bing tracking image
  1. Trailer Hitch
  2. Draw-Tite
  3. Class III
  4. 2 Inch Hitch
  5. 4000 lbs GTW
  6. Visible Cross Tube
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"

Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"

Item # 75952
Retail:$327.59
Our Price: $189.07
You Save: $138.52
Trailer Hitch

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Shipping Weight: 33 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an E-coat base and a powder coat finish provides excellent rust protection. Great Prices for the best trailer hitch from Draw-Tite. Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" part number 75952 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (543)
  • Q & A (0)
  • Photos

Draw-Tite Trailer Hitch - 75952

  • Class III
  • 2 Inch Hitch
  • 4000 lbs GTW
  • Visible Cross Tube
  • Draw-Tite
  • 600 lbs TW
  • 4000 lbs WD GTW
  • 600 lbs WD TW
  • Custom Fit Hitch

Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an E-coat base and a powder coat finish provides excellent rust protection.


Features:

  • Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
  • Computer-aided, fully welded steel construction ensures strength and durability
  • Tested Tough - safety and reliability criteria exceed industry standards
  • Easy, bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Black powder coat finish covers e-coat base for superior rust protection
  • Stylish, round-tube design
  • Ball mount, pin and clip sold separately


Specs:

  • Receiver opening: 2" x 2"
  • Rating: Class III
    • Maximum gross trailer weight: 4,000 lbs
      • Maximum GTW when used with weight distribution: 4,000 lbs
    • Maximum tongue weight: 600 lbs
      • Maximum TW when used with weight distribution: 600 lbs
  • Limited lifetime warranty


Draw-Tite Tested Tough

Draw-Tite Tested Tough

Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.



Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.


In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.


etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



75952 Draw-Tite Class 3 Trailer Hitch Receiver - Max-Frame

87679 Hidden Hitch Class 3 Trailer Hitch Receiver

Installation Details 75952 Installation instructions

This Product Fits The Following Vehicles



California residents: click here


Customer Satisfaction Score:


Customer Reviews

Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" - 75952

Average Customer Rating:  4.8 out of 5 stars   (543 Customer Reviews)

Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an E-coat base and a powder coat finish provides excellent rust protection.

by:
Nissan

When I need anything to do with trailers or towing, I go to E-Trailer first. They have the parts I need at a great price. The hitch I bought for my sister's Nissan is a perfect fit. Installation was quick and easy, and saved hundreds.

Ray

3/8/2024

Well, while it was easy to install, looks good, and works great for towing, we discovered one drawback. It blocked my backup camera when using it. So long as we dont keep a hitch installed into the receiver, the camera works fine. Otherwise its a great addition.

Etrailer Expert

Mike L.

3/8/2024

@Ray That's actually going to work out better for you. We recommend removing the hitch ball mount when it's not being used to prevent it from corroding and ultimately getting to the point where it's hard to remove.


by:
2015 Nissan Murano

Quality, heavy duty trailer hitch. Shipping was spot on, no missing parts, everything lined up perfect for my 2015 Nissan Murano platinum. Order the wire brush if you don't have one! eTrailers video on how to install was perfect. I'd recommend spending $8 on some quality rust remover spray as my threads were pretty bad. Would definitely recommend!

Jarret

3/27/2022

Product remains solid, its had a good workout in the past year and hasnt budged a bit or fallen off! Win. Quality paint or powder coating too basically zero rust outside of where I dinged it and scratched it deep.



by:
Nissan Murano

Purchased a Curt brand trailer hitch system from trailer.com. The service from trailer.com was outstanding. I received the hitch system within a couple of days after ordering. The Curt hitch system was an easy install on a Nissan Murano Platinum. All of the attachment holes on the hitch frame were a mirror match for the car’s frame holes. The Curt hitch is a brute. We pulled a trailer from Houston to Michigan last May and this month pulled a trailer from Michigan, to Tennessee, and then back to Houston. The hitch system was rock solid. Whether it would be installed by a third party or you are like me, able to do it yourself, I HIGHLY recommend you purchasing any items you need regarding hitches from etrailer.com.

