Customers compare HP29FR to these similar products
Products Featured in this Video
Ellen: Hey everyone, I'm Ellen here at etrailer.com and we're going to be taking a quick look at the single axle trailer fender with backing plate. So this is a really great way to protect any drivers on the road from any kind of debris getting kicked up or slung up underneath your tires and causing any issues with them, but also it's going to… see more >
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
We do have a couple options for trailer fenders that are close to 29-1/2" long, 13" tall and 9-1/2" wide, and I'll go ahead and list them out, as well as their dimensions: - 31.3" long x 9.7" wide x 12.75" tall:…
view full answer...Surprisingly enough, we don't offer a cap that would slip over the 7-way connector on your trailer and protect the contacts from the elements. A light coat of dielectric grease, part #11755 would act to exclude moisture form the connector. To…
view full answer...You Pace American JT610SA enclosed trailer should have a single axle with 14" wheels so the CE Smith Single Axle Trailer Fender #CE17900G would be a great replacement. We don't carry the diamond plating that you need but you can find these…
view full answer...I am not aware of any load inflation chart for the Westlake ST225/75R15 Radial Trailer Tire part #LHWL304. These charts are only available for select trailer tires, the Goodyear Endurance is the only one I know of. Therefore, you'll want to fill…
view full answer...I can end this debate for you real fast! Trailer tires, which will have an ST in front of the size, should always be inflated to the maximum psi indicated on the tire. Trailer tires usually do not have a recommended and maximum psi indication so I am…
view full answer...I do have an option for you but the Pro Series Round, Pipe-Mount Swivel Jack w/ Footplate part #PS1401420303 does not include a grease fitting for easy greasing. I recommend Round, Pipe Mount Swivel Jack w/ Footplate - Weld On part #TJP-7002S-B which…
view full answer...The overall height of the Round, Pipe Mount Swivel Jack #TJP-5001S-B is 16-3/4 inches when fully retracted and 26-3/4 inches when extended. Basically from the center of the pipe mount to the top of the jack measures 6-1/2 inches.
view full answer...You will want the Replacement Passenger Side Fender for Roadmaster Tow Dolly 2000-1, #RM-921003, for your Roadmaster Tow Dolly with Self-Steering Wheels and Electric Brakes - 4,380 lbs #RM-2050-1. The Replacement Driver's Side Fender for…
view full answer...The Dexter Trailer Hub Assembly you referenced, part #AKIHUB-440-2-1K is known as an idler hub. An idler is a hub that is no provisions for trailer brakes. It has no brake drum. Part #8-276-5 is an example of a hub/ drum that has a brake drum that…
view full answer...I apologize for any confusion, but the correct passenger side replacement for a Demco Kar Kaddy SS is the part #DR74FR for the passenger side. This has the LED light on the front of the fender like you mentioned.
view full answer...Great question. As a general rule, when your trailer is loaded to it's full capacity, there should be a minimum clearance of 3 inches between the top of your tire and the underside of your fender.This should give you adequate clearance for…
view full answer...Square and rectangular axles do not have the capacities listed based on their dimensions. It can be tough to determine what the capacity is, especially since Snowco is no longer in business. We can get close to the capacity if you can give me some…
view full answer...