Curt Easy Mount Bracket for 4- or 5-Way Flat Trailer Connector - 2" Hitch
(73 reviews)
Price: $15.57
In Stock
Curt Easy Mount Bracket for 4- or 5-Way Flat Trailer Connector - 2" Hitch
Item # C58001
Our Price: $15.57
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (73)
- Q & A (0)
- Photos
CURT Accessories and Parts - C58001
- Trailer Wiring
- Mounting Hardware
- Brackets
- 4 Flat
- 5 Flat
- CURT
Attach this electrical bracket to your 2" trailer hitch to make mounting your trailer connector (sold separately) fast and easy. Use with either a 4-way or 5-way flat connector. No drilling required.
Features:
- Electrical bracket lets you mount your trailer connector to your hitch quickly and easily
- Holds (1) 4-way or 5-way flat connector
- Fits 2" x 2" trailer hitch receivers
- Sturdy steel construction is long-lasting
- Black powder coat finish resists corrosion
- Notched design allows for access to pin and clip or hitch lock
- Fast, simple, no-drill installation
- Fit bracket over hitch receiver opening and secure around lip with included hardware
Specs:
- Overall dimensions: 6-1/8" wide x 3-1/4" tall x 1-1/8" deep
- Diameter of mounting hole: 1-3/4"
58001 Curt Easy Mount Electrical Bracket for 2" Trailer Hitches - 4-Flat or 5-Flat Plugs
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Product did not meet expectations
- Wrong item was ordered
- Did not arrive in time
Customer Reviews
Curt Easy Mount Bracket for 4- or 5-Way Flat Trailer Connector - 2" Hitch - C58001
Average Customer Rating: 4.8 out of 5 stars (73 Customer Reviews)
Attach this electrical bracket to your 2" trailer hitch to make mounting your trailer connector (sold separately) fast and easy. Use with either a 4-way or 5-way flat connector. No drilling required.by: Chris03/05/2024
Ahh I absolutely love this product! I actually reached out to etrailer asking about running the trailer wiring not out of the trunk and I was recommended this bracket. Super easy to install. The directions recommended bending the lower flange to make a tighter fit around the hitch. Blah. I did this initially and I didn’t like the way it fit because it kind of bowed out. I straightened it back out and added a spacer. The spacer is great in my opinion. Once tightened down they made for a perfect fit. Super easy to use. Great product. Love the more flush look of the pin. Way to go!
by: Brian 05/03/2024
Great for mounting flat electrical conn ectors.
by: Jim B.06/20/2019
The bracket fit the receiver hitch and keeps the electrical plug from dragging or coming loose. When I tightened the lower retainer, the flat 4-prong plug was loose. As I re-tightened the retainer mounting bolts, it (the end of the retainer) began to bend slightly. See attached pic. Using a heavier or stronger gage metal will prevent this bending. Overall, I still give it 5 stars as I have had no problems with the plug falling onto the ground. Properly tightened, it holds the plug. I would recommend this product to everyone who has had a wiring plug falling onto the ground and being dragged drag on the ground
by: Ron05/16/2021
Great product to complement new electrical wiring for my hitch. It holds the wire securely in place for when it’s needed.
by: Steve04/23/2018
Works great! Install was simple. Now the flat connector doesn't dangle :)
by: David 06/23/2023
Not much to say. Seems to be heavy gauge/well made, but I have not installed it yet as I am thinking I may just keep the wiring inside the cargo area for now. Perhaps I will use it if I do a long towing trip or tow more frequently. Seems nice.
by: Robert01/22/2023
My hitch and accessories arrived at my doorstep 40 hours after being ordered.
This is quite a miracle to travel probably almost half way across the country.
Everything was shipped immediately after ordering and arrived in perfect order.
Outstanding Service and at a reasonable price. Great work Noah!
by: Ed09/20/2018
Good product but not for the (75579) Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III on a Town & Country. Because the hitch fits tight against the bumper this does not fit. I was in a time crunch to travel, so I kept it and made it work by bending it and pushing the bumper up so I could slide it on the hitch.
by: bertman10/06/2017
Fits as stated and seems to be good quality. Installs in about 5 minutes
Even if the nuts loosen over time the part won't fall off unless the bolts completely fall out.
by: Richard W04/23/2018
I purchased the Curt trailer wiring harness about 2 yrs ago. I didn't like having it running out the back hatch. I use my trailer a lot. I purchased the Curt 58001 mounting brkt. I reviewed the wiring install video and saw the grommet that you normally use for the power line to the harness from the battery. Now I had the hole to run the trailer connector wiring thru with out make another hole and having to splice the connector wiring.
