bing tracking image
  1. Trailer Leaf Springs
  2. etrailer
  3. Double Eye Springs
  4. 24-7/8 Inch Long
  5. 1-3/4 Inch Wide
  6. 7000 lbs
6-Leaf Double-Eye Spring for 7,000-lb Trailer Axles - 24-7/8" Long

6-Leaf Double-Eye Spring for 7,000-lb Trailer Axles - 24-7/8" Long

Item # e64SR
Our Price: $69.99
Trailer Leaf Springs
Shipping Weight: 18 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Need help with installation?
Locate installers near me
Double-eye leaf spring acts as part of a trailer's suspension system by providing an attachment point for a 7,000-lb axle. Spring flexes to resist shock and also ensures a smooth ride. Includes bushings with 9/16" inner diameter. Great Prices for the best trailer leaf springs from etrailer. 6-Leaf Double-Eye Spring for 7,000-lb Trailer Axles - 24-7/8" Long part number e64SR can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (90)
  • Q & A (0)
  • Photos

etrailer Trailer Leaf Springs - e64SR

  • Double Eye Springs
  • 24-7/8 Inch Long
  • 1-3/4 Inch Wide
  • 7000 lbs
  • 6 Leaf
  • Painted
  • etrailer

Double-eye leaf spring acts as part of a trailer's suspension system by providing an attachment point for a 7,000-lb axle. Spring flexes to resist shock and also ensures a smooth ride. Includes bushings with 9/16" inner diameter.


Features:

  • Leaf spring acts as part of your trailer's suspension system
    • Provides attachment point for your trailer's axle
  • Multiple leaves allow flexibility to absorb road shock
    • Allows for a smooth ride
    • Reduces wear and tear on trailer
    • Ensures level ride on bumpy and uneven surfaces
  • Sturdy steel construction
  • Nylon bushings included
  • Pre-mounted hangers or aftermarket hanger kit (sold separately) required for installation
    • Spring attaches to hanger mounted on trailer frame at one end
    • Other end connects to shackle straps suspended from hanger or equalizer


Specs:

  • Quantity: 1 leaf spring
  • Spring capacity: 3,500 lbs
  • Axle capacity: 7,000 lbs
  • Length from center of spring eye to center of spring eye (unloaded): 24-7/8"
  • Spring width: 1-3/4"
  • Eye diameter with bushing: 9/16"
    • Eye diameter without bushing: 11/16"
  • Leaf thickness: 3/8"
  • Number of leaves: 6
  • Additional dimensions: see table


Double-Eye Spring Diagram

Part NumberABCD
e64SR12-7/16"13-3/16"24-7/8"3-1/2"


Note: To ensure proper axle alignment and suspension performance, leaf springs should always be replaced in pairs.


Leaf springs are an integral part of your trailer suspension system. The leaf springs provide the attachment points for your trailer's axle, suspending it from the frame of your trailer. Each spring flexes to absorb road shock as you travel, allowing the axle to move somewhat independently of the rest of your trailer. This helps to reduce wear and tear on the trailer and also ensures a smooth ride.


Double-eye leaf springs attach to hangers that are welded onto your trailer. One end of this spring will attach directly to the hanger with a suspension bolt. The other end will attach to shackle straps that are suspended from a hanger. These straps allow the spring to move and pivot so that it can better compensate for uneven pavement. If you have a tandem- or triple-axle trailer, the shackle straps will be attached to the equalizer that connects multiple springs.


To mount this spring, you will need hangers, shackle straps, and suspension bolts. If you are simply replacing a spring, you may still have hangers welded onto your trailer. You should, however, replace your shackle straps because they are usually the first component to wear out. You may choose to replace old suspension bolts as well. It is recommended that you replace the other leaf spring in your setup at the same time. Because springs can sag and elongate as they wear, this new spring may not exactly match the old one, and the alignment of your trailer could be affected.


