To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Install your Curt electric trailer brake controller quickly and easily with this custom wiring adapter. Simply plug one end of the adapter into your brake controller and then plug the other end into the built-in port beneath your 's dash.
Features:
To install your Curt electric brake controller, you need to connect the wiring of the controller to your vehicle. Certain auto manufacturers offer pre-wired options, typically known as tow packages, wherein wiring is run for you from the dash to the trailer connector on the back of your vehicle. When this is done, a port is installed at your dash so that you can easily plug in a brake controller.
This adapter plugs into the port on your vehicle's built-in brake control wiring harness. The harness is located underneath the dash, to the left of the steering column, and it is taped to another harness near the emergency brake pedal.
No hardwiring is required to install this adapter. After you plug it into the factory port, you simply plug the other end of the adapter directly into your electric trailer brake controller. Because there are no wires to connect, installation is not permanent. You can unplug and remove your brake controller at any time to transfer it to another vehicle or securely stow it away.
California residents: click here
Average Customer Rating: 4.9 out of 5 stars (47 Customer Reviews)
Install your Curt electric trailer brake controller quickly and easily with this custom wiring adapter. Simply plug one end of the adapter into your brake controller and then plug the other end into the built-in port beneath your vehicle's dash.The Curt Custom Wiring Adapter for the 2017 Honda Ridgeline worked perfectly for the installation of my new Curt Spectrum Trailer Brake Controller. Thanks etrailer!Thanks Curt!
Have an installed it yet but it looks good thanks for the thanks for the fair shipping
Just finished the install. It was nice to be assured that I had everything I needed to finish the job before I got started. Honda didn't make it easy.
Installed the Curt Triflex in 2018 Honda Ridgeline RTL-E and was completely easy with the C51392 Honda specific wiring adapter that plugged into the Honda pre-wiring just above and left of the emergency foot brake as you look at the pedals. Like how the controller fits nicely in front of the shifter flat on the center console storage tray with a bit of Velcro to hold it and prevent movement in transit and matches the black interior trim well (didn't use the metal bracket that came with it). Have had great luck with Curt products (hitches, adapters, etc.) and this product is very well thought out. Too early to tell about long term use though.
This part is listed to fit a 2019 Honda Pilot. I needed one for a 2019 Honda Passport;(basically the same vehicle); however since the Passports just came out in about February no one could tell me if it would work on the Passport. So I took a gamble and ordered this wire. Well I can confirm that this part does work on the 2019 Honda Passport. The hardest part was reaching the plug under the dash and getting this wire to plug into it, all without any room and only being able to get one hand up under dash. Wire made hooking up brake controller a lot easier than direct wiring.
This fit my 2019 Honda Pilot perfect. Plugged right in under the dash. The plug branches out of another wiring harness directly above your OBD plug in. On the left side of dash. You will have to lay down and get your head near the pedals to see it tucked up in there. Very easy install, glad I went with etrailer. Made it simple.
Worked great I installed my brake controller in new truck in no time. On line instructions were great workout perfect.
Thanks for the video. Worked great
Thanks to Adam for assisting in an overnight delivery and ev”also sending an email when it delivered next day so I knew immediately.
Delivered faster than advertised. Took me much, much longer to FIND the Ridgelines connector. Once I going that, it took about 25 minutes to put on and secure the wires
Customer
1/21/2018
Everything about the buying experience has been great! I was impressed with the email communication and the actual phone call to let me know that my ordered had been shipped out. I will be using the etrailer.com website again to make purchases for my trailer and camper accessories! Thanks!
Great no problem
Reynaldo S.
8/6/2020
Great
Fast shipping simple to install on my ridgeline and pilot exact fit with the pig tail
This is a great product. It took about 10 minutes to install with the well illustrated instructions showing exactly what needed to be done. Plug and play and on the road!
The adaptor cable fit perfectly into my Honda Pilot and I had no issues with it what so ever. Great technical help is also available from etrailer. I've purchased from them before and they always do a great job.
excellent connector. Just the right le ngth
Purchased this controller for limited use.
Really like the vehicle specific plug adaptor that came with it. Makes for a quick clean install.
Clean compact design and easy to use.
I was surprised - completely plug and play! Easy to install
I haven't installed it yet, but the transaction was easy and received product right away.
Mike S.
10/16/2018
It has worked great
Perfect adapter so you don’t have to splice into your wiring
Perfect fit
Made this really easy
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Michael
9/8/2021
The Curt Spectrum Trailer Brake Controller has been working flawlessly. I am pleased that the custom harness made the install so simple.