Review of Ultra-Fab Products RV and Camper Hitch - RV Bumper Mount Hitch - UF35-946402 Video

I do say those welds are bad and it appears the bumper is simply welded onto the back plate of the trailer rather than the frame. I recommend removing the entire bumper for the Mount-n-Lock Heavy-Haul'r Replacement RV Bumper #MNT43VR which you…

I have attached a video below where Ellen goes over exactly how the 25' Awning Tie-Down Kit #3729253 is installed.

The RhinoFLEX RV Sewer Hose Extension with Swivel Lug and Bayonet Fittings #CAM39765 and similar items do have removable orange fittings but there are not replacement parts available. If you have the fittings then you just need the hose #CAM39671. If…

Since it looks like you have C-channel on your 2021 Winnebago Micro Minnie FBS Comfort Explorer you'd have to find a welder to box the frame so that you can then install the Mount-n-Lock SafetyStruts #MO22FR that you referenced but it can fit.

I had our warehouse measure each of the front mount trailer hitch receivers you mentioned, and the dimensions are as follows. The Curt #31408 measures 32-3/4" long x 8-3/4" wide, the Draw-Tite #65080 measures 36-3/4" long x…

There is a way to find where the end of the hitch receiver will sit once installed on your 2011 Toyota Tundra, but we have not had a chance to install the Curt Front Mount Hitch, #31198, on a 2011 Toyota Tundra yet, so I do not have a specific…

I reached out to my contact at Jayco regarding your 2019 White Hawk and she said that it actually depends on the specific submodel and any options that may have been added at the factory as to whether the pre-wired setup is connected to a constant…

The Dexstar Steel Mini Mod Trailer Wheel #AM20363 that you referenced has a 0 offset. I attached an FAQ article on trailer tires for you to check out as well.

The wheels for your ST215/75R14 sized tire on your 2022 Coleman Lantern 17B are 14" X 5-1/2" wheels with a 5 on 4-1/2 bolt pattern. The Karrier ST215/75R14 Radial Trailer Tire with 14" Galvanized Wheel - 5 on 4-1/2 - Load Range C, part…

The width of a trailer wheel is measured from the inner edge of a bead to the inner edge of the other bead. If you take this measurement it should be 5 inches on your wheel. Take a look at the video I have linked that shows how to measure. You can…

I have the 215/75-14 Load Range C in a Bias Ply tire as part #AM3S560 or in Radial as #AM32182. We don't offer the 215/75-14 Load Range D as a wheel/tire combo, but you can purchase them separately and have them mounted at a local tire shop.…

The speed rating for Kenda tire and wheel combo #AM32182 is M at 81 mph.