Daniel P.

10/30/2023

Still working flawlessly.



by:

The hitch was very heavy duty and fit perfectly,but,I highly recommend that you get a tap and die kit that matches your frame bolts.The frame holes are most likely going to be very rusty, unless the vehicle is new. Have a professional install your hitch if you're not experienced with a tap and die kit.



by:

Easy to mount on car in minutes and works great. This is my second trailer hitch plus I've ordered bike carriers and other miscellaneous items from Etrailer. One of my favorite vendors.



by:

Love the product experience. Ordering the correct hitch model was simple and delivery was quicker than expected. Instructions for install made it a breeze. Definitely will recommend to friends and family.



by:

I installed the hitch myself with not too much difficulty while laying on the ground under the car. The only issue I found was that the center hole on the left side was a little off-center. That was the most difficult part getting the bolt threaded. Took about 1.5 hours with no lift and only one person.



by:

Good product but the paint is terrible. I know this item ends up on the bottom of my car but I don't want it to be be a rusted mess in two years. As I was taking the stickers off with some mineral spirits -- half the paint came off on the rag. It was clear that someone touched up the factory powder coat with regular black paint as it just wiped off and revealed a host of scars - powder coat does not wipe off..These were not just shipping scars..it was clearly touched up at some point prior. I ended up buying a can of spray primer and a can of 3M rubberized undercoating. I hit all the scared area with primer then sprayed the whole thing with undercoating -- this should protect it for a few years and I actually prefer the matte finish to the original glossy black paint.

Greg Z.

5/28/2016

This was a great purchase and so glad I applied undercoating to it before I installed its takes a beating it would already be rusting if not...



by:

I ordered this hitch for my 2019 Murano. The holes under the body we’re pre drilled so no need to drill any holes. All the hardware came with the hitch and was very simple to install. It took longer to find a 1/2 inch drive socket and extension in my toolbox than it did to actually install it. With the help of my 11 years old we got it installed less than 15 mins. Great product shipping was fast and customer service was above my expectations. Thank you for the great product and I’ll be doing business in the future. I can’t thank you enough.

Harold

8/13/2021

Its working out great



by:
2015 Nissan Murano

Hard to ship a heavy item and have it not puncture through the box. This one lost a little paint on the way but was easy enough to touch up. I didn't care for the placement of the brand label, etrailer label and data lable. (Only the brand label was straight.) So I relocated them (easy enough). Installation was straight forward. While I didn't have to drop the muffler, I found that it was easier to start with the passenger side mount. Looking at the finished installation, I feel it would look more finished if it hugged up closer to the bottom of the bumper. All in all, it is a good value.

Jesse

2/24/2020

1 year follow up. Im still happy with this product. The paint seams to old up well and there hasnt been any rust issues.



by:
2015 Nissan Murano

I purchased a hitch and wiring harness for my 2015 Murano. The harness was so simple to install and incredibly cost effective, truly plug and play. The Draw Tite hitch is well designed and looks great on the vehicle.
The only problem I had was due to a four year old vehicle that has gone through as many winters with salt on the road. The factory weld nuts were closing up with rust scale. I used 30 caliber gun bore brushes on a drill to clean the scale along with WD40, l went through eighth of them. Once that was done I slathered white lithium grease in and on everything and the install was truly 15 minutes after that.
I will recommend etrailer to anyone who will listen, great products at even better price with free shipping.
If you installing a hitch on a vehicle that has been through the rust belt be a realist and be prepared to spend a little time prepping.

Etrailer Expert

Mike L.