I cut a slot in the middle of the grommet for the wire and then continued to cut the grommet so I could slip the wire to the center of the grommet, put on some liquid electrical tape and ran the wire to the bracket. As waterproof as original. Mounting bracket made a nice, practical connection point. I greatly appreciate your videos and etrailer is my go to source.
by: Rob 07/04/2020
Easy install, very tidy. Only time will tell how well this survives New England winters, but nice simple solution for exterior wiring.
Trivial omissions from manufacturer's writeup (both became obvious ten seconds into installation):
1. This bracket can only be installed at the very end of the receiver tube, not at some arbitrary point along the receiver tube.
2. The spacers are for the receiver tube, not the wiring.
A rubber receiver tube cover will hold the bracket in place while one attaches the mounting hardware.
by: Eric F12/15/2016
The mount bracket is a great way to finish the hitch project; includes a hard mounting point for the light assembly from the vehicle. The hard mounting point makes attaching/detaching the male/female ends of the light cables a snap. The bracket has been on my vehicle for a year without any issues.
by: Morgan A.09/09/2018
Perfect solution for conveniently & safely mounting trailer wiring for a 2" hitch receiver! Very quick & easy to mount, solid, and helps keep wiring above safety chains. I looked at several other mounts that are clamped to the receiver, but this is much easier.
by: Gary 05/30/2023
Easy to install. Told the local Uhaul dealer they should carry them!
by: Matthew10/07/2018
I already recommended this to all of my family. It's great having your wiring harness fixed in one place. It makes plugging in easy, but it will also save your wiring from the stress of the road. I didn't want any rattling on the road so I cut some vinyl tube to fit over one of the carriage bolts. I could vinyl both bolts on one receiver and only one carriage bolt on the other, so use as you see fit.
by: Jonathan11/28/2020
I've been blown away by every Curt product I've bought. This one didn't disappoint. The metal is heavy and strong, the powder coat is thick and indestructible, the fasteners are stainless and exactly right, and the product itself is a great solution to the problem of mounting the trailer electrical connector.
by: Donald10/05/2019
I just installed the hitch and wiring harness today(Saturday). I thought I followed the video to the T but my car lights didn’t work. I called and they told me it would be Monday. I was disappointed but understood. Three hours later I get a call and they walked me thru my mistake. What great customer service this was my third purchase and if I need more they will get my business!
by: Patrick03/20/2018
Fits great on Curt hitch w/ 2" receiver and makes installation look like it was done by a professional!
by: Raymond04/12/2018
Easy to install, and the nice black paint is a great improvement, as it covers the 2" receiver (which no longer looked new). We're glad to have the wiring secured, and not dangling behind the car (a black Lexus RX-350).
by: Christopher07/19/2018
When trying to put on the hitch. The hitch weld part is to wide for the bracket. And also it will not work on a traverse. Will be covered up by the plastic
by: David 10/30/2021
Nice no loose wires moving all the time
David
10/31/2022
Still works and looks good
by: Mark03/06/2018
Simple installation. Product fit with very little issue. Would recommend to anyone who has loose trailer wire and plug hanging from vehicle.
by: Bryant09/01/2019
Cleanly finished off the installation of a new hitch and provides a solid mount for the electrical connection. Works perfectly!
by: Larry07/10/2019
Very simple and straightforward solution to my need to secure wiring harness on my SUV. Easy to install.
25
73
Show More Reviews
See what our Experts say about this CURT Accessories and Parts
- Comparing Class III Trailer Hitch Receivers For a 2023 Subaru CrosstrekThe main differences between our class III receivers for your 2023 Subaru Crosstrek is the amount the receiver is visible. The Draw-Tite Max-Frame Trailer Hitch Receiver # 76209 is the most visible when it is installed. The cross tube along with the 2" receiver are both visible with this receiver. These can also affect your departure angle on steep driveways and on tall curbs. The cross tube does have a mounting flange to accept either a 4-Way Bracket # 18144 or 7-way Bracket # PK12711U....
