Correct Track Trailer Alignment and Lift Kit - Tandem Axle
(26 reviews)
Price: $434.72
In Stock
Correct Track Trailer Alignment and Lift Kit - Tandem Axle
Item # RR23QX
Our Price: $434.72
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (26)
- Q & A (0)
- Photos
RV Ride Control Trailer Suspension Parts - RR23QX
- Alignment and Lift Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Slipper Springs - 2 Inch
- Tandem Axle
- RV Ride Control
Prevent uneven wear on your RV tires and get a smoother, more stable ride by properly aligning your trailer's axles with this kit. This kit also lets you raise your trailer or RV so you can tow with a tall or lifted truck. No-drill installation.
Features:
- Corrects misaligned axles and lifts trailer for level towing
- Improves the life of your tires and creates a more stable ride
- Provides extra clearance so you can tow with your tall or lifted vehicle
- Lets you move axle up to 1/2" forward or 1/2" rearward for proper alignment
- Adjusts in 1/4" increments
- Raises trailer height by 1-1/4" or 2-1/4"
- Works with your existing leaf spring suspension system
- Brackets attach to hangers and supply new, lower mounting point for springs, which results in a taller ride height
- Alignment correction plates mount on either side of hangers to shift axle placement
- Includes 8 suspension plates, 16 alignment correction plates, and the hardware needed for installation
- No drilling required
- Made in the USA
Specs:
- Application: tandem-axle trailers and RVs with leaf spring suspensions
- Minimum required distance from I-beam to spring mounting hole on hanger: 2-5/8"
- Works with 3" wide x 3-3/4" tall hangers or 3" wide x 5" tall hangers and leaf springs up to 2" wide
- 90-Day warranty
Note: This does not work with MORryde CRE3000 equalizers.
Raise Your Trailer's Ride Height
Newer trucks are being built to ride higher. This means that your trailer may have to be raised to match. If the two aren't the same height at the connection point, the nose of your trailer or RV is going to ride too high. This will put too much weight on the rear of your trailer, which can result in poor handling and may eventually cause damage.
The Correct Track helps to solve this problem by lifting your trailer or RV 1-1/4" or 2-1/4", which provides a level towing setup for taller trucks. This added lift is also great for 5th-wheel trailers that might have trouble clearing tall pickup bed side rails.
Correct Misaligned Axles and Suspension
If the tires on your RV or trailer are wearing down quickly and prematurely, there's a good chance your axles are out of alignment. Driving with misaligned axles for long periods of time will shorten the life of your tires, reduce your gas mileage, and can make it difficult to steer your rig. Misaligned axles are often caused by an imbalance of weight, which can result from simply using the slide-out on your 5th wheel or having heavy appliances positioned on one side.
The Correct Track integrates into your trailer's suspension system and shifts the axles back into proper alignment. This kit allows you to adjust the axle alignment by 1/4" increments for a properly aligned suspension. It will correct your RV or trailer's alignment whether the axles need to be moved forward or backward.
9005934 Correct Track Trailer Alignment and 1-1/4" or 2-1/4" Lift Kit - Dual Axle
Installation Details
Customer Satisfaction Score:
91% were satisfied with this product
9% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
- Product did not meet expectations
Customer Reviews
Correct Track Trailer Alignment and Lift Kit - Tandem Axle - RR23QX
Average Customer Rating: 4.5 out of 5 stars (26 Customer Reviews)
Prevent uneven wear on your RV tires and get a smoother, more stable ride by properly aligning your trailer's axles with this kit. This kit also lets you raise your trailer or RV so you can tow with a tall or lifted truck. No-drill installation.by: Michael 03/26/2023
ETrailer is the best, but these things took TIME to figure out and get the axles aligned correctly! They did the job, lifting the RV up from the tires, and no more tires scraping the fender well on rough/bumpy roads. Have 2 people and a weekend available to get the kit installed correctly and aligned. Tires are running great with even wear. Thank you!