7/16/2019

An M12 x 1.25 thread tap, will make short work of rusted threads.



by:

It was a great experience ordering online with etrailer, very easy and quick delivery, ordered Monday and arrived Thursday, and the hitch was perfect along with the wiring harness, got everything installed in about an hour, very easy. Very happy,



by:
2018 Nissan Murano

Perfect fit , only tools listed needed for install. My main uses will be for cycle rack
& all works well so far. Only one compliant , this hitch will not allow my lift gate kick feature to function. Early on I asked the question would it interfere , and was told all should be good, this information came from a representative from Draw-Tite I believe. Other than my issue with lift gate I would recommend this hitch & etrailer for future purchases.

Thanks

Etrailer Expert

Mike L.

5/16/2018

Typically, when a hitch is installed, the hitch will block one or two of the several sensors that actuate the liftgate, specifically the ones in the middle. Therefore, youd want to try off to either side of center. Also, try varying the motion of your foot under the vehicle. Draw-Tite tells me that usually a sweeping motion that goes a little deeper under the vehicle will the trick.



by:

Good quality construction. Easy installation, maybe 20 minutes. Package was tore up and hitch had scratches on it so could have been packaged with more protective wrap. Overall very happy and satisfied with hitch, will mainly use it for bicycle rack.

Doug M.

8/17/2016

Excellent! Mechanically great, Visually paint is holding well. No complaints!



by:
2016 Nissan Murano

I received a trailer hitch for my 2016 Nissan Murano in a box in great condition. There were no scratches or anything on the black paint, and, of course no rust. It literally could not have been easier to install. It lined up perfectly with the predrilled holes on my car. I'm a petite lady and had it installed in about 15 minutes, with only my 12-year old son helping for just a minute to hold up one end for me. In hindsight, I don't even think that was necessary, but it help make it a cinch. It has a pretty low profile, so doesn't hang down too far and doesn't stick out past the back of my vehicle. I think it looks great. I don't think the Nissan factory hitch could be any better. It's been on my car for about a year now and still looks as good as new



by:

Great Hitch. I like the Low Profile. 1-10 on Installation Scale, I give it a 3. It was fairly easy. How ever minus the Hitch, installing the Wiring Harness using a Flat 4-wire Harness might require some patience on the Dodge Ram Pro Master City.

Tl

4/14/2023

Its been a Great Hitch! I tow my 5x8 trailer with it a lot. I even towed a 16 Pop-up Camper from Shreveport, LA to Little Rock, AR with know problem. Its been a 5 Star hitch since installation.



by:

The hitch is great quality and relatively easy to install with two people. One person needs to hold it in place while the other bolts it on with 5 bolts. It seems very solid. I was disappointed that it came damaged in numerous places because the box was obviously not handled well by UPS. The original paint was scraped off and I believe could have been avoided had they wrapped it first in bubble wrap. To avoid having to send it back at my expense, I accepted a $10 credit to buy spray paint. Way to make your problem mine and sell it as you doing me a favor (then you’ll have the paint for touch-up in future years).

Etrailer Expert

Jenny N.

12/1/2021

When the hitch is installed on the vehicle over time road debris will cause nicks and scratches. It is a good idea to have a can of rust resistant paint on hand for hitch maintenance.



by:

From the get-go I was skeptical about buying a hitch online but etrailer.com did a fantastic job getting the hitch delivered in just under 4 days. Not bad for a heavy piece of metal. Got the hitch and wiring harness installed today. Honestly I'm kinda diggin' the fact that it isn't as hidden as my 2013 Mo hitch was. I kinda like the look of it (minus all the stickers) of course but I will be removing those post haste (sorry e-trailer). Maybe if you give me 100.00 store credit I will think about advertising for you. Any way, all in all I'm very pleased with the hardware and the service I received from e.trailers.com



by:

Bolted up nicely to our Murano. Had a friend help me hold the hitch up as it is heavy to hold in place and insert bolts. Wiring harness was simple to install and worked first time. Pulled a uhaul all over bumpy streets in Charlotte and the hitch performed solid.



by:
2018 Nissan Murano

Super Easy install and instructions were spot on. Instructional videos are very thorough. I absolutely advise you take the time to make sure the threads are clean as suggested in the video. This will make starting the bolts much easier. The passenger side is a bit tight with regard to maneuvering the hitch into place. Can't believe some of the quotes I got from local retailers to install (with all respect to their expertise and business acumen).

