For vehicles that require the battery be disconnected when flat towing but also use supplemental braking that needs a power source like the Blue Ox Patriot # BLU37TR you'd need to wire the outlet kit part # RM-9332 directly to the vehicle battery. This gives you the power source from the battery that is active while the vehicle isn't connected to anything. view full answer...
This is most likely due to the pigtail you currently have. The 016118075076 (or # 22292 ) harness is designed to fit a Lincoln Navigator from 2015 to 2021. The port will look the same, but it will end up being pinned differently.
For your 2014, you will need the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers # 3034-P. This will be pinned for your year Navigator and will get you all squared away. view full answer...
You won't need any type of converter when installing the Curt Universal Tail Light Wiring Kit # C63CR on your 2013 Lincoln MKS. However there is a distinct process that you'll want to follow to determine how this system will be installed that tells you whether you've got a 2 or 3 wire system and how to install the unit. It sounds like you might have installed this in a 3 wire configuration but there is no power on the turn signals.
I would start by checking any and all ground wires that... view full answer...
Yes! I am happy to confirm that the Yakima FullBack 2 # Y02634 fit both your 2019 Lincoln Nautilus and your 2019 Ford Escape.
As far as the ease of mounting and removing, the 4-strap mounting design of the FullBack 2 is easier than many other 2-bike racks we carry. You simply attach the straps into the edges of your trunk lid. This process takes about 5 minutes. Although, it usually takes a bit longer the first time because you need to adjust the straps right out of the box. Also, if you... view full answer...
The Inno Aero roof rack you'd looked at consists of the following parts:
• 45 Inch Inno Aero Crossbars, part # INXB115-2
• Inno Flush Roof Rack Feet, part # INXS200
• Inno Custom Fit Clamp Kit, part # INK759
The rack attaches to the roof via clamps that grab the top of the door jambs. This arrangement works extremely well and allows the rack to have a pretty generous 165 lb capacity. The bottom of the feet and the clamps are rubber coated so they won't scratch up the vehicle.
The install... view full answer...
The Curt Trailer Hitch Receiver part # C13194 comes with all of the hardware you will need for installation including the fish wires you mentioned. I have linked an installation video for you to check out that will show you the step by step process including the use of the fish wires. Check it out. view full answer...
Hey Charles, what you will need is the Universal Installation Kit # ETBC7. This kit includes all of the components you will need to upgrade the 4-way on your 2010 Lincoln Navigator to a 7-way. It will have the wire to run 12v power to the 7-way which you can use to run a charge the trailers battery. view full answer...
Yes, the Curt Hitch part # 13594 that you referenced has been confirmed to fit your 2015 Chevy Captiva Sport so I would recommend it for you.
If you plan on doing some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip, and a storage bag.
If the ball mount kit does not have the right rise... view full answer...
Base plate kit installs like the # BX2680 typically aren't overly difficult but they take a few hours to do. Our installers will tell us to set aside an afternoon/evening to pull off the install.
For more info on the install check out the install video as well as instructions link I attached as well. view full answer...
Nope, head tilt position 4 or 5 will not make it more difficult to couple the Curt TruTrack Weight Distribution System # C17500 to your hitch ball. view full answer...
The factory hitch of a 2004 Lincoln Aviator is built into the rear portion of the frame/bumper beam. It's not something that could easily be removed and would be necessary to install one of our hitches that is designed for the vehicle like the Draw Tite # 75132.
I'd be willing to bet the vehicle has a hitch but is covered by a bumper cover. view full answer...
For a wireless camera to install at the back of your boat I would recommend the Swift Hitch part # 04928. Of the wireless cameras we offer this one seems to have the best range without interference issues like some of the others do. This also has night vision which means it'll help even at night. view full answer...
The largest size tire you can use on your Sea Lion trailer is going to depend on how much clearance you have which I will not be able to answer for you. In order to determine this you will need to measure for yourself. It looks like you will be able to install a 12" wheel/tire no problem so long as you also replace the fender.
I recommend the Kenda KR25 ST145R12 Radial Trailer Tire with 12" Aluminum Wheel part # AM31208. This tire measures 21.3" diameter x 5.7" wide so you will need to... view full answer...
For your 2016 Lincoln MKX the Thule Aeroblade Edge Roof Rack part # TH7602B-TH7603B and # THKIT4047 is the best option for your vehicle and for with your Yakima paddleboard carrier.
Thule crossbars are perfectly compatible with Yakima roof rack accessories like your paddleboard carrier and since this rack also gives you the quietest option for your MKX it's your best solution.
I attached a picture that shows this rack installed on a 2016 MKX just like yours as well as an install video.... view full answer...
I have platform-style bike rack options for your 2011 Lincoln MKT, though not with Thule. Your vehicle needs more space to clear the bumper than the Thule racks can offer, so I recommend the Kuat Sherpa, # SH22P, a high-quality rack which offers 7-1/2 inches of space from the center of the hitch pin hole to the closest part of the carrier when folded (your vehicle requires at least 6 inches to clear the bumper). The Yakima HoldUp, # Y02443, is another quality option, measuring 7 inches... view full answer...
What you need for your 2011 Lincoln Navigator to install the Curt Spectrum Trailer Brake Controller # C51170 is going to depend on if you have the factory 4-flat or factory 7-way as part of the tow package. Both options will also require the Curt Custom Wiring Adapter for Trailer Brake Controllers # C51322
If you only have the factory 4-flat, you can install the Spectrum by adding the Adapter 4-Pole to 7-Pole # 37185.
If your 2011 Navigator has a 7-way already, you do not need to add... view full answer...
I have linked the installation instructions for the Draw-Tite Sportframe Trailer Hitch Receiver # 24897 below that lists the Torque Specs for the installation hardware.
You will need a torque wrench that is capable of at least 55ft-lbs like the # PT87ZR to properly torque the hardware. view full answer...
The Roadmaster Even Brake # RM-9400 that you referenced is compatible with a 2013 Lincoln MKZ. It fits the hybrid and non-hybrid models. Due to the universal design of this system it basically fits all vehicles. view full answer...
The only type of replacement step options available for a 2005 Lincoln Navigator are the nerf bar type, the Westin Signature Series Round Nerf Bars part # 25-0930 are the correct fit and they come with the custom mounting brackets required for installation. view full answer...
Definitely go with snow tire chains over cables for regular use in the snow on your 2019 Lincoln Navigator's 285/45R22 tires. Cables are essentially emergency, one-time use only, and pretty much something people throw in their car if they are required to have them around. Cables do not allow you to drive faster either so I highly recommend chains, and the best option for your Navigator are indeed from Titan:
- Titan Chain Alloy Snow Tire Chains # TC2327
The # TC2327 are a diamond-pattern... view full answer...
Go To Results