view full answer... - 4-Way and 7-Way Trailer Wiring Harness For a 2023 Mazda CX-50 With Curt Trailer Hitch ReceiverCurrently the Vehicle Wiring Harness # C45FV is the only custom fit wiring harness available for your 2023 Mazda CX-50. This harness is for a 4-way flat connector that will fit most of the smaller trailers you may tow. This will likely be the most useful wiring as I see your CX-50 has a maximum towing capacity of 2,000lbs to 3,500lbs depending on your exact factory options. You can always check with your dealer to determine your exact towing capacity. A Mounting Bracket # C58001 will allow...
view full answer... - Trailer Hitch Receiver and 4-Way Wiring Harness Compatible With 2022 Hyundai Tucson PHEVYes the Curt Trailer Hitch Receiver # C94WR will fit your 2022 Hyundai Tucson PHEV Limited. It has been confirmed by Curt to fit all trims of the 2022 Tucson and we also have reviews on our site from installations on the PHEV. I do recommend installing the Curt T-Connector Vehicle Wiring Harness # CU94FR when you install the receiver. This will give you a 4-way flat connector that will fit most small trailers as well as Auxiliary Lights # C53201. The auxiliary lights are needed if you...
view full answer... - Recommended Trailer Hitch Receiver For a 2022 Toyota Highlander Hybrid PlatinumWe do have the etrailer Trailer Hitch Receiver # e75ZR that has been confirmed to fit on your 2022 Toyota Highlander Hybrid Platinum. This receiver is a class III receiver size with a 500lb tongue weight rating and trailer rating of 5,000lbs. Be sure to not exceed any specifications from Toyota on your specific Highlander. I have linked an installation video below for the 2022 model year Highlander XLE Hybrid. I do feel our receiver is the better looking of the 2 as it is powder coated...
view full answer... - Comparing Curt Trailer Hitch Receivers # C99FR and C45CR For a 2022 Toyota HighlanderThe main difference that you will see is the Curt Trailer Hitch Receiver # C45CR has a visible cross tube where the Curt Trailer Hitch Receiver # C99FR has a hidden cross tube. So when you have these mounted on your 2022 Toyota Highlander Limited you will either see just the receiver slot and chain loops that hangs down, or you will see the receiver and cross tube that attach to the mounting plates on the left and right frame rails. I have included images so that you can see the difference...
view full answer...
- Difficulty Of Installation For etrailer Receiver Versus Draw-Tite On a 2021 Toyota Highlander HybridThe etrailer Trailer Hitch Receiver # e75ZR is rated 5 out of 10 for installation difficulty, which is the same as the EcoHitch # EH35VR. They both offer hidden crosstubes for a clean look. I actually prefer the etrailer hitch # e75ZR over the EcoHitch because I like that the receiver tube is matte black so that the part that does show, blends in better than the glossy finish of the other hitches. The etrailer hitch has a 500lbs tongue weight and 5,000lb trailer weight ratings, while...
view full answer... - Curt Trailer Hitch Receiver For a 2023 Hyundai PalisadeWe do have the Curt Trailer Hitch Receiver # C13427 which is confirmed to fit your 2023 Hyundai Palisade. For the wiring you will need the Upgraded Heavy Duty ModuLite Circuit Protected Vehicle Wiring Harness # C59496. Hyundai removed the factory style connector used on previous years from models which do not have the factory tow package. This ModuLite will allow you to tie into the tail light wiring to add a 4-way flat connector. The Curt Mounting Bracket # C58001 will allow you to secure...
view full answer... - Vehicle Wiring Harness Needed When Installing Trailer Hitch Receiver On a 2022 Honda PilotWith the etrailer Trailer Hitch Receiver # e98840 going onto your 2022 Honda Pilot you will need to decide what kind of towing you may be doing. The Tekonsha T-One Vehicle Wiring Harness # 118760 will give you a 4-way flat connector. This is most commonly used with smaller trailers that do not have brakes or separate batteries that require a vehicle charge. It can also be used with Auxiliary Lights # C53201 on cargo carriers or bike racks that impair the view of the tail lights on your...
view full answer... - Installation of Trailer Wiring Harness on 2018 Lexus RX 350LFor your 2018 Lexus RX350L the wiring harness # 118255 is not a fit. You will use the harness # 118252 if you have the factory tow package. This harness will be near the hitch on the driver's side of the vehicle and this harness has a protective cap so it won't be as obvious a match until the cap is removed. If you don't easily find the wiring harness then it is likely you don't have the factory tow package. If you don't have the factory wiring, then I recommend the 4-Pole Trailer...
view full answer...
