Trailer Hitch Fits Recommended for 2013 Subaru Crosstrek

Question

Question:

Do you have a trailer hitch for a 2013 Subaru cross trek?

asked by: Nick A

0

Expert Reply:

We do indeed offer hitch fit options for the 2013 Subaru Crosstrek.

If your Crosstrek is equipped with the knock-out panel in the rear bumper panel, and you'd like a partially concealed hitch that mounts behind the bumper with only the receiver tube and safety chain loops being visible, I'd recommend the EcoHitch # 306-X7203. This hitch only works on Crosstrek models with the bumper knock-out panel.

If you'd like a standard, fully visible hitch, I'd recommend the etrailer brand Class III hitch, part # e98838. If a visible hitch doesn't bother you, this option is quite a bit less expensive. I've provided a side by side photo showing what each hitch looks like once its installed.

If you'll be towing with the hitch, you'll need a few other items to complete your towing setup. For a trailer wiring harness, use # 118467. If you go with the etrailer brand hitch, use the # D-28 ball mount along with the # PC3 hitch pin. If you go with the EcoHitch model, use # 2753 which includes the hitch pin. For a 1-7/8 inch trailer ball, use # 19260 or # 63845 for a 2 inch ball.

I've linked to some installation videos that you might find helpful.

expert reply by: Mike L

0

Installed Appearane of EcoHitch 306-X7203 and etrailer Brand e98838 Trailer Hitch for 2013 Subaru Crosstrek
(click to enlarge)

Answer 1

The etrailer.com #e98838 will definitely fit your 2014 Subaru XV Crosstrek Hybrid. Though we have not done an install on a 2014 as of yet, I did include an install video we did on a 2015 for you to check out.

view full answer...

Answer 2

In order to get a ball mount that has effectively 0 inches of rise or drop you would need to get a Trailer Hitch Ball Mount, part #D-4, like the one you referenced that has a 2 inch drop, and then use a 2 Inch High Rise Ball, part #C40034. I attached…

view full answer...

Answer 3

If your 2013 Chevy Equinox came with the factory trailer hitch and there is trailer wiring present you have the tow package and the correct trailer wiring harness you'd need is the #118264. Otherwise if you do not have the tow package you'll…

view full answer...

Answer 4

I do have a few items you can look for that will give you an idea as to whether or not your 2018 Chevrolet Equinox came equipped with the factory tow package (K5L) or not but the only sure fire way to tell would be to obtain your VIN and contact the…

view full answer...

Answer 5

For the Dexter 10K axles a 5/8" wheel nut #95188.

view full answer...

Answer 6

Yes, in order to set your trailer up for use with shore power you will first need an AC distribution panel. For this, I recommend a Progressive Dynamics Series AC Distribution Panel. In order to bring power into the panel you will also need a power…

view full answer...

Answer 7

There are large RVs, over 40 foot Winnebagos as an example, that only use up to a 4K generator. It seems like a generator is what you need for the power the items you want to have in the trailer. We currently do not have generators or inverters that…

view full answer...

Answer 8

I attached a picture that has the bolt hole dimensions of the Demco Hydraulic Brake Actuator #DM8759411 for you to check out but the distance between the two closer holes is 3 inches and the distance between the two holes further apart is 9-1/2…

view full answer...

Answer 9

You can see all fixed 2-inch ball mounts by clicking on the linked page. The shortest of these is the Curt Ball Mount #C74WR. This aluminum ball mount measures 8-1/2-inches from the center of the hitch pin hole to the center of the ball hole. It…

view full answer...

Answer 10

Having a ball mount that is longer should not be an issue. It actually can provide more clearance when turning. The standard for a 2 inch ball mount is around 8 to 8-1/2 inches from the center of the hitch pin hole to the center of the ball hole. We…

view full answer...

Answer 11

You will want to choose a ball mount that will place the trailer ball at the appropriate level so that your trailer is towed level, or within 1-1/2 inches plus or minus either way. The ball mount you reference, #D-4, has a rise of 3/4 inch so it…

view full answer...