Ray

3/18/2023

Still humming along. No issues or concerns with the receiver!



by:
2017 Nissan Murano

The entire process was perfect! Great pricing and free delivery. Just purchased a 2017 Murano AWD and decided to do the hitch myself. Opted for the Draw Tite for the added tongue weight. Using for mostly hitch mounted bike rack. Installed in about 30 min by myself. Fit perfect and looks great. Box was a little damaged where the mounting brackets were, but no finish issues. Etrailer and Draw Tite met all my expectations.



by:
2016 Nissan Murano

everything arrived and in excellent condition. everyone i spoke with at your company was very customer concerned and knowledgeable. the assembly instructions and video was of great assistance. the total installation time include getting to the factory wiring harnesses getting everything connected and mounted was 2 hours.

rudy dipietro



by:

Nissan engineers are ahead of Ford! R
ecently
I purchased a hitch for a 2020 Ford Escape, slight modifications were required to the subframe to "fish" bolts through. The installation of this hitch to the 2021 Murano was MUCH easier, as the "nuts" were already in place and you just needed to put the bolts in & tighten!

Watched etrailer videos before deciding which hitch to go with. Although the car is only rated for 1,500#, this one has both higher weight and tow capacities... all of them were basically the same price, so easy decision.

Same with the "T" wiring harness... well thought out EASY to install!



by:

Received as scheduled. Unpacked it, was in excellent condition. Installed alone in 15 minutes. Placed the left side of the hitch on a gallon paint can to bring it up close to the frame, seated the right side of the hitch to the frame, and installed the two bolts..loosely. Then installed the left side (3 hole). Went back and tightened all the bolts to spec. Looks great, ready to install bike rack. Highly recommend. Great service, great product, fits perfectly.



by:
2015 Nissan Murano

Ordered this hitch with wiring and received it within a few days. It was very easy to install, exactly how the video showed. It told about 40 minutes from opening till towing my boat. The lighting wires installed so fast I couldn't believe. I highly recommend this hitch with the wiring kit.


