Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
(283 reviews)
Price: $237.25
In Stock
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
Item # 75679
Retail:$423.91
Our Price: $237.25
You Save: $186.66
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (283)
- Q & A (0)
- Photos
Draw-Tite Trailer Hitch - 75679
- Class III
- 2 Inch Hitch
- 4000 lbs GTW
- Visible Cross Tube
- Draw-Tite
- 400 lbs TW
- 4000 lbs WD GTW
- 400 lbs WD TW
- Custom Fit Hitch
Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.
Features:
- Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
- Computer-aided, fully welded steel construction ensures strength and durability
- Tested Tough - safety and reliability criteria exceed industry standards
- Easy, bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Black powder coat finish covers e-coat base for superior rust protection
- Stylish, round-tube design
- Ball mount, pin and clip sold separately
Specs:
- Receiver opening: 2" x 2"
- Rating: Class III
- Maximum gross trailer weight: 4,000 lbs
- Maximum GTW when used with weight distribution: 4,000 lbs
- Maximum tongue weight: 400 lbs
- Maximum TW when used with weight distribution: 400 lbs
- Maximum gross trailer weight: 4,000 lbs
- Limited lifetime warranty
Draw-Tite Tested Tough
Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.
Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.
In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
75679 Draw-Tite Class 3 Trailer Hitch Receiver - Max-Frame
87571 Hidden Hitch Class 3 Trailer Hitch Receiver
Installation Details
This Product Fits The Following Vehicles
- 2009 - 2019 Ford Flex with Dual Exhaust
- 2009 - 2019 Ford Flex without Dual Exhaust
- 2010 - 2019 Lincoln MKT with EcoBoost
- 2010 - 2019 Lincoln MKT without EcoBoost
California residents: click here
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Did not fit
- Wrong item was ordered
- Product did not meet expectations
Customer Reviews
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" - 75679
Average Customer Rating: 4.7 out of 5 stars (283 Customer Reviews)
Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.by: Amy05/02/2024
My husband told me there were no instructions or hardware. When I went out to help, I noticed they were wrapped into the receiver! Guess which of us is more observant.
by: Ken T05/10/2019
2014 Lincoln MKT
It took me about two hours to install the trailer hitch by my self. A second person is really needed. The only problem I had is you have to start the driver side first or the bolt holes don't line up. It's a really tight fit against the cargo compartment.
Once you get it on it is a perfect
Overall it I give it 5 stars.
by: RYoung06/24/2015
Ford Flex
Bolted right in place. The only problem was getting the paint/undercoating out of the other holes on the Flex frame. That took longer than bolting the hitch on.
Ryoung
6/23/2016
Hitch is still working fine after a year. We use it for or bike rack almost every weekend.
by: Frank from PA 06/13/2018
2017 Ford Edge
ordered this for my 2017 AWD Flex EcoBoost with dual exhaust, I went with the Drawtite brand due to having two other Drawtite hitches in the past... it shipped same day and arrived on time as indicated on my confirmation email.
the packaging surprised me as it was in a “generic”/universal type box, which I would assume fits a multitude of different model hitches (most bigger than this one) it did have a thin plastic cover over the receiver area to protect the powder coat, despite it being lose in the box in was in good shape.
I watched the video and figured that installing it myself shouldn’t be a problem... the installation took around a hour and went pretty much like the video, my 2017 has two exhaust hangers inboard of the rear lower control arms instead of one centered as in the video, but really not a big deal as far as the install.
with all four exhaust hangers in place and the hitch torqued to spec l lowered the Flex down and noticed that the exhaust tips were no longer centered in the valance, upon inspection the issue was clear... a reinforcement bar on the hitch was coming in contact with the hanger on the passenger side and would need to be “clearanced” to allow the exhaust tips to be centered while the exhaust is in a “relaxed position.
without any room to work on the hitch while it was installed I had to remove it and grind off the edge of the reinforcement bar to allow for proper fitment
So after installing, uninstalling, grinding and reinstalling MY total install time was around 3 hours, inspite of the extra work the receiver fits closely to the valance and is not obtrusive.
