Summer Starts Here - Save up to 70%
Triple on/off switch for controlling lights and other applications powered by your battery. SPST, 16 amps at 125V - 250V AC, 3/4 hp at 125V - 250V AC, 10 amps at 14V (T), 3 amps at 125V (L). Fits cutouts measuring 1-5/8" tall x 3-5/8" wide.
Features:
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi there. I'm Michael with etrailer.com. Today we're taking a look at the JR Products: Triple Rocker Switch. This is going to give you the ability to control up to three lights or other applications that are powered by your battery. Each switch is an SPST switch capable of handling 16A at 125V to up to 250V of alternating current or three, fours horsepower to 125V to 250V alternating current. 10A at 14V or 3A at 125V.
To get this installed, it's going to be very easy. Your cover pops off and you're going to have these mounting holes that you can use a screw into your wall. The hardware does not come with this kit. You will have to provide that yourself. And on the back we've got our posts to connect our wires to.
So it's going to be very easy to get this hooked up. The cutout dimensions given by the manufacturer are an inch and five eights and sorry. one in five eights inch tall by three and five eights in twine. I'm going to disagree a little bit. I would say at the minimum, you're going to need about three and a half inches wide.See that little box there, three and a half inches wide by probably about an inch and a half tall.
There's the minimum that you would need. The maximum you could go up to would probably be. You don't want to go farther than your mounting points here. And those are from center to center, they look no doubt, two and three eights of an inch tall and two and three eights of an inch wide. So you want to make sure that you're still going to have enough room to put those screws in so that this will attach to the wall.
Your mounting plate will cover it and you won't be able to see those screws. So it'll work well for you. This is white. We also have a black option, if that fits your interior colors better. You can find that here at etrailer.com as well. This is made in the USA and that's going to complete our look at the JR Products: Triple Rocker Switch.
Average Customer Rating: 4.9 out of 5 stars (7 Customer Reviews)
Triple on/off switch for controlling lights and other applications powered by your battery. SPST, 16 amps at 125V - 250V AC, 3/4 hp at 125V - 250V AC, 10 amps at 14V (T), 3 amps at 125V (L). Fits cutouts measuring 1-5/8" tall x 3-5/8" wide.
Our 2011 Montana came from the factory with the switches for the interior ceiling lights and exterior porch lights inside a small door. We didn't like having to open that every time we wanted to turn on/off the lights. So I bought these switches and placed them on a interior wall that was easily accessible when we walked in to the camper. We are very happy with the results.
Works great.
Excellent quality as advertised. Fast shipping to Canada.
Thank you etrailer
Exactly matches the original switch pack, except these switches work!!
Shipping was quick and easy. Switch was installed in 5 minutes.
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.