bing tracking image
  1. Wheel Chocks
  2. Tow-Rax
  3. Motorcycle
  4. Steel
  5. Wheel Chock
  6. Single Chock
Tow-Rax Removable Wheel Chock w/ Wood Screws - 6-1/2" Wide Tires - Tubular Steel - Chrome

Tow-Rax Removable Wheel Chock w/ Wood Screws - 6-1/2" Wide Tires - Tubular Steel - Chrome

Item # TWSPWC
Retail:$117.84
Our Price: $79.92
You Save: 32%
Wheel Chocks
Shipping Weight: 5 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Need help with installation?
Locate installers near me
This sturdy steel chock attaches to your trailer's wood floor to help stabilize your bike. Keyhole slots make it easy to remove the wheel chock for storage. Chrome finish resists corrosion and provides a touch of class. Great Prices for the best wheel chocks from Tow-Rax. Tow-Rax Removable Wheel Chock w/ Wood Screws - 6-1/2" Wide Tires - Tubular Steel - Chrome part number TWSPWC can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (74)
  • Q & A (0)
  • Photos

Tow-Rax Wheel Chocks - TWSPWC

  • Motorcycle
  • Steel
  • Wheel Chock
  • Single Chock
  • Tow-Rax
  • Chrome

This sturdy steel chock attaches to your trailer's wood floor to help stabilize your bike. Keyhole slots make it easy to remove the wheel chock for storage. Chrome finish resists corrosion and provides a touch of class.


Features:

  • Wheel chock helps to stabilize your motorcycle, dirt bike or other small vehicle for transport
    • Works with tires up to 6-1/2" wide
  • Keyhole slots let you easily remove chock to free up space when not in use
  • Tubular steel construction creates a strong, durable system
  • Chrome finish is stylish and corrosion resistant
  • 3-Point mounting system - drill only 3 holes into your floor instead of 4
    • Mounting screws are included for installing on a wood floor
    • Mounting hardware for installing on metal floor (TWSPWFKM) sold separately
    • 3/8" Drill bit (sold separately) is required


Specs:

  • Dimensions: 11-11/16" long x 8-3/8" wide x 8-1/2" tall
  • Mounting hole dimensions:
    • Distance between rear holes: 5-1/2" on center
    • Distance between front hole and rear holes: 6-3/4" on center
  • Weight: 5 lbs
  • Limited 1-year warranty


Mounting hole dimensions

SPWC TowRax Chrome Tubular Motorcycle Wheel Chock with 3-Point Mounting System - Wood Screws





Customer Satisfaction Score:


Customer Reviews

Tow-Rax Removable Wheel Chock w/ Wood Screws - 6-1/2" Wide Tires - Tubular Steel - Chrome - TWSPWC

Average Customer Rating:  4.7 out of 5 stars   (74 Customer Reviews)

This sturdy steel chock attaches to your trailer's wood floor to help stabilize your bike. Keyhole slots make it easy to remove the wheel chock for storage. Chrome finish resists corrosion and provides a touch of class.

by:

Have three of these chicks for hauling motorcycles. They were easy to install on a wood floor trailer, tow and weather well.

Eric

5/13/2024

Still working out great!



by:

Used these wheel chocks for a year now and they work great. Made it across the country with these with no worries. These help me make long trips I can’t normally make anymore, due to health reasons. etrailer has helped me keep riding in places I can’t ride to. Made it so easy to trailer to far destinations. Highly recommend these along with great service and prices from etrailer.



by:

Excellent removable wheel chocks. Fairly easy to install. I have three of them on an open wood deck trailer and don't really remove them unless I have to. I use them for motorcycles and a large commercial zero-turn mower After a year of being outside, they are doing well and have weathered well! I would highly recommend these wheel chocks!



by:

This is a well made and sturdy product as advertised. I installed a pair of these wheel chocks in a 5th wheel toy hauler my wife and I recently purchased. Installation was easy. I liked the idea that the chocks were surface mounted and anchored directly to the floor so that I did not have to go through the under-belly of the trailer to anchor them. With that said, I was not sure how strong or stable these would be compared to Pingel wheel chocks I have used for years in a cargo trailer which had to be secured from underneath. These Tow-Rax chocks worked great. I was impressed by how strong and stable they were. We pulled our trailer and motorcycles through mountain passes and such and these chocks did the job flawlessly. I highly recommend them and I would buy them again. They are also good deal for the money. Other than that, I would like to thank the sales associate at etrailer who managed my purchase. I was kept notified of my order status and when it was shipped. I was made to feel as if etrailer was my neighborhood store down the street. Thank you!



by:

Excellent Product. Very prompt delivery- just arrived in time for hauling my KTM to the trails.