25
543
Show More Reviews

See what our Experts say about this Draw-Tite Trailer Hitch

  • Best Hitch and Cargo Carrier for 2015 Nissan Murano
    For your hitch receiver, I recommend the Draw-TiteTrailer Hitch Receiver # # 75952. It's similar in design with the other hitches from Curt and etrailer, but this one has a 600 lb tongue weight capacity while the others have 350 lbs. If you are carrying 300 lbs of cargo plus a 48 lb cargo carrier, you'll come close to maxing out the other hitches. Next, for the cargo carrier, I recommend the 24x60 etrailer Cargo Carrier # e98874. It has mesh, it folds, it tilts, and it can carry up to...
    view full answer...
  • How to Lock and Secure the Swagman XC 2-Bike Rack Part # S64650
    The Swagman XC 2-Bike Rack part # S64650 will work with the Draw-Tite Max-Frame Trailer Hitch Receiver part # 75952 on your 2014 Nissan Murano as it includes the 1-1/4" to 2" adapter like you mentioned. The two large holes on the trailer hitch are for use with safety chains while towing and will not be used with this bike rack. In order to both lock the hitch to the rack and the rack to the vehicle you are going to want to use the Anti-Rattle Hitch Lock and Cable for Swagman Bike Racks...
    view full answer...
  • Is Torque Wrench Needed When Installing Draw Tite Hitch on 2020 Nissan Murano
    I can't recommend you attempt to install the Draw Tite hitch part # 75952 that you referenced on your 2020 Nissan Murano without using a torque wrench to get the hardware to the correct torque spec, but you have a few pretty easy options. If I were you I would go to a local car parts store and ask about renting/borrowing one. Typically they'll let you borrow on for a couple hours really easily. Another really easy option is our Powerbuilt Torque wrench part # ALL644044 which you could...
    view full answer...
  • Trailer Hitch and Wiring Recommendation for a 2021 Nissan Murano
    We have several options for your 2021 Nissan Murano. There is the etrailer, # e98907, Draw-Tite, # 75952, and the Curt # C13205. I recommend the etrailer, # e98907 with its matte black finish that hides inevitable scratches etc. from road debris. Please note the linked product review and installation video I attached below of the etrailer hitch being installed on a 2020 year model Nissan Murano. If you intend to use the hitch for towing and not just for a bike a rack or cargo carrier,...
    view full answer...
    Image 1 for
  • Can Trailer Hitch be Used on Vehicles with Factory Hitch
    Yes, some factory trailer hitches are welded onto vehicles, which is likely the case with your 2015 Nissan Murano. We don't have any type of specific list of vehicles with welded-on hitches but it unfortunately sounds like this is what is happening for you. In regards to fit, aftermarket hitches such as the Draw-Tite Max-Frame Trailer Hitch Receiver # 75952 and Curt Trailer Hitch Receiver # C13205 which fit your '15 Murano are designed to fit vehicles that do not already have a factory...
    view full answer...
  • Trailer Hitch Recommendation for 2018 Nissan Murano
    For your 2018 Nissan Murano the Draw Tite hitch part # 75952 is the best option. It has the best towing capacities at 4,000 lbs trailer capacity and 400 lb tongue weight as well as best price. I attached an install video for this hitch for you to check out as well. For trailer wiring you'd then want the # 118660 which is our most reliable trailer wiring option we have. I attached an install video for you to check out as well. If you wanted to do some towing you might be interested in...
    view full answer...
  • What are Torque Specs for Draw-Tite Class III Trailer Hitch on 2015 Nissan Murano
    Since manufacturers sometimes make small changes to the instructions we try to refrain from posting specifics for torque ratings on a page like this but I have linked the written instructions for the Draw-Tite Max-Frame Trailer Hitch Receiver # 75952 that fits your 2015 Nissan Murano and you can find the current torque specs in step 3. I have also attached an installation video of this trailer hitch on a '15 Murano that you can check out.
    view full answer...
  • Does the 2017 Nissan Murano Come Standard With a Trailer Wiring Harness
    The Nissan Murano does not come standard with any type of wiring to allow you to provide lights on a towed trailer; if there is a "towing package" available for that model, that package would come with the trailer wiring harness and hitch installed. If you don't have the towing package and need to install a wiring harness on your 2017 Murano I recommend using the Tekonsha T-One # 118660 since we've found that the Tekonsha harnesses are a bit more reliable over time than others. If you...
    view full answer...
  • Availability of Concealed Hitch for 2017.5 Nissan Murano
