Summer Starts Here - Save up to 70%
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Replaces the nail head striker pin for your UWS box with a paddle handle. Works with both locking and non-locking paddle handles. 1/4" diameter pin.
Features:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi there truck and trailer owners. Today, we're going to be taking a look at UWS's replacement nail head striker pin. Your striker pin is the component that engages your latch mechanism, as we go down here, you'll see it push the latch to the side and click, boom we're in place. So, since this is the component that the latch is holding onto to keep your lid shut, if the component becomes damaged, if you get too much rust and corrosion built up on it that where it snaps off, or if it just gets bent to where it's not engaged in the latch anymore, you may need to replace it in order to get your toolbox lid secure once again.The striker pin does not come with the nut, so you will have to provide your own, it's a quarter inch with a 20 thread. We're using a nylon locking nut to ensure our stays tightened down in its desired location. This pin will work with both locking and non-blocking latch assemblies.
I recommend if you are replacing this to determine if your bracket is going to be compatible with it, if not you can pick up a bracket from etrailer here, this one is from UWS as well. They do come separately, so if you only need one you can get just the part you need but if you're replacing your entire latch assembly you'll want to make sure you get a bracket as well to put it on too.And to help you determine the best location for installing a new assembly, the striker pin is going to have a one inch strike area, that's the smooth portion here, and the whole pin is about an inch and a half in length. So that way you can choose the appropriate depth on where you need to put the pin on the lid of your toolbox.And that completes our look at UWS's replacement nail head striker pin.
Average Customer Rating: 4.7 out of 5 stars (246 Customer Reviews)
Replaces the nail head striker pin for your UWS box with a paddle handle. Works with both locking and non-locking paddle handles. 1/4" diameter pin.I chose etrailer.com due to price. I received 2 brackets and 2 stiker pins including shipping for about the same price it would have cost me for "1 STRIKER PIN" alone on amazon. So I figured I would give etrailer.com a shot. It worked out great. My $[XX] toolbox is really coming together.
Bought striker pin and bracket to replace missing parts on my Craftsman aluminum truck tool box CMXTBAD73019031. The bracket is shaped slightly differently so the bracket is offset some, however it feels solid and secure. Quick and easy repair. etrailer's price was 25% of what I was seeing elsewhere on the web. Shipping and customer service was also great. Thank you etrailer!
I was very happy to talk with you the other night. You were a life saver in finding the parts that I needed. I had been all over the past two days looking for these parts and people looked at me like I was stupid, I even showed them a picture of the parts and also showed them the part on there truck bed box that I was looking for and they still could not understand it. I did go back to two different places and gave them your web sight and they thanked me for giving them the info so they know where to look for parts that a customer needs, when they don't have it. Thank You
TOOL BOX REPAIR AND FIT AS DESCRIBED
These pins were exactly wanted i needed for my tool box. Price of pins and shipping was right on according to today's prices i would say i got a very good barging. I will always check e trailer first before i buy somewhere else because you just might have what i need. Thank you
Fits perfect, and was a great replacement for the lost pin on my betterbilt toolbox.
Truck bed tool box latch had lost pin. A GOOGLE search pulled up etrailer with perfect match of my needed item. Tool box now closes solid, no bouncing lid. Thank you.
I open up my truck bed tool box and one of the strikers that keep the lid closed is gone! The manufacturer does not sell this little part. I google it and who carries it? etrailer.com, that's who. Great price even with shipping to Oregon. I get the new striker and its a perfect fit. Problem solved. 5 stars.
It would have been helpful if the nut was included.
It worked well in getting my tool box in staying closed. It however, requires that you buy a nut and lock washer to fasten it to the tool box.
Sierra K.
5/10/2022
The mounting hardware can be found here: item # Accessories-and-PartsUWSUWS08353.html
Helpful Links
Richard W.
5/10/2023
Great. Still keeps my truck tool box tightly locked. Once tightened into its position it stays.
Excellent service- delivered on time. Good quality products.
Exactly what I needed. Creepy fast shipping. Thank you.
Would it be to hard to include the nut that holds the striker in place? I do not have the old one to get the nut from. I have a bucket of nuts and bolts and was able to install it.
Good product, easy to install. I would pay a few cents more for the nut to come with it instead of having to dig around for one.
Great product, exactly what I was looking for
This was the exact Kobalt tool box striker pin I needed. The only thing I needed was nuts, but I found those easily at any auto store. Great shipping and tracking process before shipment.
It work great!!
The right part for my box. If i need anything else i know where to go. Thanks
They worked perfect. Glad I made the purchase at etrailer
The pins are exactly what I ordered , I can’t believe the nut wasn’t included to tighten it up
They the right parts you need and easy to find and order
Works great and what a great value thanks again.
perfect replacement
fits like OEM
Perfect fit, for an older toolbox, excellent service, and speedy delivery..
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Robert
4/18/2024
After a year the latches are still working great