Summer Starts Here - Save up to 70%
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Quickly and easily install a 5-way trailer connector on your vehicle with this custom, plug-in harness. No cutting, splicing or tapping required. Ideal for towing a trailer with surge brakes. SMT construction ensures superior performance.
Features:
Specs:
Installation
This custom-fit T-connector plugs into your vehicle's wiring harness, which is located behind the rear bumper, on both the driver's and passenger's sides.
Once installation is complete, the 5-way flat connector will be stowed beneath your vehicle, near the trailer hitch. A mounting bracket (sold separately) is recommended to keep the connector secure.
It is recommended that you use a small amount of grease on all electrical connections - the plugs on your automobile and the 5-pole connector itself - to help prevent corrosion.
A tail light converter is built into this T-connector. Because most trailers run on a two-wire system - wherein the brake and turn signals are carried on one wire - the separate brake and turn signals from your vehicle's three-wire system need to be combined so they are compatible with the wiring system of the trailer. This converter combines the brake and turn signal functions of your automobile so that they run on one wire to properly activate your trailer's tail lights. Note: This will not affect how the tail lights on your vehicle operate.
Curt builds each tail light converter using surface-mount technology (SMT). This method of construction involves soldering electronic components directly to the surface of a printed circuit board. SMT eliminates the need for leads, which are used in older through-hole technology. The result is a circuit board that is smaller yet provides more routing area and that offers superior performance, reliability and durability.
Circuit boards constructed using SMT have been shown to perform better under rough conditions with excessive vibration than those made using the through-hole method. And where would vibration be more likely to occur than in towing applications? Curt converters also produce less heat, leading to increased durability and longer life. In addition, lower levels of resistance ensure better performance, especially for parts that operate at higher frequencies.
Each Curt circuit board is made using high-quality components that are pieced together in the most technologically savvy fashion, leading to greater predictability and reliability in functioning.
California residents: click here
Average Customer Rating: 4.8 out of 5 stars (40 Customer Reviews)
Quickly and easily install a 5-way trailer connector on your vehicle with this custom, plug-in harness. No cutting, splicing or tapping required. Ideal for towing a trailer with surge brakes. SMT construction ensures superior performance.
Works really great. Still have a few more towing needs but can't do that a the moment. I will be ordering some more parts when I get time. Thanks again for the great product. You will hear from me real soon.
Worked great for our truck hitch that had to be replaced to a 5 pin to match our boat trailer. Installed it ourselves. Thanks for a quality product!
The instructions were clear, and installation was simple. I ended up selling the vehicle I installed it on about 6 months after installing, but I had zero issues while it was in my possession.
etrailer is the best site to order any of you're needs trailer related. I have had nothing but fast & friendly service every time!
The trailer Hitch Wiring fits perfect on my Tacoma. No need to add wires is plug and play.
Overall, I think that the product works well and is relatively easy to install. My only complaint is that it requires the user to drill a self tapping screw for the ground wire but the ground wire length coming out of the harness is too short to attach to a ground point if the device is installed per the instructions. My preferred location for installation (which is concurred by the instructions) is behind the driver's side tail light. This doesn't present any easily accessible spots for grounding and the ground wire as provided isn't long enough to reach a good ground point. I would prefer to keep the device behind the tail light because this is the best protected from the elements. Hanging it under the vehicle exposes it to all manner of elements and potential snags.
This is a relatively minor issue but is still an issue, nevertheless. Overall, this is a good product that is easy to install.
Gabriel
12/13/2021
Still going strong after a year. No complaints.
This harness installed quickly and easily. For the premium price, it should have included the optional mount bracket. I added a wire loom to the last couple of feet for protection. I dislike the price, but didn't want to splice into my trucks wiring with a universal harness. Shipping was fast. (Be sure to mount the box behind the left taillight before screwing down the ground wire. If not, you may not have enough ground wire to allow the box to reach up behind the taillight.)
This is to praise the service I received from etrailer.com. They phoned me after I placed my order to confirm my shipping details. My product was shipped ONE day after my order was received! I loved their tracking link. It was a direct link from within my shipping notification, not a redirect to a shipper's site where one has to enter a tracking number. And the coolest part was the map that was displayed with the shipping location, my location and a cute little truck on the way. Loved it! Thanks for a great experience, I wish all sellers websites and customer service departments were as good as etrailer.com!!!!!
I have not used the product yet but I have installed it my vehicle. Since I had a 4 pin already installed the installation was quite easy.
My dissapointment is with the lack of any tape or sleeving over the wires - epecally the wire run up to the 5 pin connector where it could easily get chafed over time. I will be adding some protection there on my own as my previous 4 pin came with it.
Product works well. Double sided tape on back of “controller” let’s go over time regardless of how clean vehicle surface is before installation.
The Trailer hitch and harness came within a few days.
Everything is installed without a problem.
I plan to test it out tonight.
Thanks
Tony
Easy installation. Took me 15 minutes to knock it out. Clear, very clean, install. Thanks!!! Always get great customer care from etrailer.com!!!!
Fast shipping, quality product. EASY INSTALL!!! I have always loved that about these type of trailer kits, in and out and ready to go.
Thanks
Bobby
Timely delivery - Correct 4 pin harness - Well DONE!
Product was not correct for my vehicle. Etrailer was helpful in finding the correct product and replacing the order.
Thank you
Easy install...plug in and strap tie to existing wire harness.
Fit well , simple installation. As always awesome customer service, prompt delivery.
Easy to install and good quality
Love it
Great product - easy install on my 2009 Tacoma
Need 2 people to install. Directions were clear.
Easy to install excellent quality will order from them again
Very exacta what i need it. Thank your
Received prompt delivery. Item fit as it should and was fairly simple install. I rate excellent.
Quality products and 1st class customer service. Buy with confidence from these people.
The kit saves me so much time and hassle.
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Ted
1/23/2023
Working just fine. Mostly happy with easy installation.