by: Daniel 05/08/2023
Well unfortunately I was not able to use this product it was not applicable to my trailer but all I know is the service and the help that I got from the people that e trailer was awesome I will not shop anywhere else if I don't need to
Daniel
5/9/2024
This product has helped us tremendously because of where we live. We are in mountainous country my driveway is hard to get into and this lift kit and the shock absorbing equalizer kit has made our trailer awesome. I would recommend it to everyone that has a bumper pull fifth wheel double or triple axle trailer you will love it
by: Eric05/07/2024
I have not installed the kit yet. The ordering process was easy and had plenty of information to make sure it was what I needed. The delivery date estimated during the order process was not accurate. The delivery date during the order process stated it to be the end of April. A few days after the date had passed I received a notification saying the order was being gathered and was expected to ship May 1. I received the order on May 6. This is not a huge issue, but with porch pirates these days, I make plans based on the stated date when ordering.
*** That being said, I have always had great great experience with eTrailer and is my go to for specialty and towing items. I am grateful for the detailed answers, videos and feedback they have for their customers. ***
by: Marcel08/16/2023
Horrible product.. from the beginning I had problems with delivery. they changed the delivery date 3 times. when the product arrived at my house I was not present because I expected to use it before. and when using the product I realized that if it would not work. I took it in for installation and the mechanic tried several ways to find a safe position for it but . when I finished the installation and the weight of the trailer came down, the parts with the holes rotated and that brought me a loss of 2 tires. because they started to rotate crooked! In the end, completely dissatisfied with the product. and in the end I never knew what day I received the product and then I never knew when I would have the opportunity to return the product since I felt harmed by the situation! when calling the store they said my refund window closed 2 days ago! very strange. So far completely unsatisfied
Jenny N.
8/31/2023
It is very unusual for the holes to rotate once this is installed. The manufacturer will be in contact to discuss this with you.
by: Thomas05/25/2022
I was having a problem with the brakes on one wheel failing (magnet/actuator), even after replacing the entire brake assembly. Upon measuring the axle alignment to the hitch ball I discovered that the axles were out of alignment. This kit corrected the problem and I am no longer having brake problems, or excessive tire wear. The trailer tracks much better. I am very satisfied with the product. Installation on two axles took about 3-4 hours.
Thomas
5/26/2023
After 2 years and 3300 miles, product is still working as expected. Completely solved the problem of tire wear, and excessive brake heating which lead to brake failure. Very happy with product.
by: David 02/10/2023
This kit made a huge difference in the height of my 5th wheel, it is now level and also gives my rear leveling jack some extra clearance. Pretty easy to install, the first one will take a little bit of time, but the reat will go faster. I also installed the heavy duty shackles and the Road Armor Equalizers. This all made my RV ride so much better!
by: Steve06/09/2023
Price was good and it was in stock.
I was confused why it took four days to ship when it was pulled the second day?
I ended up not being able to use it before I left on a six-week excursion.
Looking forward to getting back home and installing the product.
Jenny N.
6/12/2023
To be honest it looks like there was a hiccup when the order was sent to the warehouse. We did not have the kit on hand to ship right way and needed to wait til our next shipment came in which was just in a few days.
by: 06/11/2022
Used this to lift my fifth wheel 2 inches to reduce the nose height condition that is common with newer trucks. Not as easy as changing a tire though.
by: Benjamin 09/23/2022
Product is great. I just wish the instructions addressed tandem and triple axle applications. And some actual pictures of installation would be even better.
by: Francis04/08/2023
Do not purchase. These did not work at all and I had to remove them.
Jenny N.
4/11/2023
I am sorry to hear that this kit did not work out for you. I would like to know more about your experience with them and why it had to be removed.
by: Ronald 01/29/2023
I can’t review the product since installation is not scheduled until Friday. I have ordered fro eTrailer because I like their service, customer service and quick ship and deliver.
by: Mitchell 09/09/2021
Installing this kit on my travel trailer corrected my dual axle alignment problem which was wearing the inside of the left rear tire. It was easy to install, easy to understand, and very adjustable.
by: Nick 05/26/2023
Pretty simple to do with great benefits down the road.
by: Ryan12/03/2022
The product looks great and seems very well made. I have not been able to install on my own and I have tried with two different shops to install this system on my RV and they will not.
by: Donald 09/08/2022
I have not had a chance to install them yet, but they seem to be exactly what I need.
by: Bryan 04/27/2024
by: Jacques 09/23/2022
by: Greg 10/15/2023
by: Edwin 06/11/2023
by: Kevin 11/09/2023
by: Mark 07/07/2022
by: Don 10/27/2022
by: Mandelke05/24/2024
Built heavy duty ,my axles are in line for once,opted to lift my rig at 2 1/4 " it sits level with my 17 dodge 3500. I like this kit better than the lippert kit. This kit is like it was made for my suspension.
by: Michael05/01/2023
The kit came exactly as described and works as indicated. The shipping was stunningly fast but that might have just been my location. Either way everything was delivered quickly and as described.