this hitch came in at about half the price as the factory one from my dealer and should be more than sufficient for my bike rack and 5x8 trailer
by: Terry 02/12/2024
2016 Ford Flex
It is a well made hitch and easy to ins tall
by: Bucky06/01/2016
2009 Ford Flex
Bolting on the hitch took about 15min and was easy to do with the bolts provided and after watching the quick video on installing it. Wiring it up on the other hand took a while. The instructions that came with the electrical was easy to follow and super helpful...finding a path for the wires underneath the car from the battery back to the hitch is what took the longest.
by: cutcsa 5508/02/2019
I was checking on the internet to get a new trailer hitch for my 2014 Lincoln MKT.
I got my part and it fits perfectly, I am way super satisfied and will definitely buy from etrailer again! The how-to videos are great. This made installation a little more comfortable. Especially when you do not perform this type of work every day. The parts were of high quality and are working as expected.
Thank you
by: Kim02/08/2018
Ford
Great looking and fairly easy to install. I would recommend having a second person to help lift and hold it in place. It is quite a chore doing it by yourself. I used a couple of jackstands to help support the weight of it while installing, but another's help would have been great. Sal at etrailer was most helpful in taking my order and answering all of my questions. When it was all done, I was happy with the way it looked. I don't think it hangs too low, especially since it was a fraction of the cost as an OEM one from Ford.
by: Sam02/18/2023
2008 Ford Crown Victoria
Problem is with etrailer not the actual product. It wad packaged carelessly and that caused damage in shipping. Not to mention I could've ordered the same product from [online] and had it in 2 days instead of the 8 days it took etrailer to ship. The product itself was fine, the 1 star review is for etrailer itself. Took over a week to receive my order from the time it was placed. Had I known I would be waiting that long I would've just ordered from [online]. Once I finally received my order my hitch was thrown into a box that was way too big for it along with the wiring harness I ordered smashed under the hitch inside the box. No protective packaging of any sort, just 2 items haphazardly thrown into a huge box to bounce around across the country. Wiring harness was still usable but the packaging and instructions were crushed and destroyed as well as my hitch arrived slightly bent and had several large chips in the powder coating. Needless to say I believe this will be my first and last order from etrailer
Jenny N.
2/20/2023
I am sorry to hear about the rough condition that the hitch and wiring arrived in. I will have our Customer Service team reach out to you.
by: John06/19/2021
2019 Ford Flex
Thank you for getting my items out to me so quickly. I've been having issues finding the right tow package for my vehicle. I had to send 2 back when I tried ordering from other places.(both auto part companies)Neither ask the right questions about my vehicle. It was nice to deal with such professionalism from the employees at etrailer.#1 They asked the right question about my vehicle to be sure it fit correctly & #2 They got my item to my door step fast. My only regret was I didn't deal with etrailer 1st and save myself a lot of time and headaches. Thanks Again...
Sincerely,
by: Christian j05/30/2015
2014 Ford Flex
I have to say after reading some other reviews before I had received my trailer hitch. I felt I would either have an easy or difficult install. I had done the install by myself and it took less then an hour. Over all the products are great and it was a smart choice to buy from entrailer.
by: Vince09/16/2016
2016 Ford Flex
Good product. Fits exactly as expected. Installation took about an hour as expected too. Only one issue which is why I gave it 4 stars. After it was installed, I tried to insert the pin and it wouldn't go through. After closer inspection, there was a metal burr restricting the pin from passing through, so I had to use a metal file to file down the burr to allow the pin to pass through properly. See attached photo. Other than that, no issues. Also, the instructional video was VERY helpful and made the installation quite easy to do.
by: Alejandro03/28/2018
2015 Ford Flex
Product was high quality well made easy to install with instructions. The wiring kit was Plug and Play.
