Optronics Rectangular Submersible Trailer Tail Light Installation Video

In order to replace the taillight on a Trail Star Trailer you'd simply find one with the same style (shape/function) and then choose the correct replacement based on size. There are several types of Trail Star Trailers so it would be difficult to…

I checked with Ranger and the current generation of the Trailer RT188 uses the 6 inch oval tail lights. For those the Miro-Flex Trailer Tail Light #STL22RB is a great option for an LED upgrade. These lights use pigtail #A47PB and will fit the mounts…

I looked up some photos of a 2000 TrailStar Bass Tracker Pro Boat Trailer and it most likely uses either the Optronics Combination Trailer Tail Light part #ST16RB for passenger and part #ST17RB for driver side or the Optronics Combination Trailer…

The older generations of the Wesbar submersible low-profile lights came with sealed light bulb capsules that are not replaceable. If your capsule is sealed, then your best option is to replace the lights with new lights like part #403026 and #403076.…

We have exactly what you are looking for. The replacement light we offer that will work for you is part #ST16RB. This is listed as an exact replacement for the Wesbar 3554 light on your trailer, which is the passenger side of the trailer. if the…

You are correct in that the OPT of the part number stands for Optronics. What you would want is the part #STL16RB for the passenger side replacement light and the part #STL17RB for the driver side. The STL18 is no longer around but the lights I…

A great choice for your boat trailer is the LED Trailer Light Kit for Trailers Over 80" Wide #TL16RK. This kit includes 2 tail lights which serve 8 functions (Stop, turn, tail, side marker, rear clearance, side reflector, rear reflector, and…

If so equipped, the collective of circuits that make up the tow package is protected by 6 different fuses that protect the various circuits. The fuses are located in the power distribution center located in the engine compartment near the battery.…

I attached a picture that shows what type of lighting requirements are needed for a trailer over 80 inches in width as well as a link down below that covers this as well.

I went out to the warehouse and pulled a 35 ft. Wishbone 4-Way Trailer Wiring Harness, #A35W42B, and used a wire gauge tool to measure the wires. The copper wire itself is 20 gauge. If you measure the wire with the insulation on it then it is thicker…

A trailer that is over 80 inches wide is required by DOT regulations to have rear clearance lights. An over 80 inch taillight kit, like part #TL16RK, will have the side clearance light built into it. An under 80 inch taillight does not have the…

I pulled up some pictures of the 2020 carry-on 6ftx12ft dump trailer online and based on what I could see the taillights are the part #STL2RB for the passenger side and #STL3RB for the driver side.