If you are fabricating a trailer, you will need to purchase a hanger kit for installation. To determine the type of hanger kit that you need, you must know the specific type of leaf spring that you have, as well as your axle capacity. Depending on the hanger kits used with them, springs can be configured to work for single-, tandem- or triple-axle applications. Hangers and other suspension components can also be purchased separately if there isn't a complete kit that works for your setup.



e64SR etrailer Double Eye Trailer Leaf Spring - 6 Leaf - 3,500-lb Capacity

Compares to SP-198275




California residents: click here


Customer Satisfaction Score:


Customer Reviews

6-Leaf Double-Eye Spring for 7,000-lb Trailer Axles - 24-7/8" Long - e64SR

Average Customer Rating:  4.6 out of 5 stars   (90 Customer Reviews)

Double-eye leaf spring acts as part of a trailer's suspension system by providing an attachment point for a 7,000-lb axle. Spring flexes to resist shock and also ensures a smooth ride. Includes bushings with 9/16" inner diameter.

by:

The parts ordered came without issue and were exactly what I needed to repair my suspension issues. The assistance I received from Sarah was outstanding.



by:

The product themselves are quality however, the customer service and shipping is what was dissapointing. I originally ordered 4 items. I was told only one item was on backorder. Not a big deal. I checked a week later on the backorder and was told that they did not know when an item would come from the namufactuere. However, it was a different item from the first. So two items were not available and turned out to not be available. It was a lack of communication and I had to figure this out by calling after waiting a week and several misguided emails. Next was the packaging. It was all broken up and taped when I got it. Whoever packaged these items threw 4 heavy leaf springs and 2 sets of U-bolts into a box without securing them. They arrived but the two U-bolt packedges were previouly opened and sealed with masking tape and i'm missing all the nuts and lock washers from one package. The box could have come open during shipment but they were not secured inside the box at all, which led to the catstrophy inside the box. Due to all this, I will probably not order again from this site.



by:

Couldn’t ship for 3 weeks and placed all together with other items completely destroyed during shipping with powder coat chipped off of other parts

Etrailer Expert

Brooke M.

3/19/2024

Gosh that is frustrating, I am so sorry! I will make sure our customer service team reaches out to you about this.



by:

I received my order on the time that was promised. A few days later I opened the packages and everything I ordered was there. One of the boxes looked bad but everything stayed and didn't fall out. I haven't installed them yet put soon will. I thank Kimberly for helping me get all of the correct parts that was needed to do the job.



by:

Great customer service, parts order came quickly. In stock. Thank you e-trailer !



by:

The springs arrived very quickly and were just as described. I would highly reccomend these springs and etrailer.



by:

This leaf spring was a exact replacement for the springs on my 2021 Grand Design Solitude 5th wheel. This was a replacement for one of a set of 4 I purchased. Check the eyes because they may have a flaw and may not be round. My thanks to TammyP who went out of her way to get the exchange together she was so helpful!



by:

My springs arrived yesterday, as promised. Packaging was great and the parts look perfect. I ordered a set with one more leaf and believe i will be extremely happy. Big shout out to Phillip for all the help.



by:

I purchased this spring so we could have a backup in case of failure while on our road trip. The spring looks great, has no topical rust and arrived fast and very well packaged. After seeing it, I am planning on next season buying the other three to replace them all.



by:

Seem to be a direct replacement for my Bighorn 5th wheel, haven't been on the road yet. Paula was excellent in assisting me with the right (4) springs, u bolts, equalizer and wet bolt / shackle kit. Her personal assistance saved me time and frustration, much better than using just the item descriptions.



by:

Great spring kit



by:

The new spring fit perfectively.



by:

Perfect fit for my Solitude 310GK. Fast delivery allowed me to get this taken care of before we had to move to next location.



by:

The dimensions are as described. The band keeping the spring pack in line is robust and appears to be riveted in place. I replaced the installed nylon bushing with bronze and the fit was a good match.



by:

Very durable after one year of heavy use. Installed on a single axle trailer that is always loaded with 700 gallons of water and driven on rough terrain, no sign of sag or fatigue.



by:

The leaf spring is a quality item, it arrived 2 days after I ordered with very nice packaging. I ordered this to have a spare spring in case one breaks.



by:

items worked great!



by:

Springs fit perfectly on my 2014 Raptor



by:

Great service, quick delivery



by:

Nice Springs, fast shipping.



by:

All parts were as listed and fit perfectly. Installation went without any problems. Also help with ordering insured I purchased the correct part.



by:

Arrived promptly great packaging



by:

Stacey A provided excellent service and communication. Product arrived as scheduled. Always great prices and great service from etrailer!



by:

Product was exact replacement. Worked great.



by:

Very pleased with product. Etrailer has always been good to work with. Fast delivery.


