Single Axle Trailer Fender for Enclosed Trailer - Ribbed Steel - 15" to 16" Wheels - Qty 1
(2518 reviews)
Price: $94.72
In Stock
Single Axle Trailer Fender for Enclosed Trailer - Ribbed Steel - 15" to 16" Wheels - Qty 1
Item # HP46FR
Our Price: $94.72
In Stock
Need help with installation?
Locate installers near me- All Info
- Reviews (2518)
- Q & A (0)
- Photos
etrailer Trailer Fenders - HP46FR
- 15 Inch Wheels
- 16 Inch Wheels
- For Single-Axle Trailers
- 36 Inch Long
- Steel
- Bolt-On
- Weld-On
- 13 Inch Wide
- No Step
- etrailer
13" Wide x 36" long x 20" tall. This sturdy, rounded fender has a flat back to mount flush with your enclosed trailer. Ribbed, 16-gauge, cold-rolled steel is durable. Bolt or weld onto your trailer.
Features:
- Rounded fender covers 1 tire on your single-axle trailer
- Blocks road debris from hitting other vehicles and helps protect your trailer's cargo
- Flat mounting flange on inner edge lets you mount fender flush with your enclosed trailer
- Close fit keeps dirt from building up between the fender and trailer
- 1" Wide outer edge is rounded
- Ribbed, 16-gauge, cold-rolled steel is tough and sturdy
- Prime and paint the fender to get corrosion protection and to match your trailer's finish
- Weld-on or bolt-on installation
- Requires drilling and purchase of mounting brackets (sold separately) for bolt-on installation
- Made in the USA
Specs:
- Application: single-axle trailers with 15" to 16" diameter wheels
- Dimensions: 36" long x 13" wide x 20" tall
- Quantity: 1 fender
- Weight: 12 lbs
- 1-Year limited warranty
Tips for Replacing and Installing Trailer Fenders
- Do your best to match the dimensions of the new fender to your old one.
- If a fender was damaged during a blowout, use the opposite fender to get the dimensions.
- As with all trailer maintenance, don't forget to chock your wheels before getting started.
- For a bolt-on fender, use your existing mounting hardware, if possible.
- The old mounting bolts or screws might be stripped or rusted, in which case you'll need to tap them out and buy new hardware.
- If removing an old, welded-on fender, either carefully chisel it off yourself or take your trailer to a weld shop to have the fender professionally removed.
- Don't forget to prime and paint the new fender to keep it from rusting (and to match your trailer's finish).
- Before you start drilling, position the fender where you need it and center it over your wheel well.
- Mark where you need to drill (measure twice, drill once).
- Don't tighten down the mounting hardware completely until you're sure the fender is mounted correctly.
MFS00498 Single Axle Trailer Fender - 90-Degree Back - Cold Rolled Steel with Ribs - 15" to 16" Wheels - Quantity 1
Customer Satisfaction Score:
95% were satisfied with this product
5% of customers were not satisfied
- Wrong item was ordered
- Arrived Damaged
- etrailer mistake
Customer Reviews
Single Axle Trailer Fender for Enclosed Trailer - Ribbed Steel - 15" to 16" Wheels - Qty 1 - HP46FR
Average Customer Rating: 4.8 out of 5 stars (2517 Customer Reviews)
13" Wide x 36" long x 20" tall. This sturdy, rounded fender has a flat back to mount flush with your enclosed trailer. Ribbed, 16-gauge, cold-rolled steel is durable. Bolt or weld onto your trailer.by: Van12/26/2023
The fender worked well for my custom ap plication
by: Jesse03/01/2023
Worked great. snug but fits 275/75/r18 (~33in) tires so I can match my tow vehicle. overlanding trailer build. Originally done in exterior black semi gloss. After chipping following 3k mi swapped coating to primer + two coats of truck bed liner which has adhered really well. Durable. When well supported they can work as a step for me. I did mod them to bring them down in width to form better for my application (would have been too wide, extending 3in past the tire). Responded well to being trimmed. Applied typical rubber-coated 1/8in edge trim to cut side where that met the trailer wall. While not precisely the right item for my unique/custom application, its durability and workability to fit my project was great.
by: Ray02/16/2024
They will work wonderful, but sorry they not going on a trailer. They will be the inter fender wells for racecar being built to run almost 300 mph at the Bonneville Salt Flats. The workmanship is second to none. From the time of ordering online to receiving them was almost has fast has the car will be. Thanks Ray
by: Steven 05/27/2024
Delivered an excellent product as described. Would order again
by: Tony 02/14/2024
E trailer always does a good job!
by: Zachary 07/18/2023
Quality merchandise...fast shipping
by: Lawrence 11/04/2020
The fenders arrived in record time! Shipped to me quickly with tracking number provided and constant updates. I have and will continue to be a etrailer customer for as long as their customer service and accurate shipping times continue and their inventory continues to be of high quality. Thanks!
by: Joshua 09/29/2022
Worked perfectly for my equipment trail er
by: Robert 07/29/2022
so far everything I got from etrailer is looking really good!
by: Alan 01/12/2023
I am actually using these fenders to make wheel tubs for my 62 Ford Fairlane 500. they are a great fit and require very little modifications.
by: Luc03/08/2022
Excellent quality, well built !
by: Earl 01/12/2021
Great and friendly service, quick delivery too! Thank you, Earl
by: Kirk 07/24/2022
Very fast delivery.
by: Wendy 12/12/2023
by: Frank 02/02/2023
by: Louis 05/01/2021
by: Jeff 08/30/2023
by: Jose 04/02/2023
by: Donald05/29/2023
Very well made. I added some more bar tacks to bond the backing plate to the fender. It probably would have been fine as is, but for three minutes of effort I know that the two won't separate. I built a T out of 1" tubular steel to mount it to the trailer and there is no flex, once I welded it all together. Arrived clean enough to paint (but I still wiped it down with isopropyl alchohol before painting).Nice heavy gauge fender.
by: Jerry05/06/2022
These Trailer Fenders are a quality product which are "rust free". It's hard to find an 8" rust free wheel fender on-line. All stainless steel fenders listed on line require you to paint them so they will not rust. This is because since they were stamped/pressed via large machine press at the manufacturing plant, using a flat sheet of stainless steel. When the sheet is pressed it's damaged and will rust.
by: JO12/30/2022
I used these steel fenders to replace aluminum fenders on my utility trailer after one had fallen off along the road somewhere. Prior to installing these I painted them with Krylon Fusion gloss hammered metal spray paint, which has held up well.
by: Joey03/13/2024
Great looking and functioning fenders. Really thought I would never find fenders for a 1993 boat mate trailer that would fit but these fenders fit great. Sure made my trailer look better.
by: Fredrick02/24/2024
These fenders were to replace the rusting out fenders on my Four Winns boat trailer. They really spruced it up! The only "modification" I had to do was add an extra 3/8 nut on both sides between the fender and the trailer frame to make it fit. I used all new stainless steel fasteners.
by: Ryan R08/02/2023
I put two of these fenders on my canoe trailer. Both broke before I'd gone 1,000 miles.
25
2511
Show More Reviews
See what our Experts say about this etrailer Trailer Fenders
- 13 Inch Wide Fender Replacement RecommendationFor you, we have the Single Axle Trailer Fender for Enclosed Trailer - Ribbed Steel # HP46FR which measures 13" wide, 36" long, and 20" tall; and would make a great replacement.
view full answer...
- Recommended Trailer Fender That is At Least 12" WideI do have an option though none of our current trailer fenders measures exactly 12" wide. That said, we do have a few models that are 13" wide being the Single Axle Trailer Fender part # HP66VR and the Single Axle Trailer Fender part # HP46FR.
view full answer... - What Materials is Single Axle Trailer Fender for Enclosed Trailers - 15" to 16" Wheel Available InThe Single Axle Trailer Fender for Enclosed Trailers - 15" to 16" Wheel is not available in aluminum; it is only available in Steel # HP66VR or Ribbed Steel # HP46FR.
view full answer... - Replacement Fender for 2016 R-Pod 178When replacing the fenders on your 2016 R-Pod 178 you want to choose a replacement that is as close as possible to your existing fenders. Although slightly shorter, the Single Axle Trailer Fender for Enclosed Trailer - Ribbed Steel - 13" to 15" Wheels - Qty 1 # HP66FR may still work for you. This fender is 36" long x 10-3/4" wide x 20" tall. It is designed to fit 13" to 15" diameter wheels. As long as you have wheels this size so you won't have a clearance issue and these will work as...
view full answer... - Availability of Single Axle Trailer Fender for Enclosed Trailer Without Ribbed SteelYes, we do have the equivalent to the # HP46FR without the ribbed steel. The Single Axle Trailer Fender for Enclosed Trailers # HP66VR has the same dimensions but is smooth instead of ribbed.
view full answer... - Fenders Needed for 16 Wheels on Escort Boat TrailerThe fenders we have available that are compatible with 16" wheels are parts # HP46VR and # HP46FR which are 16 gauge steel and can be either welded-on or bolted on. Keep in mind the fenders are not pre-drilled and the required mounting brackets for a bolt on installation are sold separately as part # CE26098G-2. Unfortunately we don't have any plastic fenders like what you were looking at that fit the larger 16" wheels.
view full answer... - What Is The Largest Wheel That Can Be Used In The Fender HP46FRAs the overall length of the fender is 36 inches, the radius will be 18 inches. However, this should not be used with 18 inch wheels and is designed to accommodate 15 inch to 16 inch diameter wheels. The extra space is needed for the wheels to move when hitting bumps and things while in use.
view full answer... - Replacement Single Axle Trailer Fender for 16 Inch Wheels The closet thing we would have to those dimensions is the Single Axle Trailer Fender for Enclosed Trailer - Ribbed Steel - 15" to 16" Wheels item # HP46FR. The dimensions are 36" long x 13" wide x 20" tall.
view full answer... - Trailer Fender that is At Least 12 inches WideWe have a couple 13 inch wide fenders available with the part # HP66VR which is smooth or the part # HP46FR which is ribbed. The length of both of these is 36 inches.
view full answer...
Do you have a question about this Trailer Fender?
Info for this part was:
Edited by:
Lindsey S
Installed by:
Kathleen M
Written by:
Alexander C
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.