- Recommended Trailer Hitch Receiver and Wiring Harness For a 2022 Honda PilotI recommend the etrailer Trailer Hitch Receiver # e98840 as the best receiver for your 2022 Honda Pilot. This receiver is the only one that has the matte black powder coat that will blend in with the black accent panels on your Pilot. The receiver is rated for up to 900lbs of tongue weight and towing capacity of 6,000lbs. Towing capacity increases to 8,000lbs when using a weight distribution hitch. Be sure to not exceed any limits given from Honda on your specific model Pilot. Depending...
view full answer... - Does The Exhaust Have to Be Lowered When Installing Curt Trailer Hitch Receiver On 2022 Toyota RAV4?The Curt Trailer Hitch Receiver # C13416 can be installed on your 2022 Toyota RAV4 Hybrid XLE without having to lower the exhaust. It will be easier to lift it into place with a 2nd set of hands to get around one of the exhaust tips and then the second. I recommend using a Nylon Brush # 814092 to clean out the threads on the frame nuts to prevent the chances of damaging the hardware during installation. I recommend installing the Curt Vehicle Wiring Harness # C56434 when you install the...
view full answer... - Recommended Trailer Hitch Receiver and Wiring for a 2023 Genesis GV80I recommend the etrailer Trailer Hitch Receiver # e65KR for your 2023 Genesis GV80. This receiver has a hidden cross tube and the matte powder coat finish gives you a clean factory appearance. The receiver has a 2" opening for an increased selection of hitch mounted accessories and ball mounts. Wiring harness # 119250KIT will provide you with a 4-way flat connector. This 4-way will allow you to connect to most small trailers you might tow. It can also be used with Auxiliary Lights # C53201...
view full answer... - Best Trailer Hitch Receiver and Wiring Harness For a 2022 Subaru CrosstrekI recommend the etrailer Trailer Hitch Receiver # e98912 as being the best for your 2022 Subaru Crosstrek. It has a matte black powder coat finish that I find better matches the trim and undercoating on your Subaru. It is not shinny and glossy which sticks out when on the bottom of the vehicle. It is a 2" class 3 receiver that offers a wider range of accessories and ball mounts than a 1-1/4" receiver. The maximum towing capacity of the receiver is 3,500lbs with 525lbs of maximum tongue...
view full answer... - Will The etrailer Trailer Hitch Receiver Fit a 2023 Nissan Rogue?Yes, the etrailer Trailer Hitch Receiver # e93ZR is confirmed to fit the 2023 Nissan Rogue. This information came from the manufacturer Curt and has been confirmed by our neighbors who have already installed this receiver on their 2023 Rogue. I do recommend installing the 4-Way # C44ER when you install the receiver. This will allow you to connect to the trailer lights on most small trailers and add Auxiliary Lights # C53201 to any hitch mounted accessories which impair the view of your...
view full answer... - Recommended Trailer Hitch Receiver and 4-Way Wiring For a 2023 Ford Mustang Mach-EYes, I recommend installing the Curt Trailer Hitch Receiver # C77ER on your 2023 Ford Mustang Mach-E. This has a hidden cross tube for a clean, factory appearance. The Wiring Harness # C59496 will give you a 4-way flat connector. This is the common connector found on most small trailers. It will also allow for Auxiliary Lights # C53201 if you are carrying a hitch mounted accessory which impairs the view of your tail lights. The Mounting Bracket # C58001 will allow you to secure the end...
view full answer... - Recommended 2" Trailer Hitch Receiver With The Most Ground Clearance For 2018 Mazda CX-5Out of all of the 2" trailer hitch receivers offered for your 2018 Mazda CX-5 I recommend the etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" # e98902 as it offers the most ground clearance. When we installed this on a CX-5 we found that from the ground to the top inside edge of the receiver tube opening is 13-1/2" as shown in the included picture. Since your CX-5 already has a 4-way connector, you can use the Curt Easy Mount Bracket for 4- or 5-Way Flat...
view full answer...