25
90
Show More Reviews

See what our Experts say about this etrailer Trailer Leaf Springs

  • How to Pick Out Leaf Springs for 2003 Colorado 27RL Trailer
    Axle spacing doesn't always guarantee an exact spring length since the equalizers could be different lengths too which would throw this off. What we need to do is first determine the axle capacity of your trailer. You can pretty easily check this by looking at the VIN plate on the trailer and the axle capacity will be listed there and then measuring the length of your springs when the axle doesn't have any weight on it from spring eye to spring eye. With those two pieces of info I can...
    view full answer...
  • Parts Needed To Convert Tandem Axle Trailer To Triple Axle
    I would be happy to help! To add a 3rd axle you will need to start with a new hanger kit of which I recommend the Triple-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front/Rear/Center # APTT5. This will work perfectly with the Lippert 7k axles you have. Next you will need 6 of the 6-Leaf Double-Eye Spring for 7,000-lb Trailer Axles - 24-7/8" Long # e64SR which when paired with the # APTT5 will give you 34" axle spacing. Moving on to U-Bolts you will need 3 of the U-Bolt Kit...
    view full answer...
  • How to Determine if Leaf Springs Will Work on 7,000 lb Trailer Axle
    We may have an option for you but don't have any way to know the current suspension or leaf springs you have on your current trailer axles. The two leaf springs we carry for a 7,000 lb axle are: - Double-Eye Suspension: 6-Leaf Double-Eye Spring for 7,000-lb Trailer Axles - 24-7/8" Long # e64SR - Slipper Spring Suspension: 5-Leaf Slipper Spring w/ Hook End for 7,000-lb Trailer Axles - 26-5/8" Long # e74SR In order to determine if these will fit you will need to measure the length from...
    view full answer...
  • Lift Kit for Tandem Axle Fifth Wheel Trailer When Towing with New Truck that Sits Up Taller
    The tandem axle lift kit part # RR23QX that you referenced would be the easiest and best solution to gain 2 inches of height on your trailer suspension. Going with a new 7k leaf spring might help little bit like with the part # e64SR but this is a 6 leaf spring like you have already and is shorter at 24-7/8 inches so you'd most likely have to move hangers around and wouldn't gain a significant amount of height if anything at all.
    view full answer...
    Image 1 for
  • Can I Go From A 4 leaf To A 6 Leaf Double Eye Leaf Spring
    Yes you certainly can go from a 4 leaf to a 6 leaf spring on your 2020 Open Range 5th Wheel. It will add slightly to your ride height, but there should not be any other components that will be compromised or need to be swapped out. You will want to be sure that your axle u-bolts will be long enough to accommodate a slightly thicker spring. If you have an extra 3/4" or 1" of thread left you should be good. You will also want to be sure that the new spring has the same eye-to-eye length as...
    view full answer...
  • Leaf Spring Upgrade and Over Under Conversion Kit For Montana Trailer
    When replacing the leaf springs you do want to take into consideration that the leaf springs sag and flatten over time. The best way to measure them is when the suspension is not loaded. To measure for the correct leaf spring length, you should jack up the trailer so that the axle hangs free, then measure straight across from the center of one eye to the center of the other eye. See what your measurement is then to choose the correct length of spring. It is okay to use a higher rated...
    view full answer...
  • 6k Leaf Spring for a Forest River Toy Hauler
    Are you sure you aren't exceeding the capacity of your trailer? Going with higher rated springs will give you additional spring capacity but will not increase the overall capacity of your trailer. The only way going with new leaf springs like part # e64SR will fix the sag is if your current 6k springs are worn out. These measure 24-7/8 inches. You would need to unweight your current axle and measure the length. If your current springs are around 25-1/4 inches long these would work well.
    view full answer...
  • Can Trailer Have Tandem Axles Installed Where Axles are at Front and Back of Trailer
    If you build the trailer like you sent in a picture of the front wheels are going to scrub (drag) really hard as you make any turn so most likely you'll have issues if the trailer has a lot of weight on it. This would not be how I would recommend you install the axles. If you can move the center point of the axles to be right at 60 percent of total distance from the ball coupler and have the two closer together you'll have a much better setup.