Great mounting design and simple to install on my Plywood floor.

Adds just enough stability with my straps.

Removable if you need a clear floor for other uses.

It’s my 3rd purchase from Trailer.com and every time is been a great experience- their videos are very thorough and to the point.

Can’t go wrong with this company.



by:

Great chock, easily installed and easy to remove and store when using trailer for other than motorcycle transport.



by:

Everything went as smooth as I could ask for the product was excellent and the installation great as the hardware worked as described. I can say enough about it when all was perfect!!!!!



by:

Has given me that extra feeling of security by being able to chock the front wheel when securing the bike on my trailer when I have to transport it and the capability of removing the chock easily when not needed. Highly recommend.

Rusty F.

12/27/2020

After using this check now for a year I still highly recommend it.



by:

Excellent product. Fits perfectly. Mounting system works great. Allows for removal easily and use of the trailer without hardware in the way causing an issue.

Big D.

7/6/2017

Still great. Been using these chocks for a year now and find it very handy to be able to remove the chock to roll a bike through to the front set - then the chocks right back in place. They are great.



by:

I bought a motorcycle trailer with one of these chocks but needed a second one. This was the exact duplicate the dealer installed at half the price.



by:

We have used our wheel chocks extensively for over a year, and they are just like new !! This is a sturdy, durable product that works great, we travel all over with motorcycles secured to these chocks-never had a problem.



by:

Good quality and meets expectations. I'm a bit suspect on the strength of the inserts going into chip board, which is the base of my EZ Hauler trailer. I'm not going to leave the safety of my Gold Wing to the pull out strength of these inserts into chip board. I'll have to jury rig something the bolts through underneath. I would like to have seen a mounting feature of greater strength and confidence.



by:

Product is what it is... However it still allowed my HD ultra classic to fall over in my toy hauler. I had to purchase a better one with a wheel lock built in to the wheel chock



by:

One of the benefits is the low profile design allows small wheels on scooters to fit securely without the front suspension hitting on the sides.



by:

Product was received in good condition and arrived in a short period after ordered. Installed in the bed of my trailer to secure my trike. Very satisfied with the quality and ease of installation, added benefit is the ability to remove and still have a flat floor to transport other items.



by:

Works great for both motorcycles, one dirt and one dual sport, installed inside cargo trailer.



by:

What else is there to say, works perfectly at holding the front tire in place and very easy to install. Putting some grease on the threads help the insert to go in a little easier.



by:

I made a mistake and ordered two of these but caught it right away. Phoned company and talked with Erika at etrailer she had me fixed up pronto. Just received package and am pleased to say just what I ordered and just what I need for my enclosed trailer that I use for more then my Harley transport. Awesome price, awesome service,couldn't be more pleased I'll search this company again for sure next time I need something they may have. I'll add pics later !



by:

This is strong and durable. I particularly like how the sleeves mount into the floor of the trailer and agree completely flush when the holder is not mounted



by:

Have not installed yet, but inspected upon arrival. The part seems to be well built and the finish is good. All attaching hardware was included in the shipping box. Which doesn't always occur when ordering on line, so that's a plus. Wide enough to fit around the front tires of all of my HD's. Took only a few days to arrive. Would recommend this product to others.



by:

product arrived on time and as described in your literature. price was right. great people to do business with. I will shop and suggest etrailer whenever I need parts



by:

Just received my order this morning of the Tow-Rax removable wheel chock.
It is exactly what I wanted and arrived in 2 days. One day earlier than the 3 day shipment I had ordered. I will not be installing it until spring, but wanted to order it now so I would not forget when I wanted to load my trike for travel to our camp in the spring. Thanks for the great service and prompt shipping.



by:

Good, basic wheel chock that I put in my toy hauler for my Harley. I liked that there are no "things" sticking up off the floor. I can un-screw the bolts and remove the chock with nothing to trip over and the threaded inserts are in the floor flush. Other wheel chocks have something sticking up like a bracket or something.



by:

Have two of these for dirt bikes.

