7/8" Fuel Cylinder Gasket for Kat's Heaters Ether Start Systems - Qty 1

Video Transcript for Review of Kats Heaters Vehicle Heater Parts - Replacement Fuel Cylinder Gasket - KH33219-1

Ellen: Hey everybody. I'm Ellen here at etrailer.com and we're going to be taking a quick look at the fuel cylinder gasket for Kat's heaters. So this is going to make sure that your fuel cylinder doesn't have any kind of leaks. If the gasket has worn out or gone bad, this is going to be a replacement for that, to make sure that you don't have any issues. So this measures about 7/8 of an inch from the outside edge. So you can see there, outside edge to outside edge or outer diameter is 7/8 of an inch.

Inner diameter is about 7/16. This does fit the automatic series, pull cable series and push button series systems on the Kat's heater ether start fluid injection system. It does require a tapered valve adapter, which is sold separately. You can find that here at etrailer.com to make sure that you can adapt your system for a fuel cylinder with a 7/8" neck. This just creates that nice seal around the fuel canister and it is made in the USA.

So, that's about it all there is to it for our look at the fuel cylinder gasket for Kat's heaters.I hope this has been helpful in deciding if this is the right replacement part for you. We do have a lot of other replacement parts and accessories here at etrailer.com. So check them out. Thanks for watching.