I am not sure if I did not read the part about it not working with my Dexter equalizers but I had to modify the kit considerably to get it to fit with my system. The equalizers rubbed on the plates and the plate with the holes extended to far down and rubbed on the rubber of the equalizer. I made it work for me. So far so good.
by: Duane 12/04/2023
I needed to raise the height of my Keystone Laredo because my new truck was too high for a level pull. And it also allowed me to correct a tire wear that I had for years, due to an alignment issue.
25
26
Show More Reviews
See what our Experts say about this RV Ride Control Trailer Suspension Parts
- How To Lift a Pop-Up CamperI do have several options to lift a trailer but in order to proceed I would need to know what type of axle you have, leaf spring or torsion. Furthermore, if it is a leaf spring axle then are the leaf springs under or over the axle tube and if it is a torsion axle who makes it and what is the weight capacity. I have attached options for you below but I cannot recommend an exact kit without the above info. Leaf Spring Axle Options: Dexter Trailer Springs Over-Under Conversion Kit part #...
view full answer... - Will a Trailer Lose Height If Only the Center Lippert Correct Track Extension Is RemovedI do have an option for you but the reason your trailer dropped in overall height is because you removed the center hanger extension which is used in the Lippert Correct Track. In order to then go back to the ride height you had before the equalizers were replaced you would need to re-install the center hanger extension. That said, the Lippert Correct Track was actually discontinued by Lippert due to issues they were having with the system so now would be a good time to get rid of the problem...
view full answer... - Can Trailer Lift Kit for Tandem Axle Trailers Fit on Trailer with Axle Under SpringThe Tandem Axle Lift Kit # RR23QX that you referenced can be used on our setup that has the axle under the spring or vice versa. You'll get an additional lift of 2-1/4 inches which will help in your situation.
view full answer... - Is 4-1/2 Inches Of Bedside Clearance Enough Using a Sundown Gooseneck TrailerAlthough we do recommend 5-6" of clearance between the top of the bed rail on the truck and the bottom of the loft on your trailer, the 4-1/2" you have would properly be alright as well but you would need to be careful over steep grades. As you mentioned, the only option to help improve this would be to lift the trailer for which we have over/under kits like part # K71-385-00 or leaf spring hanger spacers like part # RR23QX. If you have issues with steep grades while in a straight line...
view full answer...
- Suspension Lift Kit For 2019 Eclipse Attitude 28SAG/Lippert 7k Tandem AxlesYes, the Tandem Axle Lift Kit # RR23QX that you referenced would be exactly what you would need for your 2019 Eclipse Attitude 28SAG. It will give your trailer a 2 inch lift which would eliminate the nose high situation you are in.
view full answer...
- Lift Kit for Montana RV Built on Lippert ChassisThe Tandem Axle Lift Kit # RR23QX does have the weight capacity needed for your Montana trailer and will give you 2-1/4 inches of lift like you are looking for. I attached a link to this page that has the install instructions for you to check out as well!
view full answer...
- Recommended Lift Kit for 2020 Forest River Stealth SA2816GThe best option we offer for a trailer lift kit that kits a 2020 Forest River Stealth SA2816G is the Correct Track Trailer Alignment and Lift Kit part # RR23QX which offers up to 2-1/4". This kit is a spacer that installs between the leaf springs and hangers. It not only provides a lift but also helps to realign axles.
view full answer... - Tandem Axle Lift Kit for 2014 Heartland Big Horn 37QBIt's pretty common to install an over-under kit on the axles to gain more height from the trailer. Some call this flipping the axle but since axles are bowed they can't actually rotate 180 degrees. Now that said we have lift kits like the # RR23QX which can give you a lift of up to 2-1/4 inches regardless of if the axles have been "flipped" or not so either way this will give you additional lift and won't be quite as involved as an over-under kit.
