Summer Starts Here - Save up to 70%
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Want brake adjustments that go like clockwork? These brakes automatically adjust as you tow so you don't have to crawl around on the ground to do it manually. 12" x 2" Assemblies fit 14-1/2" to 16" wheels. Made in the USA.
Features:
Specs:
Quick Tip: There's really not a whole lot to getting new drum brakes. If you've confirmed that all of the specs listed above line up with what you need for your trailer, you can be pretty sure these will work for you.
With standard electric brake assemblies, you need to manually adjust them every now and then to make sure you're getting the shortest stopping distance every time you tow.
With self-adjusting brakes, though, you'll always have peak stopping power - simple as that! As the brake pads wear over time, a tensioning cable will automatically keep the pads in alignment so they'll consistently make contact with your drum when you brake. You won't have to do tedious manual adjustments anymore.
Dexter invests a lot of resources to ensure that these brakes meet the requirements for certification set by the Canadian Standards Association (CSA). Basically, a CSA certification tells you that these trailer brakes are well-built and safe for use on the road.
Once you get these brakes installed, you'll need to break them in. First, find a long stretch of road or a big, empty parking lot. Once you're there, set your brake controller to its maximum setting and get moving. Speed up to about 40 mph and brake to slow to about 20 mph. Repeat this 15-30 times. The goal is to get the brake shoes and magnet properly seated into your drum. You'll know you've done that when it feels less jerky (and more consistent) each time you apply the brakes.
Note: The brakes will be very hot after doing this, so after every 10 stops you'll want to wait about 10 minutes to let the brakes cool off before continuing. If you don't, you might cook and crack the pad material.
Average Customer Rating: 4.8 out of 5 stars (2431 Customer Reviews)
Want brake adjustments that go like clockwork? These brakes automatically adjust as you tow so you don't have to crawl around on the ground to do it manually. 12" x 2" Assemblies fit 14-1/2" to 16" wheels. Made in the USA.Quality is top notch. Instructions were clear and installation went without a hitch. Delivery was actually a day early which was great.
Etrailer really came through good price fast shipping and helpful videos the brakes along with their spring kit breathed new life in this old trailer
William M.
8/2/2023
the brakes and springs have worked flawlessly
Easy application the only thing I wish they came with wire connectors
Michael
5/13/2024
Great no issues putting it on trailer
I have been running these brake assemblies in my 14' dump trailer for a year now. I've logged somewhere close to 5K miles on the trailer carrying loads that sometimes had me thinking I'm glad to have G-rated tires on there!. I have not had to adjust them manually in any way and they have performed flawlessly. I won't even think about putting anything else on my trailers.
Good product. Had to reset a couple assemblies that may have come apart during shipping. The big box of loose heavy parts doesn’t work well. All else is great.
Also, I paid for early 3 day shipping and they arrived in 7 days. Will ask for refund of extra shipping costs.
Jenny N.
4/10/2024
Hey there Luke, thank you for reaching out. I will have our Customer Service team reach out to you about the shipping cost.
Came right when they said it would and the install was supper easy. Hardest part was getting the old parts off. No issues whatsoever, I highly recommend using the Dexter Self-adjusting brakes. See the before and after photos. Etrailer is the place to buy your products.
I thought the price was high, but it makes repair and easy in and out installation.
They arrived when promised. What I really like best about the backplates is they are made in the good old USA and they installed perfectly. Thank you Dexter and eTrailer. Terri N. was very helpful as well!
Parts arrived well packaged and sooner than expected. Easy install and quality parts. Break in was a little tough to get done by manufacture steps but completed and the new brakes seem fine. Little pricy but seem ok right now.
All parts arrived timely as always. All parts fit, the install videos are very good. All the things that makes etrailer the best to get parts for my rv. The install is easy, the most difficult activity was removing the old parts.
Everything fit properly and installation went smoothly. All needed parts were included, which was nice. The self-adjust worked well and break-in was quick.
I've only put about 1500 miles on the trailer since install, so I can't speak to longevity.
I'd buy them again though.
Just received and unboxed today, product looks excellent just as I would expect from Dexter. Should be a easy install.
Jay
1/13/2024
Great, stopping power is fantastic!
same as original easy to install would order again
Customer service was great to work with. Parts arrived timely, undamaged, fit, and have been working great so far. Very happy.
It didn't help give me any more braking than I had. Eventually I had to upgrade to electric over hydraulic brakes which cost me $[XX].
Diana was very helpful when ordering these brakes. The prices are good and everything arrived at the promised time in good condition. The brakes are an exact replacement of the original and everything went together well. One of the easiest brake jobs I’ve ever done. I recommend etrailer and will buy from them again.
Richard
2/13/2019
After one year the brakes are working as expected. I really like the way they self adjust.
Fast shipping (2 days) and shipped in original packaging. Easy installation.
Work as advertised. No longer have to worry about the trailers braking power!
Order arrived on time, Quinn is very helpful and stays on top of the orders
Very easy to swap these new assemblies onto the trailer. Remove the five nuts, pull-off old assembly assembly and you're ready to install new brakes. Not having to pull the individual components off as is done on a car makes this a snap. Looking forward to see how well self-adjustment feature really works.
Best replacement brake assembly for dexter 7k axles! Never thought my mammoth trailer could stop so well.
Replaced all parts with equipment made in the USA. etrailer is fantastic. Their customer service is fantastic.
Great product. Very easy installation.
Exact fit and great price. This is by far the easiest way to replace trailer brakes. etrailer is always a pleasure to business with. Fast free shipping.
Do you have a question about this Trailer Brake?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Tommy
11/11/2023
Great! I have had no problems with them. I have been pleasantly surprised how well the self adjusters work.