Customers compare EQ37120ET to these similar products
Products Featured in this Video
Hello neighbors. It's Brad here at Etrailer. And today we are actually at Ozarks International Raceway. And we're enjoying some beautiful cars and some track sounds all throughout the day. And we're here with Tom. Tom's got an equalizer weight distribution hitch on his truck.… see more >
Info for these parts were:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
It does appear you are going to be able to flip the axles on your 2023 Northern Spirit 2145RBX using 2 of the Dexter Trailer Springs Over-Under Conversion Kits #K71-384-00. I will warn you Kalvin this will raise the height of your camper roughly…
view full answer...Thanks for the pictures! No, I am sorry Richard you can not. The B&W Continuum item #BW78FR only works with frames that are 5" and 6" tall. Instead, I recommend using the Equal-i-zer Weight Distribution System w/…
view full answer...Yes, the TrackTowers part #Y52AV does fit into Yakima HD tracks like what you have installed on your trailer.
view full answer...The best way to pick out a weight distribution system is to base it off of the loaded tongue weight of the setup when it is loaded and ready to tow. This figure also includes the weight of any cargo behind the rear axle of the tow vehicle. I…
view full answer...We do have parts available for the 2024 Toyota Tundra 4WD models so we can definitely set you up. For an air bag kit I recommend the Air Lift #AL84JQ. These are the 5,000 lb capacity air bags. They will help level your ride and improve overall…
view full answer...By "slider track" I believe you are referencing the hinge; if you take a look at the accompanying photo you should be able to see what I am talking about. That should be what your Fan-Tastic vent has and since your model…
view full answer...For your setup I recommend the TrackTowers for Yakima Crossbars and Platforms - Track Mount #Y52AV which includes everything you need to mount Yakima crossbars to your Retrax cover (unless you plan on using the Round or HD bars - then you'll…
view full answer...An underslung trailer coupler is one that attaches to the bottom of the trailer frame and an overslung one is one that attaches to the top of the frame. Measuring is not required if you just take a look at your coupler and see where it attaches to…
view full answer...For a 5000-lb travel trailer with tongue weight (TW) of 450-lbs you can use a weight distribution/sway control system such as the Equal-i-zer 4-Point Weight Distribution System #EQ37060ET which works effectively over a range of trailer TW from 200-…
view full answer...The standard spring bar brackets in the Equal-i-zer 4-Point Weight Distribution Systems #EQ37140ET and #EQ37120ET will fit trailer frames up to 6-inches in height as you noted. There is no alternate part or adapter to allow these systems to be…
view full answer...You do have a very interesting situation. When it comes to aluminum trailers we always defer to the manufacturer whether it is just a utility trailer or an RV trailer like your toy hauler. Aluminum frames can't always withstand the pressure…
view full answer...I checked with the manufacturer and confirmed that the Longview Custom Towing Mirrors #LO54FR do fit the new body style of the 2019 Chevy Silverado 1500. In regards to the best fit, it is the Longview as they are custom made for this truck and have…
view full answer...