view full answer... - How to Adjust Towing Height of 2021 Grand design Momentum 351M 5th WheelYes, you can change the bolt hole locations used for your pin box. If you let us know what pin box you have installed we can make suggestions on replacement options. You can also install the Correct Track Trailer Alignment and Lift Kit, # RR23QX that raises trailer height by 1-1/4" or 2-1/4". Otherwise you will need to replace your hitch with one that has adjustment settings. The Pullrite has a height of 18.5" and is not adjustable.
view full answer... - What is the Difference Between the Correct Track Trailer Alignment Kit LC87120 and RR23QXThe difference between the Correct Track Trailer Alignment and Lift Kit # LC87120 and the Correct Track Trailer Alignment and Lift Kit # RR23QX is that the # LC87120 is for a single axle trailer and the # RR23QX is for a tandem axle trailer. Since your 2018 Jayco Eagle is a tandem axle trailer you would want to use the # RR23QX tandem axle kit. The # RR23QX will contain all the additional parts needed for a tandem axle application.
view full answer... - Recommended Trailer Alignment And Lift Kit For A 2014 Jayco EagleThe Correct Track Trailer Alignment and Lift Kit - Tandem Axle # RR23QX will work with tandem-axle trailers and RVs that have double-eye leaf spring suspension. The brackets in the kit will attach to the hangers and supply new, lower mounting points for springs, which will result in a taller ride height. The lift kit will not work with The MoRryde 3000 Stabilizers # MR34AR because it will not fit inside the raised portion of the equalizer.
view full answer...
- Trailer Brakes and Hubs For Adding Electric Trailer Brakes To a Dump Trailer With 2-3/8" Axle TubesIf you do indeed have a 3,500lb axle it will use a 10" Brake Kit # AKEBRK-35-SA per axle on your dump trailer. It is best to remove one of your hubs as this will allow you to measure for the bearings and grease seal and be able to verify you have a Brake Flange # 4-35 for the brake assemblies to mount. A 3,500lb axle will have a Grease Seal # 58846(ID 1.719" / OD 2.565"), Inner Bearing # L68149(ID 1.378") and Outer Bearing # L44649(ID 1.063"). If this matches what you have you will need...
view full answer... - Leveling a 2021 Forest River Artic Wolf When Connecting To a 2017 Ford F-250Your trailer leveling issue is common with the newer trucks continuing to get taller. The Correct Track Trailer Alignment and Lift Kit # RR23QX will allow you to raise your 2021 Forest River Arctic Wolf 287BH by either 1-1/4 or 2-1/4" to sit closer to level on your 2017 Ford F-250. I recommend using a Lippert Center Point # LC1565391 which will not only raise your suspension by 2" but will also greatly improve the ride quality of your trailer. The air bags help to absorb a lot of the...
view full answer... - Determining Correct 2 Lift For 2005 Keystone SprinterThere are a few options when it comes to lifting your 2005 Keystone Sprinter, and the correct option will come down to axles on your trailer. As long as your trailer has leaf spring suspension then a very easy way to get 2" of lift is adding the Correct Track Trailer Alignment and Lift Kit # RR23QX which bolts on to your hangers and works with all axles up to 8000lbs. If you have torsion axles just send me a picture of the axle tag located on the center of the axle and I would be happy...
view full answer... - Lift Kit for 2005 Keystone Sprinter to Gain More Fender to Tire ClearanceFor your 2005 Keystone Sprinter that has a tandem axle setup the best way to gain additional fender to tire clearance would be with a lift kit like the Correct Track Tandem Axle lift kit part # RR23QX which can give a lift of 1-1/4" or 2-1/4".
view full answer... - Can I Use the Tandem Axle Lift Kit with a MORryde Suspension EnhancementThe short answer to this question is that-yes- the parts included in the MORryde kit will work just fine. The Tandem Axle Lift Kit # RR23QX simply elongates the hangers on your trailer to provide the 2-1/4" of lift. Because it's only creating new hangers and the wet bolts in the kit you're installing only go on the shackles, they're going to work just fine. With that being said, you may need longer bolts when installing the equalizers onto the hangers, but these are not wet bolts.
