Tailgater Tire Table - 33-1/2" Long x 28" Wide - Black Powder Coated Aluminum

Video Transcript for Tire Table Tailgater Tire Mount Table Review

What's up, everybody It's AJ with etrailer.com. Today we'll be checking out the Tailgater Tire Table. So this is gonna go onto your tire and set up a table wherever you go. Let's check it out. Now this tire table's gonna be for some of the bigger tires so it's gonna work with tires with 30 inch to 50 inch diameter. Now, the measurements for the table are gonna be 33 and a half inches long and then 28 inches wide.

It does have a weight capacity of 75 pounds, so just keep that in mind. Do not sit on it or stand on it, it is not a step. It is just used to hold a few things like a table, like some cups or a cooler, or even some phones. With the table cleared off, I wanna show you how it attaches. It's really easy.

You see this portion goes out and around the tire. You got that bar that goes back behind the tire so they can't lean forward on you. And then you have the two legs here that push up against the tire. They even have grip tape on the side with the tire to help it stay in place. And then we come out here to the end and we have another leg for the table to hold up this end just to add stability.

Now, let's go over how it operates. We're gonna loosen this knob here. That way I can show you how you can adjust it when I lift it up off the tire. So grab it, move it off here. And then I can show you, you can slide this in and out.

There's grip tape here on this portion too for the backside of the tire. You'll adjust it to fit the tire that you're gonna go put it on, but you can also put it down here to store so it takes up less space in the basement door. So now when we go to put the table away, everything stores in itself. I like that, stores in the table. I'm gonna show you how to adjust the leg. So that's clearly too long for that. We'll just turn the hand knob, slide it back down and see if it'll fit into that groove. Make sure it goes low enough so that our silver button will fit into this groove here. Just push that in, snaps, now it's holding it in place. We'll just leave the hand knob out alone 'cause you can't really adjust it here. It hits the bottom of the table so it's in place, not going anywhere. Then we can remove the two stabilizer legs here. Same, you push that silver button, and then it stores at the bottom of the table. Push in that button, it keeps that in place. So I like that everything stays together on this table. That way, wherever you store it, everything's gonna be there when you need it. With a condensed sound like this, it is made out of a lightweight aluminum so it's really easy to carry around and take it wherever you need. The nice thing about that being adjustable is it's not just for big RV tires. We we're able to fit it on this truck tires just fine, we just brought it in, tied it up, and even if this leg is too tall, you can put it against the tire and it sits nice and flat. Making it even easier to carry around, you can get a bag that it fits in there. It even has a pouch on the front that carries anything else you might need, maybe some koozies or whatever you use regularly with the table to have right there with you. I like keeping it all together like this and it keeps it safe when it's in storage. Overall, I really like the table. It's really easy to set up and gives you surface area to use, nice and flat for wherever you may go, you can bring it with you. Well, I think that does it. Thanks for hanging out and hope this helped..