- Can a Trailer Hitch Receiver On a 2005 Dodge Grand Caravan Fit On a 2017 Grand Caravan?The etrailer Trailer Hitch Receiver # e98854 will fit all trims of the 2008-2020 Dodge Grand Caravan. The 2005 Dodge Grand Caravan used a different receiver design. The Curt Trailer Hitch Receiver # 13389 was specific to Stow-N-Go seats while the Curt Trailer Hitch Receiver # C13362 fits without Stow-N-Go seats. I recommend installing the Curt Vehicle Wiring Harness # C56331 when you install the receiver. This 4-way flat connection will control the lights on most small trailers and...
view full answer... - Recommended 4-Way Flat and Bracket for Factory Car WiringThe end you described of the # HM40975-11998 is the standard factory wiring for most vehicles and is called a US car connector. If that is what you have, then you can use the Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector # C55515. If you want a bracket you can use # 18144 and # C57202. Another alternative is the Curt Easy Mount Bracket for 4- or 5-Way Flat Trailer Connector # C58001.
view full answer... - Recommended Trailer Hitch Receiver and 4-Way Wiring For a 2021 Volkswagen AtlasI recommend the Draw-Tite Max-Frame Trailer Hitch Receiver # 76176 for your 2022 Volkswagen Atlas. This receiver has a hidden cross tube for a clean look and 2" receiver to work with a variety of ball mounts and hitch mounted accessories. It has a maximum tongue weight rating of 900lbs and trailer rating of 6,000lbs with or without a weight distribution hitch. Be sure to not exceed the maximum weight rating for your Atlas given by VW. The Tekonsha Draw-Tite Max-Frame Trailer Hitch Receiver...
view full answer... - Comparing the Draw-Tite and Curt Trialer Hitches for a 2015 Audi Q7Aside from the weight ratings of the Draw-Tite # 75950 and Curt # 13220 trailer hitches that fit your 2015 Audi Q7, the Draw-Tite has safety chains loops located directly below the receiver and a welded wiring connector mount while the Curt has safety chain loops that sit to the sides of the receiver and has no mount for a wiring connector. Since both of these trailer hitches exceed the max weight ratings of your Q7 (see page 239 of your owner's manual) the only real advantage that the...
view full answer... - Recommended 4-Pole Wiring Harness and Mounting Bracket for 2016 Hyundai TucsonThe two 4-pole wiring harness kits offered for your 2016 Hyundai Tucson, Curt # C56348 and Tow Ready # 118501, will have an identical installation procedure, but I recommend the Curt since it saves you a few bucks and has a higher current output. This higher output simply means less chance for the trailer lights' power demands from overloading the harness and blowing the included fuse. I have linked an installation video and help article that will show you the entire installation process. If...
view full answer... - Comparing Curt and etrailer Trailer Hitch Receiver For a 2022 Subaru Outback WagonThe only difference between the Curt Trailer Hitch Receiver # C67JR and our etrailer Receiver # e25TR is the gloss powder coat on the Curt versus the matte powder coat on the etrailer. Both will fit your 2022 Subaru Outback the same as we have our etrailer receiver produced by Curt. With the USA made quality and attention to detail of the Curt receiver we know we can stand behind their product as our own. Personally I feel the matte finish on the etrailer blends in best with the fascia...
view full answer... - Recommended 4-Way Vehicle Wiring Harness For a 2022 Hyundai Santa FeI recommend the Curt T-Connector Vehicle Wiring Harness # CU94FR for your 2022 Hyundai Santa Fe. This will connect to the factory connector that is located on the driver's side rear bumper. The Curt Easy Mount Bracket # C58001 will mount on the end of your Curt Trailer Hitch Receiver # C34ER and secure the 4-way connector. This way you do not have to drill holes in to your bumper cover to secure the 4-way connector or worry about it dragging on the ground.
view full answer... - Recommended 4-Way Vehicle Wiring Harness For a 2023 VW TaosI recommend the Upgraded Heavy Duty ModuLite Circuit Protected Vehicle Wiring Harness # C59496 for your 2023 Volkswagen Taos AWD. The Mounting Bracket # C58001 is a great way to secure the 4-way to the end of the Receiver # C38JR. This will reduce the chance of the connector being drug on the ground accidently.
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Written by:
Lindsey S
Video by:
Dustin K
Installed by:
Cole B
Installed by:
David F
Video Edited:
Chris R
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Isabelle B
Updated by:
Carrie F
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Ed
1/13/2020
No issue, the way I had to bend it for it to fit has work out fine, and no issues with the bumper even though it pushes the bumper up a little.