view full answer... - Lift Kit for Trailer with Tandem 4,400 lb AxlesWe have a 2-1/4 inch lift kit with part # RR23QX that would work great on your trailer to give it an additional 2-1/4 inches of lift. You might be able to raise the pin box in the frame it attaches to on your trailer to lower the nose as well. As long as you can maintain at least 6 inches of clearance there while the trailer is level you'd be good. We don't like to recommend too much of a lift on the trailer as that raises the center of gravity considerably which could cause handling issues.
view full answer...
- Recommendation For Lifting Tandem Axle Trailer 2" If you are only looking to raise your tandem axle trailer 2" I recommend using the Correct Track Trailer Alignment and Lift Kit # RR23QX. This kit allows you to raise the trailer either 1-1/4" or 2-1/4". Using an Axle Flip Kit # K71-385-00 and mounting the axle below the leaf spring will raise your trailer the 3" of the tube and thickness of your leaf spring pack. So with your leaf spring pack being 2-1/2" thick a 5-1/2" lift is going to be a lot more than what you are looking for.
view full answer... - New Truck Sits Too High for 5th Wheel Trailer To Sit LevelThe issue you are having with the truck being to tall for the trailer causing it to sit nose high is very common with the latter model trucks nowadays. The best solution and really only feasible one would be to raise the trailer which can be done with an axle flip kit like part # K71-384-00 or part # K71-385-00. If the axle are already flipped then the best option is with the part # RR23QX.
view full answer... - Timbren Trailer Suspension Enhancement System that Could Fit Tandem Trailer with 3,500 lb AxlesFor a tandem axle trailer the Timbren suspension kit part # TTRA1702 would be a great option to provide additional suspension support. It can provide up to 1,000 lbs of additional support per axle. Since you have a tandem setup you'd need two of these. This will get rid of suspension sag when your trailer is loaded which would raise it up in a sense, but it is not actually a lift kit. For an actual lift kit you'd want the part # RR23QX instead.
view full answer... - Solution for Low Ground Clearance for 2022 Forest River Arctic Wolf 3990The best solution would be a lift kit that fits the tandem axle suspension of your 2022 Forest River Arctic Wolf 3990 with the Correct Track kit part # RR23QX. This will raise the suspension 2-1/4 inches which will provide you with enough additional ground clearance so that your RV stops bottoming out.
view full answer... - Determining if 2020 Ford F-350 with OEM Rail Kit Can Tow Ceder Creek 5th Wheel LevelHere's how to determine if you'll have enough clearance to tow your fifth wheel with your 2020 Ford F-350 that has the OEM rail kit. Measure from the truck bed floor down to the ground and then measure from the pin box plate (not the king pin the plate it attaches to) down to the ground when the trailer is level. This will tell you what hitch height you'd need for the trailer to sit level. The Companion hitch that fits your OEM rail kit part # BWRVK3305 that you referenced has an adjustable...
view full answer... - Lift Kit Recommendation for Trailer to Give 2-1/4 inch LiftWe have the Correct Track Lift Kit part # LC87120 that would work great for you. This is a single axle lift kit that would give you a lift of 2-1/4 inches.
view full answer... - How Much Clearance Should Be Between Bed Rails and 5th Wheel Trailer OverhangIn general you want 4 to 6 inches between the top of the truck's bed rails and overhang of the trailer. You also need to be sure that the trailer is also sitting level too. Sometimes in order to have the correct bed rail clearance the nose of the trailer ends up too high and you have to install a lift on the trailer like the part # RR23QX to allow for both.
view full answer...
Do you have a question about this Trailer Suspension Part?
Info for this part was:
Edited by:
Lindsey S
Installed by:
Jeff D
Installed by:
Bradley B
Expert Research:
Jameson C
Video by:
Dustin K
Video by:
Jonathan Y
Video by:
John S
Written by:
Mike S
Updated by:
Manda E
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Michael
3/27/2024
So, far even with chug holes and some rough interstate pavement, no more tire rubbing on the upper part of my self-made wheel wells. The Lift Kit has worked great!