    view full answer...
    Image 1 for Image 2 for
  • Replacement 7,000 lb Leaf Spring for 2021 Keystone Carbon 358
    The only 7,000 lb double-eye leaf spring we have is the # e64SR you looked at. This may work for you depending on how you measured. This leaf spring measure 24-7/8" from center of spring eye to center of spring eye. However, I'm not sure if your leaf springs have flattened out and whether or not you accounted for it when you got 26". To see if this would truly be a fit I recommend using the flat length measurement. This is the distance from the center pin to the center of the spring eye...
    view full answer...
  • Hanger Kit to Use with 7k Trailer Axle Leaf Springs
    For 7k trailer axle springs like the # e64SR that you referenced the part # APT8 would work great. This comes with standard height hangers that are 2-1/2 inches tall for front and rear and for the center is 4-1/2 inches.
    view full answer...
  • Distance Between the Hangers of Kit # APT5 When Used with e64SR Spring
    For the hanger kit # APT5 with the leaf spring # e64SR you will want a distance of 29-1/2 inches between the hangers.
    view full answer...
  • Replacement Dexter E-Z Flex Equalizers for 7K Axle on 5th Wheel
    You would indeed need to replace the E-Z Flex equalizer, as Dexter Axle doesn't offer replacement rubber cushions. You are correct regarding the difference between the # K71-655-00 and the # K71-653-00, The # K71-655-00 includes the E-Z flex equalizers and the necessary hardware for mounting the equalizer to the center hanger. The # K71-653-00 is the entire kit that includes the equalizers, the shackle links and all the necessary mounting hardware. As far as replacement leaf springs go,...
    view full answer...
  • Troubleshooting Jerking Motions With A 2000 Take 3 Car Hauler Trailer
    With your Take 3 trailer being over twenty years old the suspension could definitely use a tune up if you haven't already so new leaf springs are a good starting point. You'll want to ensure that you choose your leaf springs based on the capacity of the axle, style (double-eye or slipper spring) and the length. For example, if you had a 7k axle with double-eye leaf springs and the measurement from eyelet to eyelet was 24-7/8" then you would want the # e64SR. The next step would be upgrading...
    view full answer...
  • How to Determine Correct Replacement Leaf Spring for 2004 Forest River Toy Hauler Trailer
    Trailer leaf springs will measure differently when under load so its tough to get an accurate eye-to-eye dimension without removing the spring. Also, after years of use a leaf spring can stretch and actually lengthen by as much as 1/2 to 3/4-inch. Since you are seeing some sag and the trailer is a decade old that is likely to be the case unless there is another suspension component that is damaged. I checked the Forest River website for any information on your toy hauler's suspension parts...
    view full answer...
  • Hanger Spacing for Triple Axle Trailer with 24-7/8 Inch Long Double-Eye Springs
    When using a triple-axle hanger kit like # APTT3 with the 6-Leaf 24-7/8 inch long Double-Eye Springs # e64SR referenced in your question, you will want to have a distance of 29-1/2 inches from the center of the hole in the front hanger to the center of the hole in the center front hanger. From the center of the hole in the center front hanger to the center of the hole in the center rear hanger you are looking at a distance of 34 inches. Then from the center of the hole in the center rear...
    view full answer...
    Image 1 for
  • Can a Heavier Leaf Spring Be Used on a Tandem Axle Trailer with Lippert Axles
    Generally speaking, the leaf springs will need to match the weight capacity of the axle. You can go with a heavier leaf spring like you mentioned but please keep in mind that this will not increase your gross vehicle weight rating (GVWR) and it will make the ride stiffer. In order to select the correct replacement leaf springs for your trailer you will need to measure the leaf spring you have now from the center of each eye while there is no tension on it if they are double eye or from...
    view full answer...
  • Recommended 7000lb Leaf Springs To Replace Dexter 072-027-00