    There are only two hitches which will fit your 2017.5 Nissan Murano, the Curt # C13205 and Draw-Tite # 75952. Though neither hitch is going to be concealed, they are both underneath the bumper and are by no means the first thing that will be noticeable on your Murano. Of the two hitches, I strongly recommend the Draw-Tite # 75952 because the Curt hitch requires the use of stabilizing straps with a bike rack in order to keep the warranty valid, while the Draw-Tite does not. If you are looking...
    view full answer...
    Image 1 for
  • Draw-Tite 75952 Class III Trailer Hitch Fit on 2017.5 Nissan Murano Platinum
    With hitch fits the opinion that matters most is that from Draw-Tite, the manufacturer. On that other marketplace website products are sold by all sorts of folks, some of whom may have less direct technical understanding than the specialists like Draw-Tite and etrailer. Draw-Tite shows 2-inch Class III hitch # 75952 as a confirmed fit but I also called my technical contact there to confirm. This hitch also fits the mid-year 2017.5 model.
    view full answer...
  • Does Draw-Tite Trailer Hitch Interfere With Hands-Free Liftgate on 2019 Nissan Murano
    You will absolutely still be able to use the hands-free liftgate feature when installing the Draw-Tite Trailer Hitch # 75952 on your 2019 Nissan Murano. You will want to kick your foot to either side of the hitch as opposed to the center; doing this will allow the rear hatch to open on your '19 Murano. I have added a link to a video showing this hitch being installed on a 2019 Nissan Murano for you to check out as well. Additionally, if you plan on towing and need to add a wiring harness,...
    view full answer...
    Image 1 for
  • Will a Trailer Hitch Interfere with the Hands-Free Rear Hatch on a 2018 Nissan Murano SL
    I spoke with my contact over at Draw-Tite about trailer hitch # 75952. They have not had any complaints about the hitch interfering with the hands-free rear hatch on the 2018 Nissan Murano. Usually if there is a problem it is just a reduced area that the sensors can detect so you may have to kick your foot out in a different location than you are used to. If you plan on doing some towing I recommend etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise...
    view full answer...
  • Will a Kuat NV or Sherpa Bike Rack Clear Back of 2015 Nissan Murano with Hidden Hitch Trailer Hitch
    Hidden Hitch trailer hitch # 75952 is one of the hitches that will fit your 2015 Nissan Murano. When installed we found that the distance from the center of the hitch pin hole back to clear the rear of the vehicle is 4-1/4 inches, see video link. The Kuat NV # NV22G measures 7 inches from the pin hole to the nearest part of the rack when folded up so it will clear the rear of the Murano easily. Given that there is ample clearance with this rack I recommend it. The Sherpa # SH22B measures...
    view full answer...
  • Recommended Hitch Cargo Carrier for 2015 NIssan Murano with Draw Tite Hitch
    For your 2015 Nissan Murano with a Draw Tite hitch part # 75952 the Pro Series Hitch part # 63153 would be a great choice. The only other option you might consider is a folding carrier like the part # C18151. This is basically the same price and will allow you to fold the carrier up and out of the way when not in use. I also checked and this would have enough clearance to fold up on your vehicle.
    view full answer...
  • Why Does Trailer Hitch for 2018 Nissan Murano Have Higher Capacity Than Vehicle Does
    Draw Tite and Curt/etrailer rate their hitches independently from one another which is why it's often that the hitches will be rated for different capacities. This is why the Draw Tite hitch part # 75952 is rated higher than your 2018 Nissan Murano. The overall towing capacity is always the lowest rated component in the setup as you are only as strong as your weakest component.
    view full answer...
  • Does Battery Have to be Disconnected to Install Wiring Harness in 2020 Nissan Murano
    Thanks for the purchase of the Draw-Tite Trailer Hitch # 75952 and Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C56267 for your 2020 Nissan Murano. And yes, you definitely should disconnect the negative battery terminal before installing the harness; pulling the towing fuse would not have the same affect. The reason is if you don't disconnect that battery harness there is a possibility of a short that could damage the harness or other electrical systems...
    view full answer...
  • Trailer Hitch and E-Bike Rack Recommendation for 2021 Nissan Murano
