Since your 2015 Lincoln MKC didn't come with the factory tow package you need the Tekonsha T-One # 118284 for the basic trailer light functions. Then typically when a boat trailer has a 5-Way wiring harness that means it has a hydraulic actuator with an electric lockout. If this is the case then all you need to complete your wiring is the Tow Ready # 20036. This plugs into your 4-Way and then includes an extra wire that you connect to your reverse wire.
If you still wanted to install a... view full answer...
It's not uncommon for vehicles with a shorter wheelbase to experience sway when towing the same trailer (from your F-150 to your 2020 Lincoln Aviator).
From what I could find it looks like your 1958 22 ft Airstream should weight about 3,000 lbs so I recommend using the Reese Strait-Line Weight Distribution System w/ Sway Control # RP66082. The weight distribution side of things will help keep everything level and improve your towing experience while the dual-cam anti-sway it one of the... view full answer...
When we installed the Curt Class III hitch, part # C13194 on a Lincoln MKC, we found that the inside top edge of the receiver sat 12-1/2 inches above the ground. The the bottom edge of your boat trailer sits at 16 inches with the trailer level, you'll want to use a ball mount with a rise to raise the trailer ball by about 4 inches. That way, once the trailer is hitches up, the rear of the vehicle will squat a bit which will place the trailer very close to level.
I'd recommend the Curt... view full answer...
When it comes to using a weight distribution system on your 2010 Lincoln Navigator The Fastway e2 Weight Distribution w/ 2-Point Sway Control - Trunnion - 8,000 pounds GTW, 800 pounds TW # FA92-00-0800 will be the system that you will need. Using the Fastway e2 will not cause the Navigator to pop up if you're under the towing capacity limitations for your vehicle, even though you have the heavy duty tow package doesn't mean the vehicle can actually handle it.
When using a weight distribution... view full answer...
You could make an adapter to go from the connector on your Aviator, if it is a factory 7-Way connector, to the 5 wires on your trailer. I would use the Pollak Black Plastic, 7-Pole, RV-Style Trailer Connector, item # PK12706, along with the 5-Flat Vehicle End 5-foot Wiring Harness, item # HM37908, to build an adapter. Once the adapter is built and wired, I would use the 5-Flat Trailer End 48-inch Harness, item # 20017, to splice to the trailer wiring.
If you have a 4-Way connector at the... view full answer...
If you don't have hand holders for an inside fishing rod holder, like the Inno INIF8, then I recommend installing a Malone roof rack, part # MPG202 for square or part # MPG215 for aero, and then using a roof mount holder like the Rhino-Rack Multipurpose Holder # RMPH or Fishing Rod Carrier # RR572. view full answer...
I have a solution for you, but I don't recommend using any adapter that extends the hitch away from the vehicle similarly to the Curt Trailer Hitch Receiver Adapter - 2" (Class III) to 1-1/4" - 4" Long # C45770 since those will reduce the tongue weight capacity of your hitch by 50%.
Instead, I recommend using the Hitch Reducer 2" to 1-1/4" Trailer Hitch Receiver # HT02, which won't reduce the tongue weight capacity but will still reduce the 2" receiver down to a 1-1/4". This will allow... view full answer...
I have a solution for you but I was able to find out that the 2018 Lincoln Navigator is not pre-wired for any type of brake controller installation, so your best bet is going to be to use a wireless brake controller like the Curt Echo # C51180. This unit plugs into your 7 way controller and is controlled wirelessly by your Bluetooth enabled smart phone (requires iOS 8.0 or Android 4.4- or newer). This is a proportional brake controller so it will provide you with responsive braking in by... view full answer...
From what I show, a brake controller would have to be hardwired into a 2005 Lincoln Aviator. If the vehicle does not have a 4-Way trailer connector, you will need to start by adding one, # 18252. I have included a video link showing a typical installation for you.
You will then need a 4 and 7 Way installation kit # ETBC7. This will provide a 7-Way at the back of the vehicle and all of the wiring needed to install the brake controller. I have included some links that explain the ETBC7 installation.
For... view full answer...
