CE Smith Keel Rollers Adjustable Mounting Brackets Installation Video

I went out in the warehouse and pulled the Redline Grease Seal, part #13194. It does have the markings on the inside of the seal that say TCM 13194 TM Taiwan and the number 11. It also has the spring around the inside lip. This seal will work for…

I am not familiar with the exact bow stop you have pictured but we do carry a few options such as the Yates Flat Bow Stop for Boat Trailers part #YRJONBLOCK which is what I recommend using. It's designed to be used with a bracket such as the…

The diameter of the mounting bolt hole on the CE Smith Bow Roller Bracket for Winch Stands, #CE31005PG, is .45 inch. The bracket uses a 5-1/4 inches long x 1/2 inch diameter steel shaft for attaching the roller/Y-stop, which is part #CE10700A. The…

The Yates Y-Style Bow Stop #YR333Y that you referenced features a 6-1/2 inch span. The closest Y-Style bow stop we have available to your current unit is the Yates #YR4Y22-3 which features a 4 inch width between the "Y" contours. It has a 2…

For your 3 inch bow stop, I recommend Yates Y-Style Bow Stop for Boat Trailers - TPR - 6-1/2" Span - 1/2" Shaft - Yellow, #YR333Y. This is a thermal plasticized rubber so it will not leave any marks on your boat hull. The base is 3 inches…

You will only need one keel roller assembly, and I recommend the CE Smith - which is also made in the USA - because they come with a full assembly as opposed to having to piece together parts, which can be more costly. You only need to choose the one…

The rubber keel roller #CE32003G does not have a weight capacity though it is designed to support the added weight of heavier boats. At any given time, it is not likely that any one roller will have to support the entire weight of the boat so it is…

We do have a couple of bolt-on spring hangers #CE14017G and #CE14016G but they are designed for slipper springs and not double-eye springs like #e77SR. Its not likely that professional welder would charge that much. You might be able to find one…

The Yates Keel Roller for Boat Trailers part #YR1200B is just what you are looking for. It's blue in color and has the roller design you are looking to add which will assist in centering the boat on the trailer. In order to install this you will…

The Yates Flat Bow Stop, #YRJONBLOCK, requires a 1/2 inch diameter shaft like #CE10700A. The bracket you mentioned, #CE32004G, takes a 5/8 inch diameter shaft so a 1/2 inch diameter will fit but it will be loose. Out of the parts that we carry this…

The brackets we recommend for use with the Fulton trailer fenders part #F008563 are the CE Smith brackets #CE26098G-2.I attached a picture that shows how these brackets normally hold fenders on. Essentially you put the L up into the top of the inside…

The correct roller and shaft with Pal nuts for the #YR10000 roller is the #CE10726A. Without knowing the dimensions of your shallow V beam it would be hard for me to tell you exactly which bracket will work for you. Two of the most common mounting…