Cherokee isn't equipped with the factory tow package. To install a 7-way trailer connector, the route you'd choose will depend on your desired outcome. As a starting point, you'll need the functional 4-pole trailer connector provided by part # 118605. If your trailer does not have brakes, and you don't need the 12-v feed to the trailer to be functional, you can just use the # 37185 4-pole to 7-way adapter. You'll plug the adapter into the 4-pole provided...
    view full answer...
  • Troubleshooting Brake Controller and Poor Braking on Trailer Towed by 2018 Toyota Tundra
    The three main things that could be causing your issue are: 1) Insufficient brake adjustment. The adjusters should be turned 'out' until you can't turn the wheel by hand when it's jacked up off the ground. Then the adjusters should be backed off by 10 or so clicks so there's still a slight drag from the brake shoes. 2) The brake shoes should be broken in correctly or 'burnished'. This is done by applying the brakes 20 to 30 times to decrease the speed by 20 mph. Example, once reaching...
    view full answer...
  • What Would Cause 7-Way Trailer Connectors on Truck and Trailer to Melt When Connected
    Sounds like you had a massive short to ground on the 12 volt accessory circuit of the trailer wiring. This circuit is in the 1:00 position of the female connector on the truck. The ground circuit is in the position opposite of this in the 7:00 position. My guess is there was exposed wire on the trailer side between these two circuits and they touched which caused the problem. For a new 7-way kit for the trailer you'd want the part # HS381-9000 and then for a new 7-way for the truck you'd...
    view full answer...
  • Combination 7-Way & 4-Pole Trailer Connector for 2003 Ford F-350 Super Duty
    If your 2003 F-350 has factory wiring with a round U.S. Car type connector like the one in the photo I linked for you then you can use the combination 7-way/4-pole vehicle connector # HM40975 or # 74682 which include a mounting bracket and hardware, or for a 7-way only part # A10-7072VP.
    view full answer...
    Image 1 for
  • Troubleshooting No Running Light Signal on Factory 7-Way on 2013 Dodge Ram 2500
    If the 7-way trailer socket pin for running lights on your Dodge 2500, the one at the 11:00 position as you look at the socket, has no signal and you have already checked the related vehicle fuse 29 (a 20-amp yellow) for that function then I suggest you test the wiring leading to it to find the point where the signal is lost. Apply your tester, one like # PTW2993, to the wiring that leads to the connector and move forward until you find the point where the running light signal is present....
    view full answer...
    Image 1 for
  • Replacement Trailer Connector 2018 Chevy Suburban
    I believe the 2017 Suburban came with a twist-in 7-way connector like part # PK11916. If it did use a twist-in connector, there will be a locking tab just to the left of the connector as shown in the provided photo. Push in on the tab with a small screwdriver, and the connector will pull free once it's unplugged at the rear. If it doesn't use a twist-in connector, use # A10-7072VP. There should already be a wiring pigtail in place that's plugged into the rear of the existing 7-way, or...
    view full answer...
    Image 1 for
  • Replacement 7-way for 2009 Audi Q7 and 7-way to 4-way Adapter for Trailer with LED Lights
    You are right on both counts! The correct replacement 7-way for your 2009 Audi Q7 is in fact the Mighty Cord Replacement 7-Way RV-Style Trailer Connector for Factory Tow Package # A10-7072VP. In regards to the 7-way to 4-way adapter # 47345, there is a specific one you will want to use if your trailer has LED lights, which is the 7-Way to 5-Way/4-Way Trailer Adapter for Vehicles with Lamp-Out Sensors Towing Trailers with LEDs # C35FR.
    view full answer...
  • 7-Way Wiring Kit for 1999 Ford Expedition
    For a 1999 Ford Expedition with factory-installed 7-way the replacement connector is part # A10-7072VP. For a combination 4-pole/7-way instead you could use # HM40975. Both connect with a round U.S. Car Connector like the one shown in the linked photo. If the Expedition has no factory trailer wiring you can still have a 7-way. You will start with the plug-and-play 4-pole kit # 118344 which installs at your tail light connectors with no cutting or splicing. If you need only basic lighting...
    view full answer...
    Image 1 for


< Previous
123. . .4



Do you have a question about this Custom Fit Vehicle Wiring?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Jeff D
Installed by:
Jeff D
Employee Robert C
Installed by:
Robert C
Employee Jacob T
Video Edited:
Jacob T
Employee Chris R
Video Edited:
Chris R
Employee Mary K
Updated by:
Mary K
Employee Halie H
Updated by:
Halie H
Employee Carrie F
Updated by:
Carrie F
Employee Amanda M
Written by:
Amanda M
Employee Jonathan Y
Video by:
Jonathan Y
Employee Clayton O
Test Fit:
Clayton O
Employee John A
Test Fit:
John A

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.