The Blue Ox base plate kit that you will need to use is part # BX2673 for your 2017 Lincoln MKX EcoBoost with Adaptive Cruise Control. If you don't already have a tow bar and safety cables then I highly recommend the Blue Ox Alpha Tow Bar # BX7380which comes with safety cables rated for 6,500 lbs.
For a supplemental braking system the Air Force One # SM99243 is the best for you since your 2013 Tiffin Phaeton has air brakes. You will also need to use the Relay # RM-88400 unless you plan... view full answer...
To use a Blue Ox towbar with your Roadmaster # 4408-1 XL style base plate, you'll want to use the # RM-032 adapter. I've linked you to a product demonstration video shwoing how the adapter works. view full answer...
Yes, the Curt Trailer Hitch Receiver # 13707 is a confirmed fit for both a 2003 Mercury Grand Marquis and a 2007 Lincoln Town Car.
The replacement hardware can be found with part # RHK. You will simply click on the linked part and then select "Curt" as the manufacturer in the drop down menu. You will then type in "13707" for the hitch item number and we will send you the correct replacement hardware needed to install this hitch on your Lincoln.
Keep in mind that a trailer hitch receiver... view full answer...
When it comes to installing the tow bar wiring on your 2017 Lincoln MKZ The Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Wire to 6-Wire Straight Cord # RM-152-98146-7 is the correct kit you would need. This kit is for a RV with a 7 round adapter and will make the Lincoln MKZ mirror the turn, stop and tail lights of the motor home.
If your motorhome has a 4 flat connector you would need The Roadmaster Universal Hy-Power Diode Wiring Kit # RM-154.
The # C56258 is used... view full answer...
The Hopkins Custom Tail Light Wiring Kit for Towed Vehicles # HM56002 is a confirmed fit on your 2013 Lincoln MKX and when using this harness to flat tow the car the integrated diodes prevent feedback from RV for safe operation. view full answer...
I can definitely help you out with this. To tow your 2020 Lincoln Nautilus behind your 2021 Allegro Bus you will need at least 5 main parts (Base plate kit, tow bar, safety cables, tow bar wiring and supplemental braking system). I have listed these parts out below, along with a brief description of their purpose and a recommendation.
Base Plate Kit: This is a custom fit part that allows for proper attachment points on your Nautilus to use a tow bar. I recommend the Roadmaster Direct-Connect... view full answer...
I have linked the installation instructions for the Draw-Tite Sportframe Trailer Hitch Receiver # 24897 below that lists the Torque Specs for the installation hardware.
You will need a torque wrench that is capable of at least 55ft-lbs like the # PT87ZR to properly torque the hardware. view full answer...
We have the perfect trailer hitch for your 2023 Lincoln Aviator!
The etrailer Trailer Hitch Receiver # e29YR has a bolt on installation with no welding required. It has a matte black powder coated finish that is over a protective base coat that offers superior rust resistance.
The trailer hitch has a maximum gross trailer weight up to 6,000 pounds and has a maximum tongue weight up to 600 pounds. I would recommend checking your vehicle's manual to find the proper towing capacity.
I... view full answer...
The Thule Evo Flush Rail Feet # TH710601 are compatible with the flush mounted rails on your 2020 Lincoln Aviator. The correct fit kit would be part # TH66RV.
For crossbars you will need the Thule WingBar Evo Crossbars # TH711420 view full answer...
The correct wiring adapter to install the Prodigy P3, part # 90195, your 2013 Lincoln Navigator is # 3034-P.
I apologize the original answer you saw was incorrect. I've corrected it now. Thanks for pointing it out. view full answer...
In order to flat tow your 2011 Lincoln MKX you will need the following parts: base plates, tow bar, safety cables, lights, supplemental braking and rise/drop adapter; I have listed these parts below for you to have a look at.
Base Plates- Blue Ox Base Plates w/ Removable Arms # BX2625
Tow Bar- Blue Ox Alpha 2 # BX7380 (comes with safety cables integrated)
Supplemental Braking - Blue Ox Patriot Portable Braking System # BLU37TR
Lights- Heavy Duty Magnetic Tow Light Set # 337TL257M64
I... view full answer...
Go To Results