Being
able to remove when not in use is fantastic. !




by:

Bought this to convert a flatbed trailer to haul dirt bikes. Product was everything it claimed to be and more! Highly recommend


25
74
Show More Reviews

See what our Experts say about this Tow-Rax Wheel Chocks

  • Can a Wheel Chock be Safely Mounted to and Used on a Plywood Floor
    Since the floor of the trailer is 1/2 inch thick plywood I recommend mounting the Tow-Rax wheel chock # TWSPWC through the floor and attaching it directly to the frame of the trailer. Or, as an alternative, you could attach a steel backing plate on the other side of the plywood floor and attach the chock to that. This will disperse the weight better. Once you have the chocks secured in one of the manners above and tie down the bikes it will be safe!
    view full answer...
  • Mounting Pinball Machines, E-Bikes, and Motorcycles in a 6 x 10 Enclosed Trailer
    The absolute best option would be to purchase a few sets of the CargoSmart X-Track Cargo Organizer Pro Bundle - Matte Black - Steel - 667 lbs - 5' Long # 3481788-P. Since it is most likely that you need more straps than tracks, I recommend more of the CargoSmart Ratchet Straps for E-Track or X-Track - 2" Wide x 12' Long - 1,000 lbs - Qty 2 # 3481935 depending on how secure you want your cargo. With this setup, you will have multiple mounting point locations on your trailer for safe transport....
    view full answer...
  • E-Track Spacing Recommendation for Securing a Harley To a Utility Trailer
    If you can get your tie down straps around 45 degrees or slightly higher when securing your Harley you would be setup pretty good. This number is more of a guideline than a rule though. Your best bet would be to mock up everything first and then make sure everything would fit properly. Put your bike in the trailer and then determine where they best place to locate the tracks would be. For D-rings to use with the E-track you would want the part # E59143, for backing plates for installing...
    view full answer...
  • What do You Recommend for Transporting My 88-Pound E-Bike on a 2018 Subaru Outback?
    If you are looking for a way to transport your 88-pound Ariel Rider Grizzly, we do not have a standard bike rack that can accommodate that weight. However, the best and easiest route is to use a dirt bike/moped carrier like the Ultra-Fab Dirt Bike Carrier for 2" Hitches - With Ramp # UF48-979033. This carrier comes with an inside track width of 5 inches wide, so it is plenty of room for your 4-inch wide tires. It also comes with an included ramp to make loading a piece of cake. For a locking...
    view full answer...
  • How to Determine if a Vespa Will Fit the Tow-Rax Removable Wheel Chock
    You would have to measure the distance from the ground to the bottom of the fenders or nearest potential obstruction on the Vespa to determine if chock # TWSPWC would work. The chock is 8-1/2 inches tall so the nearest obstruction would have to be higher than that from the ground. The chock works with tires up to 6-1/2 inches wide.
    view full answer...
  • Types of Motorcycle Wheel Chocks Available
    We do have wheel chock for motorcycles. The Flint Hill Goods Adjustable Wheel Chock # FHG37ZR will cradle the tire to help hold the bike in place while you attach the straps. If you have e-track in your trailer the CargoSmart Motorcycle Wheel Chock # 3481731 will snap into the track allowing you to easily remove it when not needed. The Tow-Rax Removable Wheel Chock w/ Wood Screws # TWSPWC is a more basic chock. It includes mounting screws for securing to wood floors used on several utility...
    view full answer...
  • Recommendation for a Removable Wheel Chock
    We have TowRax chock # TWSPWM, # TWSPWC, and # TWSPWC3BT. These chocks have a keyhole shape opening where the large end fits around a bolt head. When the bolt is tightened down on the skinny end it cannot be removed. When the hardware is loosened, the chock can be slid back to slip over the bolt head.
    view full answer...
  • How To Set-Up Demco Hijacker 5th Wheel Hitch When Using Rhino Box Pin Box
    What I think you are asking is, how to set-up the hitch with the Rhino Box as the narrow width of the pin box does not engage the capture plates on your Demco Hijacker 5th Wheel hitch. What you are missing is the Demco Hijacker Autoslide Locking Plate for Lippert Rhino Pin Boxes, # DM76FR. You need to use this locking plated when using a Lippert Rhino pin box with the Demco hitch.