It looks factory installed.
by: John05/05/2023
2016 Ford Flex
The Draw-Time trailer hitch went on without a "hitch". The process of ordering the correct components (hitch, wiring harness and 4 pole plug mount) for my 2016 Ford Flex was nearly effortless with only one call to clear up one concern. etrailer's videos that were vehicle and product specific made for a great experience. Thanks
by: D08/27/2020
2017 Ford Flex
The receiver was a little dinged up with spots of powder coating chipped off but... it’s a trailer hitch. The install was simple and as directed in the videos.
by: James C06/25/2015
Good, sturdy hitch. Fit perfectly with no problems. Easy to install, took about 30 min with no other help.
Only negative is that it really isn't hidden as the bars to the side hitch is visible from behind.
Received the hitch in 3 business days as promised.
by: Joshua04/17/2018
2014 Ford Flex
Excellent fit. Installed myself in about 25min. Main use is for a bike rack.
by: John08/25/2021
Perfect fit and as a master mechanic of 25 years the installation was easy, the only thing was I wish I had a drive on lift and a hydraulic jack. Doing it on the ground was no fun and it took about 2 hours but it’s in and everybody happy. Thanks
by: Adam12/11/2017
Ford Flex
I was afraid of doing this myself but after watching the video and taking a quick look at the pictures, I ordered the hitch. So easy to install! Looks amazing too. Can't wait to get outside and start using it.
by: Zephyr Eadon12/15/2019
Install went well enough, the reason for the low rating was for the fact the hitch after installation was not square to the vehicle.
by: Bill03/03/2022
Easy installation instructions and works as described.
Bill C.
3/4/2023
Hitch has worked as described. If I need any additional hitches, your company will be my first choice.
by: Terry B03/13/2014
Came as described, purchased the wiring harness as well. Finished install in less than an hour.
by: Frank12/08/2017
2009 Ford Flex
The hitch went on my 09 Flex without any problems. Very easy install, fast shipping, great value, and excellent customer service.
by: Steve 08/22/2021
2010 Ford Flex
Very prompt delivery and a very sturdy product, the hitch receiver is very solid/heavy. Didn't take too long to install. My install was on a 2010 Ford Flex without twin exhausts. One note to mention is that there is no need to undo the rubber exhaust hanger as its main mounting bracket has to be removed as part of the hitch installation.
Steve
8/23/2022
Still going strong, I initially used it for a bike rack but am now towing a trailer with it.
by: James F03/17/2023
Ford Flex
Great experience - added a trailer hitch on my Fire Flex. I had choices, good prices and lots of info (including installation instructions). The install was very easy. Highly recommend!
25
284
Show More Reviews
See what our Experts say about this Draw-Tite Trailer Hitch
- Torque Specifications for Installing Draw-Tite Max Frame Trailer Hitch Receiver # 75679When installing the Draw-Tite Max-Frame Trailer Hitch Receiver # 75679 referenced in your question, you will torque all M12 x 1.75 CL8.8 fasteners to 68 lb ft. I have included the complete installation details that you can also look through. All of the necessary hardware is included with the trailer hitch.
view full answer... - Available Trailer Hitch Receivers for 2010 Ford Flex For your 2010 Ford Flex only the higher-capacity 2-inch Class III type hitches are offered. We have no 1-1/4-inch hitches for this vehicle from any of our suppliers. This is not a bad thing! Since you have the single exhaust version of the Flex the hitch I suggest for you is Draw-Tite # 75679 if you have the EcoBoost model. If you do not have this feature then instead you can use the Curt # 13551. Install videos for both are linked for you along with a helpful article covering hitch installation....
view full answer... - Trailer Hitch Recommendation for 2016 Ford Flex with Dual ExhaustFor your 2016 Ford Flex with dual exhaust we have the Draw Tite hitch part # 75679 that is a confirmed fit and will work well. It actually fits the versions of your vehicle that have dual exhaust and the versions that do not. The picture I attached shows the hitch installed on a version that has the dual exhaust. I also attached an install video for you to check out as well.
view full answer...