    I do have an option for you, but we do not carry the Dexter 072-027-00 you mentioned. However we do have the etrailer Double-Eye Spring for 7,000-lb Trailer Axles - 24-7/8" Long # e64SR which will be 3/8" shorter but that is still close enough for it to be used without messing up the suspension geometry. I included a video of the # SP-198275 for you to take a look at.
    view full answer...
  • Warranty Length and Improvements that Lippert Center Point System Offers to Trailer Installed On
    The Lippert Components Center Point by Trailair Air-Ride Suspension Upgrade # LC1565391 that you bought has a 90 day warranty. This system has only one inflation point which equalizes the pressure between both sides of the trailer so it does not have a way to have more pressure in one side than the other. This system is designed to greatly improve the suspension performance and ride quality of the trailer you install it on but does not necessarily provide additional support although it...
    view full answer...
  • How To Choose Correct Replacement Leaf Springs for a Keystone Montana 5th Wheel
    In order to find the correct replacement leaf spring for a trailer you first need to start by noting the type whether that be slipper or double eye. Then, you'll need to measure their unloaded length via jacking up the trailer. If the springs are worn they will measure longer than their replacement. Lastly, you will need to note the axle capacity which is found on the tag in the center of the beam. Please note, the number of leaves does not really denote capacity as leaves have different...
    view full answer...
  • Can I Use Heavier Rated Leaf Springs on Trailer Without Causing Damage
    You can use leaf springs that are rated higher than the axle without any issues as long as they measure the correct measurement for your trailer. For example the 6-leaf double eye spring for 7,000 lb axles part # e64SR measures 24-7/8" eye to eye. The only thing you may notice is that the ride may be a bit stiffer with the heavier rated springs. Please keep in mind upgrading to a 8,000 lb spring may require you to switch over to slipper springs instead of double eye springs. Which is...
    view full answer...
  • Replacement Leaf Spring with Higher Weight Capacity or Suspension Enhancement for Trailer
    I would go with a heavier rated leaf spring like the 7k par # e64SR that you referenced. Suspension enhancement on trailers can work well but going with heavier rated springs will give you a better ride quality as well as support.
    view full answer...
  • How to Measure For Correct Double Eye Leaf Spring on 7,000 lb Axle
    To determine the correct length of leaf spring on a 7,000 lb axle, all you have to do is measure from the center of one spring eye to the center of the other spring eye. Keep in mind your current springs will have elongated a bit over time so you can go with slightly shorter ones if the exact distance isn't available. We have one double-eye spring for a 7k axle, and it measures 24-7/8" from center to center of its spring eyes: - 6-Leaf Double-Eye Spring for 7,000-lb Trailer Axles - 24-7/8"...
    view full answer...
  • How Much Clearance is Needed Between Trailer Axle and Trailer Frame
    Since your axle is mounted on top of the leaf spring you will want between 2 and 2-1/2 inches between the top of the axle and the trailer frame. You will also want 3 inches of clearance between the top of the tire and the fender. Check out the FAQ article on trailer suspension I attached also.
    view full answer...
  • Replacement Leaf Spring Recommendation for a Dexter Axle 072-098-00 Rated for 7,000 lb Axle
    The leaf spring that best matches your description is the following from Universal Group: - 6-Leaf Double-Eye Spring for 7,000-lb Trailer Axles - 24-7/8" Long # e64SR We measure our leaf springs when they are relaxed but Dexter will measure theirs when they are under a load, which is why you see the length difference. Be sure to replace the leaf spring on both sides of any given axle for best performance, tracking, and trailer ride quality.
    view full answer...


< Previous
123. . .7



Do you have a question about this Trailer Leaf Spring?


Info for this part was:

Employee Lindsey S
Edited by:
Lindsey S
Employee Jameson C
Expert Research:
Jameson C
Employee Joshua S
Video Edited:
Joshua S
Employee Chris R
Video by:
Chris R
Employee Wilson B
Updated by:
Wilson B
Employee Manda E
Updated by:
Manda E
Employee Mike S
Written by:
Mike S
Employee Andy C
Installed by:
Andy C
Employee Kevin C
Installed by:
Kevin C

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.