To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.
Features:
Specs:
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
Average Customer Rating: 4.7 out of 5 stars (97 Customer Reviews)
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.Product was perfectly designed to be easy to install, robust, and as elegant as a hitch design can be. Even the instructions were easy to follow along with. The trickiest part is removing the rubber isolators for the mufflers from the hangers. You need to remove them to gain excess for a torque wrench to ensure you don't over-tighten the mounting bolts in the weldnuts on the chassis. Etrailer.com even caught an error in my order, corrected it, and confirmed that their catch was indeed in error.
Thank you Curt and etrailer!
I've attached a few scaled down photos of the hitch receiver installed. From the time I got the car on jackstands to the time I was lowering the car back down was 25 minutes. It was a very easy install, even by myself. I failed to take a photo of the actual bike rack and bikes so I attached a photo of the kids in the backseat. If you look carefully, you can see the 2 kid's bikes out the back window. My mountain bike sits low enough of the bike carrier that it wasn't visible. Thanks again for all your help getting this in time for the vacation.
Good looking Hitch. 39 pounds. Delivery good - showed up before scheduled. Installation tips: 1 You absolutely must drop dual exhaust (I use WD40 and Hand Clamps to push Rubber Exhaust Hangers apart) 2 Lift "big paddle end" of hitch into place first. 3 This is a two person job. Person one-to lift Hitch into place. Person two-thread bolts into uni-body of Flex (thanks to my beautiful wife).
The hitch I purchased is great. The instructions for installation were very clear. Unfortunately, having a car in the Northeast makes getting rusty bolts off the frame very difficult. But once I finally did the hitch went on very easy.
I was able to install this on my 2016 Ford flex limited without any help aside from a couple Jack stands. Fit great, looks great, couldn't be happier! I would recommend etrailer.com to a friend.
I was looking forward to installing the hitch this weekend but it never came. I received the little box of accessories but no hitch.
Jenny N.
6/12/2023
Oh my goodness! We will have the hitch shipped out for you. I will have our Customer Service team reach out.
It looks too good to install! I will let you know how it goes when I install it, probably this coming weekend.
Install was straight forward and easy. Customer service was top tier. Ordered the wrong hitch initially, the staff was knowledgeable of what I actually needed and was always quick with responding to my inquiries.
Great product and perfect service from etrailer. Couldn't have been a better experience!
Quick shipping and easy install!
Great Product fairly easy install. Curt's jig for making these must have slipped at some point because it should really be about 3/8 of an inch wider or they need to keep it from warping during there welding process. I can confirm as other reviews and installation videos have shown you will more than likely have to pry it over to get the second set of bolts in. It helps if you have two people to do this. If you do not you can hold the hitch up with a jack and use a large phillips screwdriver in one of the bolt holes to pry it over and start the first bolt. Once that is in place you will have to find another place to pry to get the next bolt in.
solid, heavy build, fit perfectly, instructions are clear. will use mainly for bike rack.
was able to install myself by backing the car onto ramps, lowering the mufflers onto vertical cinder blocks and then resting the hitch on top of the mufflers while getting first bolts threaded.
the only minor issue is that the box arrived really beat up via UPS; the hitch loose inside and actually poking out a hole. but the damn thing is indestructible so it hardly matters!
The hitch kit for my 2015 Ford Flex was a perfect fit and the wiring kit was an exact match. This was a simple installation. A friend and I did this install in less than an hour, start to finish.
I am now able to tow my trailer & carry the quads to the dunes.
Thanks for everything.
I will recommend etrailer.com to all my friends.
The hitch itself was easy to install on my model flex. Four bolts and three muffler hangers removed and re-installed, took about 20 minutes. The reason I did not give 5 stars is the packaging is sub-par. I ordered the wrong hitch to begin with and both boxes arrived with holes busted in the sides, the hitch was loose inside and one box had lost half of staples holding it shut. I was surprised that the wire harness I ordered didn't fall out.
Very good quality product, Curt hitch for a dual exhaust Ford Flex, and super speedy filling the order and delivery. Bonus, shipping was FREE for the trailer hitch! I saved a ton of money, less than half the price of uhaul and Sears, although I needed to install it myself (it was an easy install.) I definitely recommend this business, my friend who had a great experience referred me and I will do the same because I am so pleased, thanks!
-.
Fit perfectly
Suggest a can of dry lubricant to help remove the rubber hangers for the exhaust system.
Can be done with the car on the ground. It was easier when one side was lifted with a jack. Put a block under the tire for saftey.
Nice doing business with this company
We love quality of this Hitch Receiver. We are a biking family and use it to load up our family bicycles. etrailer make the install process easy with online videos. I would definitely buy from them again.
It came before it said it would. The only thing is the cardboard inside of the box let go but so far looks like no damage. I have not installed it yet. Will update when I do. Great customer service.
Philip
1/30/2020
My son and I installed it. I havent had the chance to use it. I put it on the Flex for our trailer that we tow behind our Motorhome. We havent used the trailer since last April, so I havent hooked it up to the flex to put it away yet.
Hitch fit perfectly. Quality and good looking once under Flex. Takes a little longer when you install it laying on your back on garage floor but easy enough for any one with a little experience can do. Held it up with two jack stands and went in pretty easy. Have used Curt products before and always happy with them. etrailer is always the place to go for any item needed. Thanks....
This hitch fit our 2014 Ford Flex (non-ecoboost) perfectly. Only problem was the installation instructions did not match our Flex. The instructions were for a Ecoboost Flex and we have a non-Ecoboost model. A quick call to Curt resolved the issue. What should be stated on the website is that this hitch will fit both Ecoboost and non-Ecoboost models.
Fit on this was perfect. Installation was super easy and only took about 30 mins. The only time I needed another hand was when trying to bolt the hitch into place, but my 11 year old was able to hold it up long enough.
Fits Ford Flex well. Easy enough to install especially after watching etrailer video. Drove car up onto two 1 inch thick blocks to create working room underneath. Lowering mufflers was about what I expected. Used only a lubricant and a screwdriver. Delivery came quickly.
Hitch arrived when scheduled. Everything was in the box as expected. Installation was around 45 minutes and the hitch fits perfectly. Courteous service and etrailer answered the phone...on a Saturday, when I needed them too. It was nice to have free shipping as well. I would, and did recommned etrailer to a friend.
THE TRAILER HITCH WAS NICE-- THE WIRING WAS NICE --
TO INSTALL BOTH TOOK MY FRIEND AND I LESS THEN
2 HOURS .--GREAT PEOPLE TO DEAL WITH --THANKS
Do you have a question about this Trailer Hitch?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Chris M.
5/30/2017
Worked well with no issues. Used for about 6 months, then got another Flex. Need to swap it in as well.