Yes, the Camco Vinyl Tire Covers # CAM45332 that you referenced will fit your tire size of 205/75-14. These actually can fit tire diameters up to 29 inches so yours being 26.1 inches in diameter would not be an issue at all. view full answer...
The Yakima OnRamp E-Bike Rack # Y36FR will work with your 2016 Lincoln MKX. All you need is a hitch receiver like this # C78KR.
I've included a review video of the OnRamp that AJ put together and he does a great job of going over all the features. Also, Conor made an installation video on a 2019 Ford Edge which should give you an idea if it is something you would want to do it yourself! Be sure to check those out. view full answer...
Thanks for the info, Joe!
The correct key you're needing is the Replacement Key for Thule Racks and Carriers - N012 # THKEYN012.
Thule helped make the SportRack carriers which is why this matches what you have. view full answer...
The maximum towing capacity for Curt Class III Trailer Hitch, # C13067, is 4,000 lbs. The maximum tongue weight capacity is 400 lbs. Keep in mind, these are the maximum capacities for the hitch. It is important for you to check your owners manual to verify the actual towing capacities of your vehicle because they could be different.
If you plan on doing some towing, then you will also want a wiring harness, # C56329, and a ball mount, hitch ball and a pin and clip. We offer the etrailer.com... view full answer...
If it's an A-frame trailer you could use the # CC-275 as a way to carry your bike rack. This will hold the bike rack on the trailer frame which will free up your hitch to allow you to tow the trailer.
The Swagman XTC2, part # S64670 is one of the most popular racks because it's so easy to use, and because the rack has an angled shank that would raise the bike rack up by three inches providing additional ground clearance. Because of that, this is the rack I'd recommend for you. The rack... view full answer...
Baseplate installs typically take the better part of a day to complete as you're typically pulling the entire fascia/bumper off and most of the time doing quite a bit of drilling or trimming to get a baseplate like the # BX2673 installed. We typically schedule a full day for baseplates because things don't always want to run smoothly.
Your motorhome should have a 7-way on the back of it, if not then you'll need part # ETBC7 and some additional wire # 10-2-1 to run up to the front of the... view full answer...
In order to flat tow a 2014 Lincoln MKX you will need a base plate kit, tow bar, supplemental braking system, safety cables, a flat-tow wiring harness, and a few other smaller items. Although we do not sell a complete all inclusive kit, I have attached for you below a list of all the parts that you will need.
Roadmaster Base Plate Kit part # 4408-1 (Without Adaptive Cruise Control) or part # 4408-5 (With Adaptive Cruise Control)
Roadmaster Nighthawk All Terrain Non-Binding Tow Bar part... view full answer...
The Draw Tite hitch part # 75234 is a confirmed fit for your 2017 Lincoln MKX. The hands-free liftgate will still function. The only area affected is right by the hitches receiver, it should function properly as long as you wave your foot not directly below the hitch receiver. So if you wave your foot to either side of the hitch tube it will still work just fine. view full answer...
Lets start with the trailer connector. I can tell you what the functions are so it will be easy to connect to the lights once we determine their functions.
On a 4-Way, you will have one pin that is covered. That is the ground. Right next to it is the running light pin. Then the left turn/brake light pin. And the last pin is right turn and brake lights.
Now, on the lights, since the common wire on both sides is red, I am inclined to believe this is the running light wire. What you will... view full answer...
All you need for your 2018 Lincoln MKX is the Yakima JetStream Crossbars # Y00425, RidgeLine Towers # Y00145 and RidgeClip Fit Kit # Y89FR. This is an aluminum colored crossbar and will fit your Lincoln with siderails. view full answer...
To add a 4-Way and 7-Way connector for a 2014 Lincoln MKX you will need two separate wiring harnesses because they don't make just one that will add a 7-way connector.
The first harness you will need is the T-Connector Vehicle Wiring Harness item # C56121. This custom fit harness plugs in behind the driver side tail lights. It will provide you with a 4-way connector.
The second harness you will need is the Universal Installation Kit for Trailer Brake Controller item # ETBC7. The kit... view full answer...
Actually, the Yakima JetStream roof rack has been confirmed to fit your 2015 Lincoln MKX with the panoramic roof. You may not be able to open the roof depending on how much clearance there is between it and the bottom of the crossbars or the mounting hardware of anything on the crossbars. So use caution once you have the rack on our Lincoln.
You need the 50 inch JetSreams # Y00425 in black. Along with the BaseLine towers, part # Y28TR, and BaseClips, part # Y06180. view full answer...
I spoke with my contact at Swagman and the straps that come with the RV Bumper 2 Bike Rack for Around the Spare Tire # S80501 that you referenced measure 5 feet. view full answer...
For the 1-1/4 inch trailer hitches we carry for the 2010 Lincoln MKX, the recommended ball mount is Draw-Tite Ball Mount, # 36051. This ball mount has a 5/8 inch rise or a 1-1/4 inch drop. It is rated for 3,500 pounds gross trailer weight and 300 pounds tongue weight capacity.
This ball mount accepts a ball with a 3/4 inch diameter shank like ball # 19258 (2 inch diameter) or ball # 19256 (1-7/8 inch diameter). I have also included an FAQ article on choosing the correct ball mount below. view full answer...
For your 2017 Lincoln MKX the hitch part # 75234 is a confirmed fit and will work well. Since hitch installs are pretty basic for qualified mechanics your best option is to find a local mechanic with a decent reputation and let them do it.
I attached an install video for you to check out or for you to share with a mechanic. view full answer...
Installation time for the Roadmaster EZ4 Base Plate # RM-524447-4 on the 2018 Lincoln MKX will be approximately 4 hours for an experienced installer and naturally longer for a first-time installer.
This kit is recommended by Roadmaster for professional installation but I linked a video and the written instructions to help you see the whole process so you can determine for yourself a realistic install time.
Installation time for the wiring options for the MKX will vary depending on the... view full answer...
There is one high-quality roof rack that will work on your 2016 Lincoln MKX with a naked roof and panoramic sunroof from Inno, which consists of:
- Inno Aero Crossbars # INXB138-2
- Inno Through Feet for Aero Crossbars # INXS250
- Custom Fit Kit for Inno # INK676
This roof rack uses aero crossbars that measure 3-1/8" wide x 1-1/8" tall which are the same dimensions as Thule bars such as the WingBar Evo so your Thule cargo box will fit. The fit kit does have pads to protect your the surface... view full answer...
I checked with Yakima and the strap you need is # 8860050 for the Yakima SUPDawg Stand-Up Paddleboard Carrier # Y04075 that you have. This is the strap and hook that from from the front/rear of the vehicle to the boards you are carrying with the carrier. view full answer...
Actually, in our fit guide we list the # 524447-4 base plates as being a fit for the 2016 Lincoln MKX regardless of whether it has the EcoBoost engine or the Adaptive Cruise Control with no mention of the air shutters. The base plate is indeed a fit for vehicles with the Active Air Shutters, and I'll have that information clarified.
According to my research, your 2016 Lincoln MKX is capable of being flat towed, but exceeding 65 mph is not recommended. There are very specific flat towing... view full answer...
It sounds like you need a flat-towing wiring harness to allow your motorhome to control the lights on the towed MKX. There are several options for flat-towing lighting and these vary in cost, complexity of installation and in how permanent that installation is.
With a brand new vehicle like your MKX you can consider a set of magnetic lights like # TLL21RK, which uses a 4-pole flat type connector. This kind of lighting kit means you do not have to cut into the brand new car's wiring or... view full answer...
Go To Results