- Trailer Hitch and Wiring Recommendation for 2013 Ford Flex with Dual ExhaustThere are trailer hitches available for the 2013 Ford Flex with dual exhaust but they are not rated for 5,000 lbs. The trailer hitches for the Ford Flex with dual exhaust are both rated for 4,000 lbs. The hitches are designed to fit around the dual exhaust system which could be why their rating is a bit lower. It is a good idea to check the owner's manual for how much the vehicle itself is rated to tow because it may be under what either hitch is rated for. I recommend Draw-Tite part #...
view full answer... - 2 inch Trailer Hitch Recommendation for 2013 Ford Flex with Dual ExhaustFor your 2013 Ford Flex with dual exhaust the Draw Tite hitch part # 75679 is a confirmed fit and has a 2 inch opening like what you need. It has a 4,000 lb towing capacity which is the highest towing capacity option we have. I attached an install video for this hitch for you to check out as well. For trailer wiring you'd then want the part # 118472 which is also a confirmed fit. If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with...
view full answer... - Any Fascia Trimming for Installation of Draw-Tite Class III Hitch # 75679 on 2010 Ford FlexAccording to the installation instructions, there is no fascia trimming or other modification necessary to install the Draw-Tite Class III # 75679 hitch on your 2010 Ford Flex. You can see the installation instructions and view an install video by clicking on the provided links.
view full answer... - How to Pick Out the Correct Rise/Drop Ball Mount to Tow Trailer LevelIn order to pick out the correct rise/drop ball mount you need to take a couple measurements and do one simple calculation. Basically you want to go with the ball mount that will allow your trailer to be towed level. To pick out the correct one you will need to measure the distance from the top of your hitch opening to the ground and then with your trailer sitting as level as possible measure from the bottom of the coupler to the ground. The difference between these two measurements will...
view full answer... - Trailer Hitch For 2018 Lincoln MKT For Towing a 4,000 Lb TrailerI was able to confirm that the Draw-Tite Max-Frame Trailer Hitch Receiver part # 75679 is a fit for the 2019 Lincoln MKT which is the only option. It is a great option with a custom fit design that does not require drilling into the frame of the Lincoln MKT. This will give a 2" receiver on the Lincoln that can tow 4,000 lbs however you do want to check the owner's manual to make sure you can tow 4,000 lbs safely. For the trailer wiring, I recommend 7-way plug part # A10-7072VP which will...
view full answer... - Recommendation for a Hitch and 4 Bike Rack for 2014 Ford FlexI recommend the Draw-Tite Class III Hitch, # 75679, for your 2014 Ford Flex. This 2 inch hitch receiver will bolt directly to your Flex's frame with no welding required. It has a tongue weight rating of 400 pounds and a maximum gross trailer weight rating of 4000 pounds. If you are still in the market for a four bicycle rack, the Swagman Original # S64400, is quite popular with our Ford Flex owners. This economical option offers the highest weight capacity at 140 pounds. If you will be...
view full answer... - Trailer Hitch for Flex and Towing Accessories for 2011 Ford FlexThe Draw-Tite Class III receiver hitch, part # 75679 weighs about 36 lbs, or 40 lbs as shipped. The hitch has a 4000 lb towing capcity and a 400 lb tongue weight capacity. If the towing capacity of the vehicle is less than that, you'll want to abide by the lowest rated component. If you'll be using the hitch for towing, you'll need a few other items to complete your towing system. Trailer wiring harness, part # C56343 or # HM40975 if the vehicle is equipped with the factory tow package. Ballmount...
view full answer... - Higher Capacity Trailer Hitch for a 2013 Lincoln MKT with Factory 1-1/4 Inch Trailer HitchIf the hitch is rated for 2,000 pounds gross trailer weight then the tongue weight capacity will be 200 pounds, possibly 300 pounds. Either way the motorcycle carrier and motorcycle itself are exceeding the tongue weight capacity of the hitch. A higher capacity trailer hitch such as # 75679 is definitely recommended (as long as the factory hitch is not welded on). It looks like in the owner's manual that the hitch itself determines the towing capacity of the vehicle. So if you switched...