    view full answer...
    Image 1 for
  • Recommended Wheel Chock for Suzuki Burgman Scooters
    The 4-3/4 inch wide front tires of your scooters would be perfectly compatible with the Tow-Rax # TWSPWC wheel chock. The chock includes hardware for mounting the chock to a wood floor, for a metal floor you'd need the # TWSPWFKM mounting hardware. If you don't already have them, you'll also need some ratchet straps to hold the scooters in place. Ones set of # 05605 straps per scooter would have plenty to capacity to keep the scooters locked into position.
    view full answer...
  • Recommended Removable Wheel Chock for 2016 Indian Vintage Motorcycle
    Great news! I found that the width of your 2016 Indian Vintage's front tire is just over 5 inches. This will work great with the removable Tow-Rax Wheel Chocks. Depending on what type of trailer floor you have we off the wood screws with chock in black # TWSPWM or chrome # TWSPWC. We also have a chrome with multi-surface mounting kit for metal or wood floors # TWSPWC3BT. Any of the Tow-Rax Wheel Chocks can use the metal floor hardware kit # TWSPWFKM sold separately. I have linked a...
    view full answer...
  • What is the Height of the Pivoting Bracket on MaxxTow Wheel Chock # MT70075
    The top edge of the pivoting bracket on the rear of the MaxxTow Wheel Chock (DISCONTINUED) will sit at most 10-inches above the surface of the unit's base. Its height varies slightly depending on the position of the bracket - in other words depending on where it is in its arc of rotation. This position varies, naturally, by tire diameter. Tires up to 5-1/2-inches wide will fit the chock and it includes mounting hardware. We also offer a chock from Tow-Rax, either # TWSPWM in black or...
    view full answer...
  • Recommended Wheel Chocks for Motorcycle Carrier
    I like the Tow-Rax Removable Wheel Chock, # TWSPWM in black and # TWSPWC in chrome. These can be screwed down to a wood floor of a trailer but also bolted down using the included hardware. These are 8-3/8" wide and from specs available to me online, the MotoGroup, ST3402 carrier has tracks 7-1/2" wide, this option will set slightly over the edge the carriers rails. That does not prevent this being used but I think setting within the rails may make a better fit. You would need to fabricate...
    view full answer...
    Image 1 for Image 2 for
  • Capture Plate Kit Needed For A Demco Hijacker And Pin Box Connection
    If you're referring to the locking plates that sit on the head of the Demco Hijacker and clamps onto the pin box to lock the head to it then you'll need part # DM6171 if you have a Trailair or Rota-Flex pin box or part # DM76FR if you have a Lippert Rhino pin box. Based on your description of the pin box you most likely have the Lippert Rhino so you'd want to go with the # DM76FR. If it is a Rhino then it will should have Rhino labeled on the sides and possibly also the front.
    view full answer...
  • Length of Mounting Hardware Supplied With MaxxTow Adjustable Wheel Chock
    The 4 carriage bolts (and related hardware) supplied with the MaxxTow Adjustable Wheel Chock (DISCONTINUED) MT70075 are intended to semi-permanently install this unit on the floor of a trailer. This wheel chock is not intended for routine removal and re-installation although it certainly could be taken off your trailer by removing the mounting hardware. The carriage bolts supplied are 3-inches long overall and include a washer, plastic spacer and nylock hex nut. If your trailer's floor...
    view full answer...
  • Motorcycle Wheel Chock in Toy Hauler Recommendation Where Under Trailer Access is Limited
    You could use the Tow-Rax Removable Wheel Chock # TWSPWC. You would not need to access the bottom of your trailer to install the install hardware. All you would need to do is drill hole for the anchors of the wheel chock and then you would be able to use the install bolts that thread into the anchors to secure the # TWSPWC. I attached a review video for this product for you to check out as well.
    view full answer...
  • Can the Tow-Rax Removable Wheel Chock be Installed on 5/8" Thick Plywood Floor
    I reached out to my contact at Tow-Rax who said that the Removable Wheel Chock # TWSPWC will work great for your application. Please note though that the wheel chock isn't load bearing so you will need to secure your motocross bikes with ratchet straps like part # IMF12636.
