Customers compare 34822545BX to these similar products
Products Featured in this Video
Today we're going to take a look at the Dexter Trailer Pre-Greased Idler Hub Assembly for a 2,000 pound axles, with the five on four and a half inch bolt pattern. Now this is a pre-greased idler hub, which is easy to install, so there's no need to pack bearings with grease. Comes all pre-greased. The bearings are all installed, and their pre-seal is pressed into place, so it's ready to put right… see more >
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
The hubs that come with the #e82GR axle are packed with a Lithium complex multipurpose grease. It is safe to add marine or equipment grease, as long as it is another Lithium Complex grease. We recommend using something like the Timken Hi-Temp Red…
view full answer...The trailer hub assembly, part number, 34822545BX, comes with the race attached to the hub. The seal and bearings are not attached. Those parts must be assembled and packed with grease prior to installing the cap. I have attached a FAQ sheet for…
view full answer...Though we do have the replacement bearings, races, and seals available for your Hadco 3109 hub (which I have listed below), the combination used will not have an equivalent replacement hub available, unfortunately. Replacement Trailer Hub Bearing…
view full answer...A BT8 spindle would have a diameter of .99 of an inch where the bearings would both install and would have a diameter of 1.24 where the great seal would ride. That would require a hub part #AKIHUB-440-2-1K for an idler hub. A BTR spindle would have…
view full answer...An 8 inch tire is perfectly fine for a motorcycle trailer. It will probably be easier on the bike. A couple of things you mentioned do wave red flags. First, tire pressure. Trailer tires should always be inflated to the maximum psi as indicated on…
view full answer...The 205/50-10 is the modern replacement size for the 20.5x8-10 tire. The #AM3H454 wheel/tire combo you specified has a 1650 lb per tire capacity. My research indicates that the 20.5x8-10 Load Range F tire had a 1765 lb per tire capacity which is…
view full answer...The Kenda 205/65-10 Bias Trailer Tire with 10" Galvanized Wheel part #AM3H440 has a maximum speed rating of 65 mph. In order to obtain a higher speed rating you will need to upgrade to a substantially larger tire size like the Karrier…
view full answer...The modern day equivalent of a 20.5 x 8-10 tire is going to be a 205/65-10. The dimensions are as close as you can get to the old size. We have several tires and tire and wheel combos in this size with various bolt patterns (if a wheel is needed).…
view full answer...We have the part #AM3H454 which matches the criteria you mentioned. It is a 20.5 x 8 - 10 tire Load Range E mounted on a wheel with a 5 on 5 inch bolt pattern.
view full answer...In the tire size and bolt pattern size you need we only have white wheels. The bolt pattern you have is not the most popular so that's why the options are a bit limited. So you would need the part #AM3H454 which has the correct tire size and…
view full answer...The 205/65-10 and the 20.5 x 8-10 would be very close in size. Assuming that 20.5 is the diameter of the tire and 8 is the width. The Kenda 205/65-10 Bias Trailer Tire with 10 inch White Wheel, #AM3H390, for example, is 8.3 inches wide with a…
view full answer...The grease for the Dexter Trailer Idler Hub Assembly for 2,000-lb Axles #34822545BX is a lithium grease like the Dexter Multi-Purpose Lithium Grease #DX64TR. The hub comes pre-greased so you do not need at add any more when installing. Then in…
view full answer...