view full answer... - Difference Between Hidden Hitch 87571 and Draw-Tite # 75679Part 87571 and # 75679 are the same hitch. Hidden Hitch was a brand owned by the same company that has since dissolved, so the hitch labeled with the Draw-Tite sticker and number is now the part number for both. The brand name was the only difference so now they just all have the Draw-Tite sticker so if you have found a Hidden Hitch it is just old stock. I've attached a video of the installation for you.
view full answer... - Trailer Hitch and Wiring for a 2013 Ford Flex with Dual ExhaustYes, Draw-Tite trailer hitch # 75679 will fit a 2013 Ford Flex with dual exhaust. Having EcoBoost or not does not matter. It also fits models with single exhaust. I have included links to the installation instructions and a link to a video showing a typical installation for you. If you plan on doing some towing I also recommend the etrailer ball mount kit # 989900. It comes with 2 ball mounts, 2 balls, a hitch pin with clip and a storage bag. For trailer wiring you can use T-connector,...
view full answer... - Recommended Trailer Hitch for Towing with a 2015 Ford FlexI recommend going with the Draw-Tite # 75679. This will give you a Class III trailer hitch with a 2" receiver for your 2015 Ford Flex. I like this trailer hitch because it has been rated as a 4 out of 10 for installation difficulty and it will fit whether you have dual exhaust or not. You will also need wiring like the T-One # 118472 which gives you the basic lighting functions for your trailer and a ball mount/hitch ball/pin & clip combination like the popular # C45036. This comes with...
view full answer... - Trailer Hitch for a 2012 Ford Flex Towing a 3,000 Pound Boat TrailerDraw-Tite trailer hitch # 75679 is rated for up to 4,000 pounds gross trailer weight and 400 pounds tongue weight so it can easily handle a 3,000 pound boat with 300 pounds tongue weight. You will want to check the owners manual for your 2012 Ford Flex to make sure it also has the capacity needed. If your Flex did not come with a factory installed trailer connector you can add one using wiring harness # 118472. It just plugs in line with the vehicle tail light wiring. I have included links...
view full answer... - Trailer Hitch Recommendation for a 2012 Lincoln MKTThe Draw-Tite trailer hitch # 75679, will indeed fit the 2012 Lincoln MKT. The fact that the vehicle has left and right side dual exhaust is covered in the instructions which I have linked for you to view. The hitch cross tubing and receiver will be visible below the rear fascia of the vehicle once installed. I have also included a link to a video that shows a typical installation for you. I also recommend the etrailer ball mount kit, # 989900, which comes with 2 ball mounts, 2 balls,...
view full answer... - What is Sway Control and Can it Be Used with 2011 Ford FlexTrailer sway control is a type of device designed to either prevent or reduce trailer sway when on the highway. A very common style is the frictions way control like the # 83660 which attaches to the tow vehicle and the trailer and uses friction between the two when the trailer turns to try and reduce sway caused by high winds or passing semi trucks. See attached review video. Sway control is not included with the Draw Tite part # 75679 but it can be used with it like the # 83660. Hitch...
view full answer... - Trailer Hitch and Wiring for a 2012 Ford Flex with EcoboostFor Draw-Tite trailer hitch # 75679 it will fit a 2012 Ford Flex with or without the Ecoboost engine. The installation instructions, which I have linked for you, are the same for either configuration. Since the Ecoboost models have dual exhaust, the sections in the instructions that deal with lowering the exhaust will apply to both sides. I also recommend the etrailer ball mount kit # 989900. It comes with 2 ball mounts, 2 balls, a hitch pin with clip, and a storage bag. For wiring use...
view full answer... - Swing-Away Hitch Cargo Carrier for 2014 Ford Flex That Will Clear Heat from Dual ExhaustThe two 2-inch hitches we offer that fit your 2014 Ford Flex with dual exhaust are Draw-Tite # 75679 and Curt # C13110. Once installed these two hitches will be fairly close to the rear of the vehicle; the hitch pin holes will be about 3-inches forward of the rear edge of the bumper cover. As most hitches go, this is a relatively large amount of clearance, meaning that a hitch cargo carrier will be fairly far from the two exhaust tips. The hitch receiver opening will be pretty much at the...
view full answer...