    view full answer...
  • Quick Release Motorcycle Wheel Chock Recommendation
    I have a solution for you, but the Wheel Chock MTMWC-01R is designed for permanent install. Instead you might be interested in the # TWSPWC which has slotted install holes so that you can slide the chock backwards and remove it easily when needed. I attached an install video for you to check out as well.
    view full answer...
  • Will Tow-Rax Mounting Hardware For Wheel Chock Withstand The Weight Of A Harley
    Yes, the mounting hardware part # TWSPWFKM is designed to mount Tow-Rax motorcycle chocks like part # TWSPWC onto a metal floor. The hardware is designed to withstand the weight of a motorcycle such as your Harley but I contacted Tow-Rax and they could not give me an official weight rating. I have attached a video for your reference.
    view full answer...
  • Can etrailer Cargo Carrier for RV Bumper Carry Dirt Bikes
    As far as weight capacity goes the 24x84 etrailer Cargo Carrier for RV Bumper # e96ZR has a 500 lb weight capacity so it can handle the bikes, but the thing you're going to have to check is the weight capacity of your bumper as it will likely be less than that. This carrier weighs in at 82 lbs and mounts directly to the bumper so you'll have to subtract the 82 lbs from the weight rating of your bumper so get an accurate rating. When it comes to securing your dirt bikes that is another...
    view full answer...
  • How to Install Tow-Rax Removable Wheel Chock w/ Wood Screws
    We don't currently (April 2022) have an installation video of the Tow-Rax Removable Wheel Chock w/ Wood Screws # TWSPWC but the installation process is pretty straightforward. You'll need to use a 3/8" drill bit and drill your holes in your floor either using the attached diagram as a guide or by holding the chock where you'd like it located and making marks through the mounting holes. I recommend going the second route. After the holes are drilled out you'll insert the anchors and secure...
    view full answer...
    Image 1 for
  • Wheel Chock Recommendation to Carry a Honda CRF250L in the Bed of a Truck
    Since you want to install a chock in the bed of your truck I recommend something that is easily removable so the bed is clear when you need it to be. For that I recommend using Tow-Rax Removable Wheel Chock # TWSPWC with mounting hardware kit # TWPH2770 for metal floors. I have linked a video review of this chock for you. This does mean you would have to drill through the truck bed. I also recommend using handlebar straps # 06303 in conjunction with ratchet straps such as # EM05729 when...
    view full answer...
  • Mounting Hardware for Tow-Rax Removable Wheel Chock
    Yes, you can use the mounting hardware kit # TWPH2770 with the Tow-Rax removable wheel chock, # TWSPWC. there is also a kit that comes with the chock and the hardware in one part number. It is # TWSPWC3BT. I have included a link to a video on the wheel chock for you.
    view full answer...
  • Would Tow-Rax Wheel Chocks # TWSPWC Work on a 2003 Harley Superglide
    Yes, the Tow-Rax Wheel Chocks # TWSPWC can work on tire widths that are up to 6-1/2 inches wide so yours that is right around 4 inches wide would work perfectly. I attached a review video for this chock for you to check out as well.
    view full answer...
  • Availability of Removable Wheel Chock for Dirt Bike
    The MaxxTow Adjustable Wheel Chock (DISCONTINUED) MT70075 is not removable but we do have motorcycle/dirt bike wheel chocks that are removable. The Tow-Rax Removable Wheel Chock # TWSPWM in Black or # TWSPWC in Chrome is removable and can accommodate tires that are up to 6-1/2" wide. These come with wood screws but if you have a metal floor then you can use the mounting hardware # TWSPWFKM. All of our adjustable wheel chocks are meant to be mounted permanently so if you are really wanting...
    view full answer...


< Previous
12



Do you have a question about this Wheel Chock?


Info for this part was:

Employee Lindsey S
Written by:
Lindsey S
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adele M
Updated by:
Adele M
Employee Wilson B
Updated by:
Wilson B
Employee Hannah L
Updated by:
Hannah L
Employee Dustin K
Video Edited:
Dustin K
Employee Cole B
Installed by:
Cole B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.