Will HappiJac Camper Tie-Downs Fit 2008 Tundra With 6-1/2 Foot Bed & Running Boards

Question

Question:

I have an 08 tundra double cab. My running boards extend about 4 inches into the bed. Will this work

asked by: Rick B

0

Expert Reply:

I am happy to confirm for you that yes, your 2008 Toyota Tundra with a 6-1/2 foot bed and running boards that extend just under the truck bed will be able to install the HappiJac Truck-Mounted Camper Tie-Downs # LC184089.

These are the front and rear tie-downs, so along with these the only other thing you will need are compatible turnbuckles, the HappiJac Original Turnbuckles for Camper Tie-Downs # LC182898.

I have added links below to video reviews of both the tie-downs and turnbuckles for you to check out as well.

expert reply by: Kyle S

0

Answer 1

The best and most secure camper tie down system that fits your 2016 Toyota Tundra 6.5 foot bed double cab is by far the Happijac system part #LC184089. This kit attaches to the truck frame instead of to the bed which provides a much stronger and more…

view full answer...

Answer 2

I have linked the instructions for the HappiJac Truck-Mounted Camper Tie-Downs #LC184089 that fit your 2013 Toyota Tundra below. Be sure to get a set of HappiJac Original Turnbuckles #LC182898 as they are stainless steel and will last through the…

view full answer...

Answer 3

The primary advantage of frame-mounted camper tie-downs like the TorkLift #TLF2012A and #TLF3001A, which are designed to fit your Ford F-350 if it has the 6-3/4 foot bed without a step/board underneath and a factory hitch, is the stability they…

view full answer...

Answer 4

You are correct the HappiJac Camper Tie-Downs #LC182904-182971 are the correct kit for your 2013 GMC Sierra 3500 with a regular cab and 8' bed. I would highly recommend looking at the Torklift Front #TLC2215 and Rear #TLC3212 as a better option…

view full answer...

Answer 5

The support braces in the HappiJac Truck-Mounted Camper Tie-Downs #LC182860 are going to attach to the cross frame to provide support for the anchors which will bolt through the bed wall and into the braces. The rear anchors will bolt through the…

view full answer...

Answer 6

I have a great suspension enhancement system that you can install on your 2021 Toyota Tundra. The RoadActive Suspension Custom Leaf Spring Enhancement Kit #RAS34FR is going to be a great option to improve your vehicle's stability, handling, and…

view full answer...

Answer 7

Yes, the Brophy Stake Pocket Mounted Camper Tie Downs #TDSF are a universal part that'll fit most full-size, non-dually pickup trucks with straight fenders and single-wall construction, so these'll work fine with your truck.

view full answer...

Answer 8

The Replacement Foot for etrailer or Ram Electric Jacks #EJ-3520-FT has an inner diameter of about 1-1/2" and its outer diameter is 1-3/4" which is the measurement you'll need if you are looking for a replacement. This foot is designed…

view full answer...

Answer 9

I was not able to see where these tie-downs are compatible with your Tacoma. One of the notes in the specs says it is not compatible with plastic bed rails, but I may have an option that will work for you. I have atatched a link to our product page…

view full answer...

Answer 10

I have another option for you, but the HappiJac Truck-Mounted Camper Tie Downs #LC184089 you were looking at are not a confirmed fit for your 2020 Toyota Tundra Double Cab with the 8' bed, At this time there is not a custom fit tie-down set…

view full answer...

Answer 11

There really is no clear cut answer on if the HappiJac Original Turnbuckles for Camper Tie-Downs #LC182898 will work ok with fabricated tie-downs because they would not have been tested together. That being said, as long a your tie-downs fall between…

view full answer...

Will HappiJac Camper Tie-Downs Fit 2008 Tundra With 6-1/2 Foot Bed & Running Boards

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching