How To Find Boat Trailer Rectangular Axle Capacity For Snowco Trailer
Question:
Hello, I just recently acquired a Snowco boat trailer. The axle is 1 1/4 x 2 1/2 rectangle. The wheels are 205 70 r 14 . on a 5 on 4.5 bolt pattern. what would the axle capacity be? Hard to find info on this old trailer, no markings or plates left on the axle just the old name on the fender under the rust. any help would be appreciated.
asked by: Brian
Expert Reply:
Square and rectangular axles do not have the capacities listed based on their dimensions. It can be tough to determine what the capacity is, especially since Snowco is no longer in business.
We can get close to the capacity if you can give me some more information. We would need the bearing numbers. If you remove the wheel and hub you can typically find the bearing number on the bearing in the location noted in the attached photo.
If you are unable to get the number off the bearing you can use a digital caliper like part # PTW80157 and take some measurements on the spindle where the bearings and seals ride.
I have attached a link to our product page you can check out. Just use the filters on the page to find the hub by choosing the right bolt pattern and bearings.
Products Referenced in This Question
4" Carbon Fiber Digital Caliper
- Hand Tools
- Measuring and Layout Tools
- Digital Calipers
- Carbon Fiber
- Performance Tool
more information >
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 6,000-lb Axles - 6 on 5-1/2
- Trailer Hubs and Drums
- Hub
- Standard
- 25580
- 15123
- For 6000 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- 18 Inch Wheel
- 18-1/2 Inch Wheel
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: How to Accurately Measure Trailer Leaf Springs
- Shop: 2-Leaf Slipper Spring w/ Radius End for 1,000-lb Trailer Axles - 24-5/8" Long
- Search Results: 26 slipper spring
- Shop: Dexter Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2
- Shop: Dexter Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Video: Review of Dexter Trailer Hubs and Drums - Hub - 34822545BX
- Search Results: hubs
- Search Results: 28 leaf spring
- Search Results: axle
- Search Results: 2500 lb axle
- Search Results: dexter hub
- Search Results: dexter
- Shop: 3-Leaf Slipper Spring w/ Radius End for 1,500-lb Trailer Axles - 24-5/8" Long
- Shop: 3-Leaf Slipper Spring w/ Radius End for 1,500-lb Trailer Axles - 24-5/8" Long
- Shop: 2-Leaf Slipper Spring w/ Radius End for 1,000-lb Trailer Axles - 24-5/8" Long
- Q&A: Difference Between an Idler Hub and a Hub/Drum
- Video: Review of etrailer Trailer Fenders - Single Axle Fender with Backing - HP29FR
- Shop: BT8 Spindle for 2,000-lb Trailer Axles - 1-1/4" Diameter
- Video: Review of Kenda Trailer Tires and Wheels - Karrier ST205/75R15 LR C Radial 15 Inch Aluminum - KE27JR
- Q&A: How to Determine Max Wheel Diameter for an Idler Hub
- Q&A: Replacement 7 Spoke Aluminum Trailer Wheel for Aluma Trailer
- Q&A: Trailer Hub To Spindle Combinations for 2000 Pound or 3500 Pound Axle
- Q&A: What is Difference Between Trailer Bearings L44649 vs L44643
- Q&A: Replacement Hubs and Bearings for JetSki Trailer
- Q&A: How to Choose Correct Replacement Trailer Idler Hub