    For carrying heavier e-bikes the hitch that fits you 2021 Nissan Murano that has the highest tongue weight capacity is the Draw Tite part # 75952 which is rated for 600 lb tongue weight. I attached an install video for this for you to check out as well. Then for an e-bike rack the Thule EasyFold XT part # TH903202 would be a great option that folds up for easy install and removal and also comes with a ramp to make loading the bikes easier as well. Check out the review video I attached...
    view full answer...
  • Bolt Size for Draw Tite Hitch that Fits 2015 Nissan Murano
    The size of the bolts that secure the Draw Tite hitch part # 75952 to your 2015 Nissan Murano are M12x1.25x40 CL10.9. We also sell replacement hardware for all of the hitches we offer with the part # RHK.
    view full answer...
  • Trailer Hitch Recommendation for a 2020 Nissan Murano
    Yes, all of the trailer hitches for a 2019 Nissan Murano will fit your 2020 Nissan Murano. Out of the Draw-Tite # 75952, Curt # C13205, and etrailer.com # e98907 I recommend the etrailer.com trailer hitch because it has a matte black finish which is not only more aesthetically pleasing than the glossy black finish of the other options, but it also does a better job of hiding any scratches or dents that might occur from road debris. Attached is an installation video of this hitch on a...
    view full answer...
    Image 1 for
  • Why Is There Weight Capacity Differences for Hitches that Fit 2019 Nissan Murano
    Draw Tite and Curt/etrailer rate their hitches independently from one another which is why it's often that the hitches will be rated for different capacities. There also can be subtle design differences that are hard to notice but mostly it's just that there's a different process and sometimes one manufacturer rates more conservatively than the other which is why the Draw Tite # 75952 has the highest capacity for your 2019 Nissan Murano.
    view full answer...
  • Best Trailer Hitch Receiver and Vehicle Wiring Harness For a 2024 Nissan Murano
    I feel the Draw-Tite Max-Frame Trailer Hitch Receiver # 75952 is the best option for your 2024 Nissan Murano. This receiver uses the more common 2" receiver opening and includes a mounting tab for securing the wiring connector. The receiver is also rated to be used with a Weight Distribution Hitch # EQ37060ET if you are towing larger trailers. The Curt Wiring Harness # C56267 will provide you a 4-way flat connector which is most commonly found on small trailers. It will also allow for...
    view full answer...
    Image 1 for
  • How To Attach 4-Pole Trailer Connector To Draw-Tite Hitch On 2017 Nissan Murano
    In order to attach a trailer connector like the Curt T-Connector Vehicle Wiring Harness part # C56267 to the Draw-Tite Max-Frame Trailer Hitch Receiver part # 75952 for a 2017 Nissan Murano all you will need is the Mounting Bracket 4-Pole Flat part # 18144.
    view full answer...
  • Install Bolts Provided With Draw-Tite 75952 Class III Hitch Seem Too Large in Diameterr
    You should have received M12 x 1.25 x 40mm bolts with the Draw-Tite # 75952 Class III hitch. I've been here almost 15 years, and I can state with confidence that it's extremely rare for the wrong hardware to get sent out with a hitch. There's a much more common occurrence that is most likely causing the difficulty you're having. The installation bolts included with the hitch are designed to fit into the M12 x 1.25 nuts that are welded into the frame members of your 2017 Murano. If you...
    view full answer...
  • Recommended Trailer Hitch for a 2020 Nissan Murano
    The Draw-Tite Max-Frame Trailer Hitch Receiver part # 75952 is what I recommend for a 2020 Nissan Murano because it has a durable powder coated finish that will look very nice on the rear of a Murano (see photo) and it has an integrated trailer connector mounting tab which cuts down on the total numbers of parts needed for towing. The Draw-Tite hitch offers bolt-on installation with no cutting or drilling required therefore you aren't making any permanent modifications to the vehicle. If...
    view full answer...
    Image 1 for


< Previous



Do you have a question about this Trailer Hitch?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Lindsey S
Written by:
Lindsey S
Employee Joshua S
Video Edited:
Joshua S
Employee Jacob T
Video Edited:
Jacob T
Employee Chris R
Video Edited:
Chris R
Employee John S
Video Edited:
John S
Employee Nicholas E
Test Fit:
Nicholas E
Employee Randy B
Test Fit:
Randy B
Employee Brent H
Test Fit:
Brent H
Employee Shane H
Test Fit:
Shane H
Employee Ryan G
Test Fit:
Ryan G
Employee Matthew B
Test Fit:
Matthew B
Employee Laura H
Updated by:
Laura H
Employee Leah S
Updated by:
Leah S
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Amanda M
Updated by:
Amanda M
Employee Isabelle B
Updated by:
Isabelle B
Employee Zach D
Video by:
Zach D
Employee Jonathan Y
Video by:
Jonathan Y
Employee Samuel H
Video by:
Samuel H

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.