- Trailer Hitch Receiver With The Most Ground Clearance For 2009 Ford FlexThanks for the picture! The Draw-Tite Trailer Hitch Receiver # 75679 you were looking at will measure 12-3/4" from the ground to the top inside edge of the receiver when installed on your 2009 Ford Flex, so it will give you a little more ground clearance as your current hitch measures 12" based on the picture you provided. The # 13551 you mentioned is only confirmed to fit the 2009-2019 Ford Flex without dual exhaust, so it is not universal. I included a video of the # 75679 being installed...
view full answer...
- Recommended Trailer Hitch Receiver For 2019 Ford FlexI recommend the Draw-Tite Max-Frame Trailer Hitch Receiver # 75679 for your 2019 Ford Flex. This Class III receiver is capable of a maximum 400lbs of tongue weight and 4,000 lbs towing capacity. Be sure to check with your owners manual on what you vehicle maximums are and use the lesser of the 2 figures. The Curt T-Connector Vehicle Wiring Harness # C56343 will give you a 4-way flat trailer connector for when you need to connect to a small trailer, and it will also allow you to use Auxiliary...
view full answer... - Does The Draw-Tite Trailer Hitch for the 2011 Ford Flex Install the Same as on a 2010 Ford FlexYes, the Draw-Tite trailer hitch, # 75679, will install the same on your 2011 model Ford Flex as it did on the 2010 Flex in our video. I attached links to the video and the installation instructions for you. Some items you may need to complete your towing setup are listed below. 4-Way trailer wiring, # 118472 etrailer.com Ball Mount Kit, # 989900
view full answer... - Recommended Hitch and Wiring for 2009 Ford FlexTypically the components that are included to make a vehicle considered a tow package are a trailer hitch and wiring. We do have exactly what you will need to outfit your 2009 Ford Flex for just that. First lets start with the hitch, I recommend the 2 inch Draw-Tite Hitch # 75679, because it will fit whether you have a the dual exhaust or not and will not require you to use a stabilization strap like many Curt hitches do for non-trailer loads. I have linked an installation video of...
view full answer... - Hitch Installation Specs for the Draw Tite Hitch part # 75679 on a 2012 Ford FlexThe torque specs for the Draw Tite Hitch part # 75679 that you referenced are listed in the installation instructions that I attached to the right. For liability reason I cannot list them here since they are subject to change. I attached an install video for this hitch for you to check out also. For trailer wiring you would want the Tow Ready wiring harness part # 118472. For ball mounts I recommend the etrailer Ball Mount Kit # 989900. It comes with 2 ball mounts, 2 balls, a hitch pin...
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Expert Research:
Jackie C
Expert Research:
Mike L
Expert Research:
Robert G
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Jameson C
Expert Research:
Adam R
Video Edited:
Zack K
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Patrick B
Video Edited:
Dustin K
Video Edited:
Chris R
Written by:
Lindsey S
Test Fit:
Nicholas E
Test Fit:
Shane T
Test Fit:
Jared G
Test Fit:
Conner L
Test Fit:
David F
Test Fit:
Ryan G
Updated by:
Laura H
Updated by:
Leah S
Updated by:
Wilson B
Updated by:
Alexander C
Updated by:
Amanda M
Updated by:
Isabelle B
Video by:
Jonathan Y
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Ken
5/11/2020
At this point it look and feel like a factory installed unit.